component
APX823-40W5G-7
Public Made by Adomby adom
Diodes Incorporated Monitors & Reset Circuits, SOT-25. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
APX823-40W5G-7
Diodes Incorporated · Monitors & Reset Circuits · SOT-25
APX823-40W5G-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low reset output that is asserted when VCC rises above 1.1V and stays low while VCC is below VTH- (4.00V typ. for the -40 option), then returns high after the 200ms typ. delay td. |
| 2 | GND | power_in | Ground. |
| 3 | MR | input | Active-low manual reset input with an internal 60kΩ typ. pull-up, where a low level causes RESET to become active and pulse width of at least 100ns is required. |
| 4 | WDI | input | Watchdog input triggered by a positive or negative transition, where failing to retrigger within the 1.6s typ. time-out (1.12s min, 2.4s max) asserts RESET for td and leaving it unconnected disables the watchdog. |
| 5 | VCC | power_in | Operating voltage input rated 1.1V to 5.5V recommended and 6.0V absolute maximum, with a 0.1μF ceramic bypass capacitor recommended near the supply terminals. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 1.1 | 5.5 | V | 3 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | oC | 3 | ||
| Supply Voltage | VCC | 6 | V | 3 | |||
| Input Current VCC | ICC | 20 | mA | 3 | |||
| Maximum High Output Current | IO | 20 | mA | 3 | |||
| Operating Junction Temperature Range | TOP | -40 | 105 | °C | 3 | ||
| Storage Temperature Range | TST | -65 | 150 | °C | 3 | ||
| ESD HBM Human Body Model ESD Protection | ESD HBM | 5 | KV | 3 | |||
| ESD MM Machine Model ESD Protection | ESD MM | 200 | V | 3 | |||
| Negative-going Input Threshold Voltage (APX823-40) | VTH- | 3.93 | 4 | 4.08 | V | TA = 0 oC -85oC | 4 |
| Negative-going Input Threshold Voltage (APX823-40) | VTH- | 3.82 | 4 | 4.16 | V | TA= -40oC -85oC | 4 |
| Power-up Reset Voltage | VRESET | 0.4 | V | VCC > 1.1V, IOL=20μA | 4 | ||
| Supply Current | ICC | 30 | 40 | μA | WDI and MR Unconnected, Outputs unconnected; VCC = VTH-+0.2V | 5 | |
| High-level Input Current WDI | IIH | 120 | 160 | μA | WDI=VCC | 5 | |
| Low-level Input Current WDI | IIL | 120 | 160 | μA | WDI=0.3V, VCC=5.5V | 5 | |
| Average High-level Input Current | IIH(AV) | 120 | μA | WDI=VCC, Time average (dc=88%) | 5 | ||
| Average Low-level Input Current | IIL(AV) | -15 | μA | WDI=0.3V, VCC=5.5V time average (dc=12%) | 5 | ||
| Hysteresis at VCC Input | Vhys | 50 | mV | 5 | |||
| Internal Pull-up Resistor at MR | 60 | kΩ | 5 | ||||
| VOUT Temperature Coefficient | TC | 50 | ppm/oC | 5 | |||
| Input Capacitance at MR, WDI | Ci | 5 | pF | VI = 0V to 5.5V | 5 | ||
| Thermal Resistance Junction-to-Ambient SOT25 | θJA | 161 | oC/W | Note 6: devices mounted on FR-4 PCB, 2oz copper, minimum recommended pad layout | 5 | ||
| Thermal Resistance Junction-to-Case SOT25 | θJC | 27 | oC/W | Note 6 | 5 | ||
| Pulse Width at WDI | tW | 50 | ns | VCC> VTH-+0.2V, VIL=0.3VCC, VIH=0.7VCC | 6 | ||
| Pulse Width at MR | tW | 100 | ns | VCC> VTH-+0.2V, VIL=0.3VCC, VIH=0.7VCC | 6 | ||
| Watchdog Time Out | ttout | 1.12 | 1.6 | 2.4 | s | VCC> VTH-+0.2V, See timing diagram | 6 |
| Delay Time | td | 140 | 200 | 280 | ms | VCC> VTH-+0.2V, See timing diagram | 6 |
| Propagation Delay Time, High-to-low-level Output MR to RESET delay (APX823) | tPHL | 0.1 | μs | VCC> VTH-+0.2V, VIL=0.3VCC, VIH=0.7VCC | 6 | ||
| VCC to RESET delay | tPHL | 25 | μs | VIL= VTH- -0.2V, VIH= VTH-+0.2V | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: | 12 |
CAD (KiCad official)
- Symbol:
APX823-40W5G-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
apx823-40w5g-7-etched.step/apx823-40w5g-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);apx823-40w5g-7.step/apx823-40w5g-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (13 pp, sha256
fdb2f5991123ff64, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# APX823-40W5G-7
**Diodes Incorporated** · Monitors & Reset Circuits · SOT-25
APX823-40W5G-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | output | Active-low reset output that is asserted when VCC rises above 1.1V and stays low while VCC is below VTH- (4.00V typ. for the -40 option), then returns high after the 200ms typ. delay td. |
| 2 | GND | power_in | Ground. |
| 3 | MR | input | Active-low manual reset input with an internal 60kΩ typ. pull-up, where a low level causes RESET to become active and pulse width of at least 100ns is required. |
| 4 | WDI | input | Watchdog input triggered by a positive or negative transition, where failing to retrigger within the 1.6s typ. time-out (1.12s min, 2.4s max) asserts RESET for td and leaving it unconnected disables the watchdog. |
| 5 | VCC | power_in | Operating voltage input rated 1.1V to 5.5V recommended and 6.0V absolute maximum, with a 0.1μF ceramic bypass capacitor recommended near the supply terminals. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Power Management ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 1.1 | | 5.5 | V | | 3 |
| Operating Ambient Temperature Range | TA | -40 | | 85 | oC | | 3 |
| Supply Voltage | VCC | | | 6 | V | | 3 |
| Input Current VCC | ICC | | | 20 | mA | | 3 |
| Maximum High Output Current | IO | | | 20 | mA | | 3 |
| Operating Junction Temperature Range | TOP | -40 | | 105 | °C | | 3 |
| Storage Temperature Range | TST | -65 | | 150 | °C | | 3 |
| ESD HBM Human Body Model ESD Protection | ESD HBM | | | 5 | KV | | 3 |
| ESD MM Machine Model ESD Protection | ESD MM | | | 200 | V | | 3 |
| Negative-going Input Threshold Voltage (APX823-40) | VTH- | 3.93 | 4 | 4.08 | V | TA = 0 oC -85oC | 4 |
| Negative-going Input Threshold Voltage (APX823-40) | VTH- | 3.82 | 4 | 4.16 | V | TA= -40oC -85oC | 4 |
| Power-up Reset Voltage | VRESET | | | 0.4 | V | VCC > 1.1V, IOL=20μA | 4 |
| Supply Current | ICC | | 30 | 40 | μA | WDI and MR Unconnected, Outputs unconnected; VCC = VTH-+0.2V | 5 |
| High-level Input Current WDI | IIH | | 120 | 160 | μA | WDI=VCC | 5 |
| Low-level Input Current WDI | IIL | | 120 | 160 | μA | WDI=0.3V, VCC=5.5V | 5 |
| Average High-level Input Current | IIH(AV) | | 120 | | μA | WDI=VCC, Time average (dc=88%) | 5 |
| Average Low-level Input Current | IIL(AV) | | -15 | | μA | WDI=0.3V, VCC=5.5V time average (dc=12%) | 5 |
| Hysteresis at VCC Input | Vhys | | 50 | | mV | | 5 |
| Internal Pull-up Resistor at MR | | | 60 | | kΩ | | 5 |
| VOUT Temperature Coefficient | TC | | 50 | | ppm/oC | | 5 |
| Input Capacitance at MR, WDI | Ci | | 5 | | pF | VI = 0V to 5.5V | 5 |
| Thermal Resistance Junction-to-Ambient SOT25 | θJA | | 161 | | oC/W | Note 6: devices mounted on FR-4 PCB, 2oz copper, minimum recommended pad layout | 5 |
| Thermal Resistance Junction-to-Case SOT25 | θJC | | 27 | | oC/W | Note 6 | 5 |
| Pulse Width at WDI | tW | 50 | | | ns | VCC> VTH-+0.2V, VIL=0.3VCC, VIH=0.7VCC | 6 |
| Pulse Width at MR | tW | 100 | | | ns | VCC> VTH-+0.2V, VIL=0.3VCC, VIH=0.7VCC | 6 |
| Watchdog Time Out | ttout | 1.12 | 1.6 | 2.4 | s | VCC> VTH-+0.2V, See timing diagram | 6 |
| Delay Time | td | 140 | 200 | 280 | ms | VCC> VTH-+0.2V, See timing diagram | 6 |
| Propagation Delay Time, High-to-low-level Output MR to RESET delay (APX823) | tPHL | | | 0.1 | μs | VCC> VTH-+0.2V, VIL=0.3VCC, VIH=0.7VCC | 6 |
| VCC to RESET delay | tPHL | | | 25 | μs | VIL= VTH- -0.2V, VIH= VTH-+0.2V | 6 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: | 12 |
## CAD (KiCad official)
- Symbol: `APX823-40W5G-7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files: `apx823-40w5g-7-etched.step` / `apx823-40w5g-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `apx823-40w5g-7.step` / `apx823-40w5g-7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/APX823-40W5G-7.pdf) (13 pp, sha256 `fdb2f5991123ff64`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/apx823-40w5g-7-datasheet.pdf)