component
APX810S-40SA-7
Public Made by Adomby adom
Diodes Incorporated Monitors & Reset Circuits, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAPX810S-40SA-7
Diodes Incorporated · Monitors & Reset Circuits · SOT-23
APX810S-40SA-7 from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the supervisor (SOT23 SA pin 1; pin 2 on the SR variant). |
| 2 | RESET | output | Push-pull reset output that is active high on the APX810S, asserted when VCC falls below the reset threshold and held for at least 240 ms after VCC rises above it; the datasheet's VRESET rating is -0.3 V to 6.0 V absolute maximum and 0 V to 5.5 V recommended. |
| 3 | VCC | power_in | Operating voltage input, specified at 1.0 V to 5.5 V recommended with an absolute maximum range of -0.3 V to 6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reset Threshold Voltage (-40 suffix) | VTH | 3.94 | 4 | 4.05 | V | TA = +25°C | 4 |
| Reset Active Timeout Period (APX809S/810S-XX, no output-type code) | tDELAY | 140 | 240 | 280 | ms | VCC ≥ 1.02 x VTH | 4 |
| Supply Current | ICC | 7 | 16 | μA | VTH + 0.2V | 4 | |
| RESET Output Voltage Low (APX810S) | VOL | 0.3 | V | VCC = VTH + 0.2V, ISINK = 1.2mA | 4 | ||
| RESET Output Voltage Low (APX810S) | VOL | 0.4 | V | VCC = VTH + 0.2V, ISINK = 3.2mA | 4 | ||
| RESET Output Voltage High (APX810S) | VOH | 0.8 | ×VCC | 1.8V < VCC < VTH - 0.2, ISOURCE = 150µA | 4 | ||
| Supply Voltage (absolute maximum) | VCC | -0.3 | 6 | V | 3 | ||
| RESET/RESET Voltage (absolute maximum) | VRESET | -0.3 | 6 | V | 3 | ||
| Input Current | ICC | 20 | mA | 3 | |||
| Output Current | IO | 20 | mA | 3 | |||
| ESD HBM (Human Body Model) | ESD | 6000 | V | HBM (Human Body Model) | 3 | ||
| ESD MM (Machine Model) | ESD | 600 | V | MM (Machine Model) | 3 | ||
| Junction Temperature Range | TJ | -40 | 150 | °C | 3 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 3 | ||
| Supply Voltage (recommended) | VCC | 1 | 5.5 | V | 3 | ||
| RESET/RESET Output Voltage (recommended) | VRESET | 0 | 5.5 | V | 3 | ||
| VCC Drop to Delay | tS | 20 | µs | VCC = VTH to (VTH - 100mV) | 4 | ||
| Reset Threshold Voltage Temperature Coefficient | 30 | ppm/°C | TA = -40 to +125°C | 4 | |||
| Thermal Resistance Junction-to-Ambient (SOT23) | θJA | 232 | °C/W | SOT23 | 3 | ||
| Thermal Resistance Junction-to-Case (SOT23) | θJC | 87 | °C/W | SOT23 | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
APX810S-40SA-7 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.025 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
apx810s-40sa-7-etched.step/apx810s-40sa-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);apx810s-40sa-7.step/apx810s-40sa-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (10 pp, sha256
b644892b2c8d0948, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).