component
APX810S05-29SA-7
Public Made by Adomby adom
Diodes Incorporated Supervisor And Reset ICs, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 17d ago |
| viewers | 17d ago |
| apx810s05-29sa-7-etched.glb | 17d ago |
| apx810s05-29sa-7-etched.step | 17d ago |
| apx810s05-29sa-7-hero.glb | 17d ago |
| apx810s05-29sa-7-hero.overlay.json | 17d ago |
| apx810s05-29sa-7.glb | 17d ago |
| apx810s05-29sa-7.kicad_mod | 17d ago |
| apx810s05-29sa-7.kicad_sym | 17d ago |
| apx810s05-29sa-7.lbr | 17d ago |
| apx810s05-29sa-7.step | 17d ago |
| package.json | 17d ago |
| page.json | 17d ago |
| README.md | 17d ago |
APX810S05-29SA-7
Diodes Incorporated · Supervisor And Reset ICs · SOT-23
APX810S05-29SA-7 from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the supervisor; the datasheet gives no electrical limit for this pin. |
| 2 | RESET | output | Push-pull active-high RESET output on the APX810S: it asserts when VCC falls below the reset threshold (VTH, 2.93 V typ for the -29 option) and stays asserted for the timeout after VCC rises above it (20/50/70 ms min/typ/max for the 05 option); VOH is at least 0.8·VCC at 150 µA source and VOL is at most 0.4 V at 3.2 mA sink. |
| 3 | VCC | power_in | Operating voltage input with a recommended supply range of 1.0 V to 5.5 V and an absolute maximum of -0.3 V to 6.0 V; typical supply current is 7 µA (16 µA max). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | -0.3 | 6 | V | 3 | ||
| RESET/RESET Voltage | VRESET | -0.3 | 6 | V | 3 | ||
| Supply Voltage | VCC | 1 | 5.5 | V | 3 | ||
| RESET/RESET Output Voltage | VRESET | 0 | 5.5 | V | 3 | ||
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 3 | ||
| Input Current | ICC | 20 | mA | 3 | |||
| Output Current | IO | 20 | mA | 3 | |||
| Supply Current | ICC | 7 | 16 | µA | VTH + 0.2V | 4 | |
| Reset Threshold Voltage (APX809SXX/810SXX-29 row) | VTH | 2.89 | 2.93 | 2.97 | V | TA = +25°C | 4 |
| RESET Output Voltage Low (APX810S) | VOL | 0.3 | V | VCC = VTH + 0.2V, ISINK = 1.2mA | 4 | ||
| RESET Output Voltage Low (APX810S) | VOL | 0.4 | V | VCC = VTH + 0.2V, ISINK = 3.2mA | 4 | ||
| Reset Active Timeout Period (APX810S05-XX) | tDELAY | 20 | 50 | 70 | ms | VCC ≥ 1.02 x VTH | 4 |
| ESD HBM (Human Body Model) | ESD | 6000 | V | HBM (Human Body Model) | 3 | ||
| ESD MM (Machine Model) | ESD | 600 | V | MM (Machine Model) | 3 | ||
| Junction Temperature Range | TJ | -40 | 150 | °C | 3 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Thermal Resistance Junction-to-Ambient SOT23 | θJA | 232 | °C/W | 3 | |||
| Thermal Resistance Junction-to-Case SOT23 | θJC | 87 | °C/W | 3 | |||
| VCC Drop to Delay | tS | 20 | µs | VCC = VTH to (VTH - 100mV) | 4 | ||
| Reset Threshold Voltage Temperature Coefficient | 30 | ppm/°C | TA = -40 to +125°C | 4 |
CAD (KiCad official)
- Symbol:
APX810S05-29SA-7 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
apx810s05-29sa-7-etched.step/apx810s05-29sa-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);apx810s05-29sa-7.step/apx810s05-29sa-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (10 pp, sha256
b644892b2c8d0948, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).