component
APX803S-26SA-7
Public Made by Adomby adom
Diodes Incorporated Supervisor and Reset ICs, SOT-23. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
apx803s-26sa-7: factory component page (tier=mfr)
3 files changed
+16−13
README.md+3−3@@ -8,9 +8,9 @@ APX803S-26SA-7 from Diodes Incorporated, in a SOT-23. Pinout and pin description | Pin | Name | Type | Function | |---|---|---|---|-| 1 | GND | power_in | Ground reference for the supervisor. Connect to system ground. |-| 2 | RESET | output | Active-low, open-drain reset output. Asserted low while VCC is below the reset threshold (VTH = 2.59-2.67 V for the -26 option) and held low for tDELAY (140-280 ms) after VCC rises above VTH. Requires an external pull-up resistor to a valid logic supply (VRESET rated 0 to 5.5 V, ISINK up to ~3.5 mA in spec, absolute-max IO = 20 mA). Guaranteed valid low for VCC > 1 V; becomes high-impedance below VCC ≈ 1 V. |-| 3 | VCC | power_in | Operating voltage input and monitored supply. Recommended operating range 1.0 V to 5.5 V (absolute max -0.3 V to +6.0 V). The internal comparator trips RESET when VCC falls below the factory-set threshold (VTH = 2.63 V typ. for the -26 option). Bypass with 100 nF (CIN) close to the pin. |+| 1 | GND | power_in | Device ground reference. Tie directly to the system ground plane. |+| 2 | RESET | output | Active-low, open-drain reset output. Asserts low when VCC falls below the 2.63V (typ) reset threshold and remains low for tDELAY (240ms typ) after VCC recovers. Requires an external pull-up resistor; guaranteed low for VCC > 1V and rated to sink up to 20mA (VOL <= 0.3V at 1.2mA). |+| 3 | VCC | power_in | Operating supply and monitored voltage input. Recommended range 1.0V to 5.5V, absolute max 6.0V. A 100nF ceramic decoupling capacitor to GND is recommended per the typical applications circuit. | ## Key specifications
apx803s-26sa-7.lbr+9−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Diodes Incorporated Supervisor and Reset ICs, SOT-23</description> <packages> <package name="SOT-23"> <description>3 pads, 3.4 x 2.5 mm. SOT, 3 Pin</description>@@ -82,6 +82,7 @@ </packages> <symbols> <symbol name="APX803S-26SA-7">+ <description>Diodes Incorporated Supervisor and Reset ICs, SOT-23</description> <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/> <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>@@ -95,7 +96,7 @@ </symbols> <devicesets> <deviceset name="APX803S-26SA-7" prefix="U">- <description></description>+ <description>Diodes Incorporated Supervisor and Reset ICs, SOT-23</description> <gates> <gate name="G$1" symbol="APX803S-26SA-7" x="0" y="0"/> </gates>@@ -106,7 +107,12 @@ <connect gate="G$1" pin="RESET" pad="2"/> <connect gate="G$1" pin="VCC" pad="3"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="APX803S-26SA-7" constant="no"/>+ <attribute name="MANUFACTURER" value="Diodes Incorporated" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+4−7@@ -32,19 +32,19 @@ "number": "1", "name": "GND", "type": "power_in",- "description": "Ground reference for the supervisor. Connect to system ground."+ "description": "Device ground reference. Tie directly to the system ground plane." }, { "number": "2", "name": "RESET", "type": "output",- "description": "Active-low, open-drain reset output. Asserted low while VCC is below the reset threshold (VTH = 2.59-2.67 V for the -26 option) and held low for tDELAY (140-280 ms) after VCC rises above VTH. Requires an external pull-up resistor to a valid logic supply (VRESET rated 0 to 5.5 V, ISINK up to ~3.5 mA in spec, absolute-max IO = 20 mA). Guaranteed valid low for VCC > 1 V; becomes high-impedance below VCC ≈ 1 V."+ "description": "Active-low, open-drain reset output. Asserts low when VCC falls below the 2.63V (typ) reset threshold and remains low for tDELAY (240ms typ) after VCC recovers. Requires an external pull-up resistor; guaranteed low for VCC > 1V and rated to sink up to 20mA (VOL <= 0.3V at 1.2mA)." }, { "number": "3", "name": "VCC", "type": "power_in",- "description": "Operating voltage input and monitored supply. Recommended operating range 1.0 V to 5.5 V (absolute max -0.3 V to +6.0 V). The internal comparator trips RESET when VCC falls below the factory-set threshold (VTH = 2.63 V typ. for the -26 option). Bypass with 100 nF (CIN) close to the pin."+ "description": "Operating supply and monitored voltage input. Recommended range 1.0V to 5.5V, absolute max 6.0V. A 100nF ceramic decoupling capacitor to GND is recommended per the typical applications circuit." } ], "provenance": {@@ -108,8 +108,5 @@ "docs/apx803s-26sa-7-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": {- "public": true- }+ ] }