component

AT24C02C-PUM-TUDI

Public Made by Adom

by adom

Tudi EEPROM, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentmemoryat24c02c-pum-tudifactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
at24c02c-pum-tudi / README.md
History Download
Ray Publish 0.1.0 1ec3d61 16d ago

AT24C02C-PUM-TUDI

Tudi · EEPROM · DIP-8

AT24C02C-PUM-TUDI from Tudi, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Device address input hard-wired to set the chip's bus address; it is compared against the device address word and is biased low internally if left floating.
2 A1 input Device address input hard-wired to set the chip's bus address; it is compared against the device address word and is biased low internally if left floating.
3 A2 input Device address input hard-wired to set the chip's bus address, allowing up to eight devices on one bus; it is biased low internally if left floating.
4 GND power_in Ground reference for the device.
5 SDA bidirectional Bidirectional serial data pin; it is open-drain driven and may be wire-ORed with other open-drain or open-collector devices.
6 SCL input Serial clock input; data is clocked into the device on the positive edge and out of the device on the negative edge.
7 WP input Write protect input: tying it to GND allows normal read/write operation, while tying it to VCC enables write protection of the full array.
8 VCC power_in Power supply pin; the datasheet specifies VCC from 1.7V to 5.5V (1.7V to 5.5V at 400kHz, 2.5V to 5.5V at 1MHz).

Key specifications

Parameter Value
Manufacturer Tudi
Package DIP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC Supply Voltage -0.3 6.5 V 10
Storage Temperature -65 150 ℃ 10
Operating temperature range (TA, no grade suffix) TA -40 85 ℃ 24C01/24C02 range, VCC=+1.7V to +5.5V @400kHz; VCC=+2.5V to +5.5V @1MHz 10
Supply Voltage VCC1 1.7 5.5 V @400kHz 10
Supply Voltage VCC2 2.5 5.5 V @1MHz 10
Supply Current READ IR 0.14 0.3 mA VCC=5.0V, READ @ 400kHz 10
Supply Current WRITE IW 0.28 0.5 mA VCC=5.0V, WRITE @ 400kHz 10
Standby Supply Current ISB 0.03 0.5 μA VCC=5.0V, VIN=VCC or VSS 10
Input Leakage Current ILI 0.1 1 μA VIN=VCC or VSS 10
Output Leakage Current ILO 0.05 1 μA VOUT=VCC or VSS 10
Input Low Level VIL -0.3 V VCC=1.7V to 5.5V; max printed as VCC×0.3 10
Output Low Level VCC=1.7V VOL1 0.2 V IOL=0.15mA 10
Output Low Level VCC=5.0V VOL2 0.4 V IOL=3.0mA 10
Input/Output Capacitance (SDA) CI/O 8 pF VIO=0V 10
Input Capacitance (A0,A1,A2,SCL) CIN 6 pF VIN=0V 10
Clock Frequency, SCL fSCL 1000 kHz 11
Clock Pulse Width Low tLOW 0.5 μs 11
Clock Pulse Width High tHIGH 0.26 μs 11
Noise Suppression Time tI 50 ns 11
Clock Low to Data Out Valid tAA 0.45 μs 11
Bus free time before new transmission tBUF 0.5 μs 11
Start Hold Time tHD:STA 0.26 μs 11
Start Setup Time tSU:STA 0.26 μs 11
Data In Hold Time tHD:DAT 0 μs 11
Data In Setup Time tSU:DAT 50 ns 11
Stop Setup Time tSU:STO 0.26 μs 11
Data Out Hold Time tDH 50 ns 11
Write Cycle Time tWR 3 ms 11

CAD (KiCad official)

  • Symbol: AT24C02C-PUM-TUDI
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: at24c02c-pum-tudi-etched.step / at24c02c-pum-tudi-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); at24c02c-pum-tudi.step / at24c02c-pum-tudi.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Tudi datasheet (18 pp, sha256 2053e22283b47403, retrieved 2026-10-15, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF