# APX810S00-23SA-7

**Diodes Incorporated** · Monitors & Reset Circuits · SOT-23

APX810S00-23SA-7 from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the device (SOT23 (SA) variant, per the Pin Descriptions table). |
| 2 | RESET | output | Push-pull reset output that is active high on the APX810S, asserting when VCC falls below the reset threshold and staying asserted for at least 240 ms after VCC rises above it. |
| 3 | VCC | power_in | Operating voltage input with a recommended supply range of 1.0 V to 5.5 V; the outputs are guaranteed valid down to VCC = 1 V. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23 |
| Category | Power Supply Chip |
| Pins | 3 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current | ICC |  | 7 | 16 | µA | VTH + 0.2V | 4 |
| Reset Threshold Voltage (-23 variant) | VTH | 2.22 | 2.25 | 2.29 | V | TA = +25°C | 4 |
| Reset Active Timeout Period (00 variant) | tDELAY | 1 | 1.7 | 3.3 | ms | VCC ≥ 1.02 x VTH | 4 |
| Reset Output Voltage Low (APX810S) | VOL |  |  | 0.3 | V | VCC = VTH + 0.2V, ISINK = 1.2mA | 4 |
| Reset Output Voltage Low (APX810S) | VOL |  |  | 0.4 | V | VCC = VTH + 0.2V, ISINK = 3.2mA | 4 |
| Reset Output Voltage High (APX810S) | VOH | 0.8 |  |  | VCC | 1.8V < VCC < VTH - 0.2, ISOURCE = 150µA | 4 |
| Reset Threshold Voltage Temperature Coefficient | ΔVTH/ΔT |  | 30 |  | ppm/°C | TA = -40 to +125°C | 4 |
| VCC Drop to Delay | tS |  | 20 |  | µs | VCC = VTH to (VTH - 100mV) | 4 |
| Supply Voltage | VCC | -0.3 |  | 6 | V |  | 3 |
| RESET/RESET Voltage | VRESET | -0.3 |  | 6 | V |  | 3 |
| Input Current | ICC |  |  | 20 | mA |  | 3 |
| Output Current | IO |  |  | 20 | mA |  | 3 |
| ESD HBM (Human Body Model) | ESD |  |  | 6000 | V | HBM | 3 |
| ESD MM (Machine Model) | ESD |  |  | 600 | V | MM | 3 |
| Junction Temperature Range | TJ | -40 |  | 150 | °C |  | 3 |
| Storage Temperature Range | TSTG | -65 |  | 150 | C |  | 3 |
| Thermal Resistance Junction-to-Ambient SOT23 | θJA |  | 232 |  | °C/W |  | 3 |
| Thermal Resistance Junction-to-Case SOT23 | θJC |  | 87 |  | °C/W |  | 3 |
| Operating Ambient Temperature Range | TA | -40 |  | 125 | °C |  | 3 |
| Supply Voltage | VCC | 1 |  | 5.5 | V |  | 3 |
| RESET/RESET Output Voltage | VRESET | 0 |  | 5.5 | V |  | 3 |

## CAD (land: KiCad; 3D: generated from the datasheet)

- Symbol: `APX810S00-23SA-7`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.025 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `apx810s00-23sa-7-etched.step` / `apx810s00-23sa-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `apx810s00-23sa-7.step` / `apx810s00-23sa-7.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/APX810S00-23SA-7.pdf) (10 pp, sha256 `b644892b2c8d0948`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

[Datasheet PDF](docs/apx810s00-23sa-7-datasheet.pdf)