APX810S-31SA-7

{
  "slug": "apx810s-31sa-7",
  "version": "0.1.0",
  "type": "component",
  "description": "Diodes Incorporated Monitors & Reset Circuits, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "apx810s-31sa-7",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "apx810s-31sa-7.kicad_sym",
    "apx810s-31sa-7.kicad_mod",
    "apx810s-31sa-7.glb",
    "apx810s-31sa-7.step",
    "apx810s-31sa-7.lbr",
    "docs/hero.png",
    "docs/apx810s-31sa-7-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "apx810s-31sa-7-hero.glb",
    "apx810s-31sa-7-hero.overlay.json",
    "apx810s-31sa-7-etched.glb"
  ],
  "component": {
    "mpn": "APX810S-31SA-7",
    "manufacturer": "Diodes Incorporated",
    "package": "SOT-23",
    "pin_count": 3,
    "category": "Power Supply Chip",
    "subcategory": "Monitors & Reset Circuits",
    "datasheet": "https://www.diodes.com/assets/Datasheets/APX810S-31SA-7.pdf",
    "parts": {
      "symbol": "apx810s-31sa-7.kicad_sym",
      "footprint": "apx810s-31sa-7.kicad_mod",
      "model_3d": "apx810s-31sa-7-hero.glb",
      "model_3d_plain": "apx810s-31sa-7-etched.glb",
      "model_3d_step": "apx810s-31sa-7-etched.step",
      "model_3d_step_plain": "apx810s-31sa-7.step",
      "lbr": "apx810s-31sa-7.lbr"
    },
    "distributor_links": {
      "lcsc": "C2067371",
      "digikey": "APX810S-31SA-7DITR-ND",
      "mouser": "621-APX810S-31SA-7"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T12:22:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "APX810S-31SA-7DITR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "621-APX810S-31SA-7",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "2",
        "name": "RESET",
        "type": "output",
        "description": "Active-high push-pull reset output (APX810S) that is asserted when VCC falls below the reset threshold and held for at least 240ms (typ. 240ms) after VCC rises above it, valid down to VCC = 1V."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Operating voltage input, 1.0V to 5.5V recommended, absolute maximum 6.0V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table prints the SA pin 2 name as 'RESET /RESET' (APX809S active low RESET bar, APX810S acti"
        ],
        "pages_sent": 10,
        "cost_usd": 0.077,
        "at": "2026-10-23T12:22:08"
      },
      "datasheet": {
        "url": "https://www.diodes.com/assets/Datasheets/APX810S-31SA-7.pdf",
        "pages": 10,
        "sha256": "b644892b2c8d0948",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 3,
        "described": 3,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "apx810s-31sa-7.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          3.0,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dd5d1711204e1d8d26cd11490923bd84340820baa69538c385a4300ec2539bc0",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "apx810s-31sa-7-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          3.0,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d017712c22f9448037a98ac121a56151a4b7be2f7b570cc91f78e93d2e4e2eed",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}