AT24C01C-XHM-T-TUDI

{
  "slug": "at24c01c-xhm-t-tudi",
  "version": "0.1.0",
  "type": "component",
  "description": "Tudi EEPROM, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "at24c01c-xhm-t-tudi",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "at24c01c-xhm-t-tudi.kicad_sym",
    "at24c01c-xhm-t-tudi.kicad_mod",
    "at24c01c-xhm-t-tudi.glb",
    "at24c01c-xhm-t-tudi.step",
    "at24c01c-xhm-t-tudi.lbr",
    "docs/hero.png",
    "docs/at24c01c-xhm-t-tudi-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "at24c01c-xhm-t-tudi-hero.glb",
    "at24c01c-xhm-t-tudi-hero.overlay.json",
    "at24c01c-xhm-t-tudi-etched.glb"
  ],
  "component": {
    "mpn": "AT24C01C-XHM-T-TUDI",
    "manufacturer": "Tudi",
    "package": "TSSOP-8",
    "pin_count": 8,
    "category": "Memory",
    "subcategory": "EEPROM",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603351096962265088",
    "parts": {
      "symbol": "at24c01c-xhm-t-tudi.kicad_sym",
      "footprint": "at24c01c-xhm-t-tudi.kicad_mod",
      "model_3d": "at24c01c-xhm-t-tudi-hero.glb",
      "model_3d_plain": "at24c01c-xhm-t-tudi-etched.glb",
      "model_3d_step": "at24c01c-xhm-t-tudi-etched.step",
      "model_3d_step_plain": "at24c01c-xhm-t-tudi.step",
      "lbr": "at24c01c-xhm-t-tudi.lbr"
    },
    "distributor_links": {
      "lcsc": "C22469212"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T08:53:32Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A0",
        "type": "input",
        "description": "Device address input, hardwired to set the chip's bus address; an internal circuit biases it low if left floating."
      },
      {
        "number": "2",
        "name": "A1",
        "type": "input",
        "description": "Device address input, hardwired to set the chip's bus address; an internal circuit biases it low if left floating."
      },
      {
        "number": "3",
        "name": "A2",
        "type": "input",
        "description": "Device address input, hardwired to set the chip's bus address; an internal circuit biases it low if left floating."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device; the write protect pin must be connected to GND for normal read/write operation."
      },
      {
        "number": "5",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Open-drain serial data pin that may change only while SCL is low and may be wire-ORed with other open-drain devices."
      },
      {
        "number": "6",
        "name": "SCL",
        "type": "input",
        "description": "Serial clock input that clocks data into the device on its positive edge and out on its negative edge."
      },
      {
        "number": "7",
        "name": "WP",
        "type": "input",
        "description": "Write protect input: connected to VCC it enables hardware write protection of the full array, and connected to GND it allows normal read/write operations."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply, 1.7 V to 5.5 V at 400 kHz and 2.5 V to 5.5 V at 1 MHz."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The page 2 pin-configuration drawing is scrambled in the text extract, so the 8-lead TSSOP pin numbe; The datasheet text does not map the ordering code AT24C01C-XHM-T to a package. The TSSOP-8 is listed"
        ],
        "pages_sent": 18,
        "cost_usd": 0.0678,
        "at": "2026-10-18T08:52:21"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603351096962265088",
        "pages": 18,
        "sha256": "ad7501132ec29638",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "at24c01c-xhm-t-tudi.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cf28a51742b2e31065e201d1b313207140cbfb49062efd938788f7a310d02738",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "at24c01c-xhm-t-tudi-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f52c5f409980f826a1fefcccd61f4b344200971e45887d68efdc33ea912bf1de",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}