ASM330LHBTR

{
  "slug": "asm330lhbtr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Position Sensor, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "asm330lhbtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "asm330lhbtr.kicad_sym",
    "asm330lhbtr.kicad_mod",
    "asm330lhbtr.glb",
    "asm330lhbtr.step",
    "asm330lhbtr.lbr",
    "docs/hero.png",
    "docs/asm330lhbtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "asm330lhbtr-hero.glb",
    "asm330lhbtr-hero.overlay.json",
    "asm330lhbtr-etched.glb"
  ],
  "component": {
    "mpn": "ASM330LHBTR",
    "manufacturer": "STMicroelectronics",
    "package": "LGA-14(2.5x3)",
    "pin_count": 14,
    "category": "Sensors",
    "subcategory": "Position Sensor",
    "datasheet": "https://www.st.com/resource/en/datasheet/asm330lhbtr.pdf",
    "parts": {
      "symbol": "asm330lhbtr.kicad_sym",
      "footprint": "asm330lhbtr.kicad_mod",
      "model_3d": "asm330lhbtr-hero.glb",
      "model_3d_plain": "asm330lhbtr-etched.glb",
      "model_3d_step": "asm330lhbtr-etched.step",
      "model_3d_step_plain": "asm330lhbtr.step",
      "lbr": "asm330lhbtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C5712251",
      "digikey": "497-ASM330LHBTR-ND",
      "mouser": "511-ASM330LHBTR"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T01:18:15Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-ASM330LHBTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-ASM330LHBTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SDO/SA0",
        "type": "bidirectional",
        "description": "Serves as SPI 4-wire serial data output (SDO), or as the I²C/MIPI I3CSM least significant bit of the device address (SA0), which is set by connecting the pin to Vdd_IO (address 1101011b) or GND (address 1101010b)."
      },
      {
        "number": "2",
        "name": "RES",
        "type": "passive",
        "description": "Reserved pin that must be connected to Vdd_IO or GND."
      },
      {
        "number": "3",
        "name": "RES",
        "type": "passive",
        "description": "Reserved pin that must be connected to Vdd_IO or GND."
      },
      {
        "number": "4",
        "name": "INT1",
        "type": "bidirectional",
        "description": "Programmable interrupt 1 in I²C and SPI modes; it must be set to 0 or left unconnected during power-on when the I²C/SPI interfaces are used, and must be set to 1 when the device is used as a MIPI I3CSM pure slave."
      },
      {
        "number": "5",
        "name": "Vdd_IO",
        "type": "power_in",
        "description": "Power supply for the I/O pins, with a recommended 100 nF filter capacitor."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "Not internally connected; may be connected to Vdd_IO or GND or left unconnected."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "0 V supply."
      },
      {
        "number": "8",
        "name": "Vdd",
        "type": "power_in",
        "description": "Main power supply for the device core, with a recommended 100 nF plus 10 µF capacitors; the operational supply range is 1.71 V to 3.6 V."
      },
      {
        "number": "9",
        "name": "INT2",
        "type": "output",
        "description": "Programmable interrupt 2 (INT2) / data enable (DEN); the output is forced to ground by default."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "Leave unconnected; the pin is to be left electrically unconnected and soldered to the PCB."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "Leave unconnected; the pin is to be left electrically unconnected and soldered to the PCB."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "I²C/MIPI I3CSM/SPI mode selection: 1 selects SPI idle mode with I²C/MIPI I3CSM enabled, 0 selects SPI communication mode with I²C/MIPI I3CSM disabled."
      },
      {
        "number": "13",
        "name": "SCL",
        "type": "input",
        "description": "I²C/MIPI I3CSM serial clock (SCL), or SPI serial port clock (SPC)."
      },
      {
        "number": "14",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I²C/MIPI I3CSM serial data (SDA); in SPI mode it is the serial data input (SDI), or the 3-wire serial data output (SDO) in 3-wire mode."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pins 2 and 3 are named RES in Table 1 (page 8) but MSDA and MSCL in Table 18 (page 36), where they a; Pin 6 is NC with permitted connections to Vdd_IO, GND, or unconnected; its ERC class was set to pass; The package is LGA-14L 2.5 x 3.0 mm. Figure 23 gives height 0.86 mm max, while the cover page gives "
        ],
        "pages_sent": 24,
        "cost_usd": 0.0878,
        "at": "2026-10-31T01:17:19"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/asm330lhbtr.pdf",
        "pages": 131,
        "sha256": "a397954d22cf6ad0",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "asm330lhbtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.5,
          0.78
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a441fc384db400c96db6affec2f9c22a5d76b0729e0f2fc46c53746be60b76ca",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "asm330lhbtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.5,
          0.78
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2af8625b1eab2d7b90b4eaf859aacf59a2e237d2fdcf6773c94933f4583a9546",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "LGA-14L",
      "source_page": 116,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 2.5,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.86,
        "range_mm": [
          null,
          0.86
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "asm330lhbtr.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}