ASM330LHHTR

{
  "slug": "asm330lhhtr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMICROELECTRONICS Global Sourcing Parts, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "asm330lhhtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "asm330lhhtr.kicad_sym",
    "asm330lhhtr.kicad_mod",
    "asm330lhhtr.glb",
    "asm330lhhtr.step",
    "asm330lhhtr.lbr",
    "docs/hero.png",
    "docs/asm330lhhtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "asm330lhhtr-hero.glb",
    "asm330lhhtr-hero.overlay.json",
    "asm330lhhtr-etched.glb"
  ],
  "component": {
    "mpn": "ASM330LHHTR",
    "manufacturer": "STMICROELECTRONICS",
    "package": "LGA-14(2.5x3)",
    "pin_count": 14,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589040558115598336",
    "parts": {
      "symbol": "asm330lhhtr.kicad_sym",
      "footprint": "asm330lhhtr.kicad_mod",
      "model_3d": "asm330lhhtr-hero.glb",
      "model_3d_plain": "asm330lhhtr-etched.glb",
      "model_3d_step": "asm330lhhtr-etched.step",
      "model_3d_step_plain": "asm330lhhtr.step",
      "lbr": "asm330lhhtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C459826",
      "digikey": "497-19078-2-ND",
      "mouser": "511-ASM330LHHTR"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T03:35:18Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-19078-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-ASM330LHHTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SDO/SA0",
        "type": "bidirectional",
        "description": "SPI 4-wire serial data output (SDO) and I2C least significant bit of the device address (SA0)."
      },
      {
        "number": "2",
        "name": "RES",
        "type": "passive",
        "description": "Reserved; connect to VDDIO or GND."
      },
      {
        "number": "3",
        "name": "RES",
        "type": "passive",
        "description": "Reserved; connect to VDDIO or GND."
      },
      {
        "number": "4",
        "name": "INT1",
        "type": "output",
        "description": "Programmable interrupt #1; must be set to '0' or left unconnected during power-on."
      },
      {
        "number": "5",
        "name": "Vdd_IO",
        "type": "power_in",
        "description": "Power supply for I/O pins; recommended 100 nF filter capacitor."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Connect to GND (printed as GNSD in the pin table)."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Connect to GND."
      },
      {
        "number": "8",
        "name": "Vdd",
        "type": "power_in",
        "description": "Power supply; recommended 100 nF plus 10 µF capacitors."
      },
      {
        "number": "9",
        "name": "INT2",
        "type": "bidirectional",
        "description": "Programmable interrupt #2 (INT2) / Data enable (DEN)."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "Leave unconnected."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "Leave unconnected."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "I2C/SPI mode selection (1: SPI idle mode / I2C communication enabled; 0: SPI communication mode / I2C disabled and reset)."
      },
      {
        "number": "13",
        "name": "SCL",
        "type": "input",
        "description": "I2C serial clock (SCL) / SPI serial port clock (SPC)."
      },
      {
        "number": "14",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C serial data (SDA), SPI serial data input (SDI), and 3-wire interface serial data output (SDO)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 1 is multi-function (SDO in SPI, SA0 in I2C). Typed as bidirectional because it is an output in ; Pins 2 and 3 are printed as RES with only the instruction 'Connect to VDDIO or GND'. Typed as passiv; Pin 6 name is printed as 'GNSD', which appears to be a typo for GND. Kept as printed and typed power"
        ],
        "pages_sent": 20,
        "cost_usd": 0.1098,
        "at": "2026-10-17T03:31:58"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589040558115598336",
        "pages": 84,
        "sha256": "5447ee161020bdf3",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "asm330lhhtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.5,
          0.78
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a441fc384db400c96db6affec2f9c22a5d76b0729e0f2fc46c53746be60b76ca",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "asm330lhhtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.5,
          0.78
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8ad364d6bcb12b0203a9bb9333b4d3388e0b5fd00229835c74603f762f7de2a9",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}