Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AS358AP-E1

Diodes Incorporated · Operational Amplifier · DIP-8

AS358AP-E1 from Diodes Incorporated, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTPUT 1 output Output of op-amp channel 1; the large output voltage swing is 0 V to VCC - 1.5 V.
2 INPUT 1- input Inverting input of op-amp channel 1; the input common-mode range includes ground and extends up to VCC - 1.5 V, and it must not be driven more than 0.3 V below ground (at +25°C).
3 INPUT 1+ input Non-inverting input of op-amp channel 1; the input common-mode range includes ground and extends up to VCC - 1.5 V, and it must not be driven more than 0.3 V below ground (at +25°C).
4 GND power_in Ground reference (GND = 0 V) for the device.
5 INPUT 2+ input Non-inverting input of op-amp channel 2; the input common-mode range includes ground and extends up to VCC - 1.5 V, and it must not be driven more than 0.3 V below ground (at +25°C).
6 INPUT 2- input Inverting input of op-amp channel 2; the input common-mode range includes ground and extends up to VCC - 1.5 V, and it must not be driven more than 0.3 V below ground (at +25°C).
7 OUTPUT 2 output Output of op-amp channel 2; the large output voltage swing is 0 V to VCC - 1.5 V.
8 VCC power_in Positive power supply: 3 V to 36 V single supply, or ±1.5 V to ±18 V dual supplies.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package DIP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage (AS358A, TA = +25°C) VIO 2 3 mV VO = 1.4V, RS = 0Ω, VCC = 5V to 30V 5
Input Offset Voltage (AS358A, over -40°C to +85°C, bold) VIO 5 mV VO = 1.4V, RS = 0Ω, VCC = 5V to 30V; over -40°C to +85°C 5
Input Bias Current (TA = +25°C) IBIAS 20 200 nA IIN+ or IIN-, VCM = 0V 5
Input Bias Current (over -40°C to +85°C, bold) IBIAS 200 nA IIN+ or IIN-, VCM = 0V; over -40°C to +85°C 5
Input Offset Current (TA = +25°C) IIO 5 30 nA IIN+ - IIN-, VCM = 0V 5
Input Offset Current (over -40°C to +85°C, bold) IIO 100 nA IIN+ - IIN-, VCM = 0V; over -40°C to +85°C 5
Input Common Mode Voltage Range VIR 0 V VCC = 30V 5
Supply Current (VCC = 30V, over -40°C to +85°C) ICC 0.7 2 mA TA = -40°C to +85°C, RL = ∞, VCC = 30V 5
Supply Current (VCC = 5V, over -40°C to +85°C) ICC 0.5 1.2 mA TA = -40°C to +85°C, RL = ∞, VCC = 5V 5
Large Signal Voltage Gain (TA = +25°C) GV 85 100 dB VCC = 15V, VO = 1V to 11V, RL ≥ 2kΩ 5
Large Signal Voltage Gain (over -40°C to +85°C, bold) GV 80 dB VCC = 15V, VO = 1V to 11V, RL ≥ 2kΩ; over -40°C to +85°C 5
Common Mode Rejection Ratio (TA = +25°C) CMRR 60 70 dB DC, VCM = 0V to (VCC-1.5)V 5
Common Mode Rejection Ratio (over -40°C to +85°C, bold) CMRR 60 dB DC, VCM = 0V to (VCC-1.5)V; over -40°C to +85°C 5
Power Supply Rejection Ratio (TA = +25°C) PSRR 70 100 dB VCC = 5V to 30V 5
Power Supply Rejection Ratio (over -40°C to +85°C, bold) PSRR 60 dB VCC = 5V to 30V; over -40°C to +85°C 5
Output Current Source (TA = +25°C) ISOURCE 20 40 mA VIN+ = 1V, VIN- = 0V, VCC = 15V, VO = 2V 5
Output Current Source (over -40°C to +85°C, bold) ISOURCE 20 mA VIN+ = 1V, VIN- = 0V, VCC = 15V, VO = 2V; over -40°C to +85°C 5
Output Current Sink (TA = +25°C) ISINK 10 15 mA VIN+ = 0V, VIN- = 1V, VCC = 15V, VO = 2V 5
Output Current Sink (over -40°C to +85°C, bold) ISINK 5 mA VIN+ = 0V, VIN- = 1V, VCC = 15V, VO = 2V; over -40°C to +85°C 5
Output Current Sink (low output voltage) ISINK 12 50 µA VIN+ = 0V, VIN- = 1V, VCC = 15V, VO = 0.2V 5
Output Short Circuit Current to Ground ISC 40 60 mA VCC = 15V 5
Output Voltage Swing High (TA = +25°C) VOH 26 V VCC = 30V, RL = 2kΩ 5
Output Voltage Swing High (over -40°C to +85°C, bold) VOH 26 V VCC = 30V, RL = 2kΩ; over -40°C to +85°C 5
Output Voltage Swing High (TA = +25°C) VOH 27 28 V VCC = 30V, RL = 10kΩ 5
Output Voltage Swing High (over -40°C to +85°C, bold) VOH 27 V VCC = 30V, RL = 10kΩ; over -40°C to +85°C 5
Output Voltage Swing Low (TA = +25°C) VOL 5 20 mV VCC = 5V, RL = 10kΩ 5
Output Voltage Swing Low (over -40°C to +85°C, bold) VOL 30 mV VCC = 5V, RL = 10kΩ; over -40°C to +85°C 5
Average Temperature Coefficient of Input Offset Voltage ∆VIO/∆T 7 µV/°C TA = -40°C to +85°C 5
Supply Voltage VCC 3 36 V 4
Ambient Operating Temperature Range TA -40 85 °C 4
Power Supply Voltage VCC 40 V 4
Differential Input Voltage VID 40 V 4
Input Voltage VIC -0.3 40 V 4
Power Dissipation (PDIP-8) PD 830 mW TA = +25°C 4
Operating Junction Temperature TJ 150 °C 4
Storage Temperature Range TSTG -65 150 °C 4
Lead Temperature (Soldering) TLEAD 260 °C Soldering, 10 Seconds 4

CAD (KiCad official)

  • Symbol: AS358AP-E1
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: as358ap-e1-etched.step / as358ap-e1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); as358ap-e1.step / as358ap-e1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (19 pp, sha256 c4ecaeb52ae68a65, retrieved 2026-10-16, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF