component

AT24C02C-STUM-T-TUDI

Public Made by Adom

by adom

Tudi EEPROM, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentmemoryat24c02c-stum-t-tudifactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
at24c02c-stum-t-tudi / README.md
History Download
Ray Publish 0.1.0 c91ced8 3d ago

AT24C02C-STUM-T-TUDI

Tudi · EEPROM · SOT-23-5

AT24C02C-STUM-T-TUDI from Tudi, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SCL input Serial clock input: data is positive-edge clocked into the EEPROM and negative-edge clocked out of it.
2 GND power_in Ground reference for the device.
3 SDA bidirectional Bidirectional open-drain serial data pin, normally pulled high by an external device and wire-ORable with other open-drain or open-collector devices; data may change only while SCL is low.
4 VCC power_in Power supply: 1.7 V to 5.5 V at 400 kHz, or 2.5 V to 5.5 V at 1 MHz.
5 WP input Write protect: tying to GND allows normal read/write operation, while tying to VCC enables hardware write protection of the full array.

Key specifications

Parameter Value
Manufacturer Tudi
Package SOT-23-5
Category Memory
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC1 1.7 5.5 V @400kHz 10
Supply Voltage VCC2 2.5 5.5 V @1MHz 10
Supply Current READ IR 0.14 0.3 mA VCC=5.0V READ @ 400kHz 10
Supply Current WRITE IW 0.28 0.5 mA VCC=5.0V WRITE @ 400kHz 10
Standby Supply Current ISB 0.03 0.5 μA VCC=5.0V VIN=VCC or VSS 10
Input Leakage Current ILI 0.1 1 μA VIN=VCC or VSS 10
Output Leakage Current ILO 0.05 1 μA VOUT=VCC or VSS 10
Input Low Level VIL -0.3 V VCC=1.7V to 5.5V 10
Output Low Level VOL1 0.2 V VCC=1.7V, IOL=0.15mA 10
Output Low Level VOL2 0.4 V VCC=5.0V, IOL=3.0mA 10
Input/Output Capacitance (SDA) CI/O 8 pF VIO=0V 10
Input Capacitance (A0,A1,A2,SCL) CIN 6 pF VIN=0V 10
Clock Frequency, SCL fSCL 1000 kHz 11
Clock Pulse Width Low tLOW 0.5 μs 11
Clock Pulse Width High tHIGH 0.26 μs 11
Noise Suppression Time tI 50 ns 11
Clock Low to Data Out Valid tAA 0.45 μs 11
Bus free time before new transmission tBUF 0.5 μs 11
Start Hold Time tHD:STA 0.26 μs 11
Start Setup Time tSU:STA 0.26 μs 11
Data In Hold Time tHD:DAT 0 μs 11
Data In Setup Time tSU:DAT 50 ns 11
Stop Setup Time tSU:STO 0.26 μs 11
Data Out Hold Time tDH 50 ns 11
Write Cycle Time tWR 3 ms 11
DC Supply Voltage VCC -0.3 6.5 V 10
Storage Temperature TSTG -65 150 ℃ 10
Ambient Operating Temperature TA -40 85 ℃ 10

CAD (KiCad official)

  • Symbol: AT24C02C-STUM-T-TUDI
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: at24c02c-stum-t-tudi-etched.step / at24c02c-stum-t-tudi-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); at24c02c-stum-t-tudi.step / at24c02c-stum-t-tudi.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Tudi datasheet (18 pp, sha256 92e7bf23fba18420, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF