Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

APX803S-26SA-7

Diodes Incorporated · Supervisor and Reset ICs · SOT-23

APX803S-26SA-7 from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Device ground reference. Tie directly to the system ground plane.
2 RESET output Active-low, open-drain reset output. Asserts low when VCC falls below the 2.63V (typ) reset threshold and remains low for tDELAY (240ms typ) after VCC recovers. Requires an external pull-up resistor; guaranteed low for VCC > 1V and rated to sink up to 20mA (VOL <= 0.3V at 1.2mA).
3 VCC power_in Operating supply and monitored voltage input. Recommended range 1.0V to 5.5V, absolute max 6.0V. A 100nF ceramic decoupling capacitor to GND is recommended per the typical applications circuit.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOT-23
Category PMIC
Pins 3

Ordering variants

  • APX803S-26SA-7
  • APX803S-26SA-7SR-7

CAD (KiCad official)

  • Symbol: APX803S-26SA-7
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: apx803s-26sa-7-etched.step / apx803s-26sa-7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); apx803s-26sa-7.step / apx803s-26sa-7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (9 pp, sha256 58d0867f60d9b289, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF