component
APX803-44SAG-7
Public Made by Adomby adom
Diodes Incorporated Supervisor And Reset ICs, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAPX803-44SAG-7
Diodes Incorporated · Supervisor And Reset ICs · SOT-23
APX803-44SAG-7 from Diodes Incorporated, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the device. |
| 2 | RESET | output | Active-low open-drain reset output that is asserted when VCC falls below the threshold and stays low for the reset timeout period (140ms min, 200ms typ) after VCC rises above it; guaranteed low for VCC > 1V, and the output voltage is rated 0 to 5.5V. |
| 3 | VCC | power_in | Operating voltage input and monitored supply, recommended 1.1V to 5.5V, with an absolute maximum of 6.0V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Recommended supply voltage VCC | VCC | 1.1 | 5.5 | V | 3 | ||
| Absolute maximum supply voltage VCC | VCC | -0.3 | 6 | V | 3 | ||
| Recommended RESET output voltage | VRESET | 0 | 5.5 | V | 3 | ||
| Absolute maximum RESET (open drain) voltage | VRESET | -0.3 | 6 | V | 3 | ||
| Recommended operating ambient temperature range | TA | -40 | 85 | °C | 3 | ||
| Absolute maximum operating junction temperature range | TOP | -40 | 105 | °C | 3 | ||
| Absolute maximum storage temperature range | TST | -65 | 150 | °C | 3 | ||
| Recommended input voltage | VIN | 0 | V | 3 | |||
| VCC rate of rise | dVCC/dt | 100 | V/µs | VCC = 0 to VT | 3 | ||
| ESD protection, Human Body Model | ESD HBM | 2 | kV | 3 | |||
| ESD protection, Machine Model | ESD MM | 200 | V | 3 | |||
| Input current, VCC | ICC | 20 | mA | 3 | |||
| Output current, RESET | IO | 20 | mA | 3 | |||
| Continuous power dissipation | PD | 400 | mW | TA = +70°C, de-rate 4mW/°C above +70°C | 3 | ||
| Supply current | ICC | 30 | 40 | μA | VTH + 0.2V | 4 | |
| Reset threshold, APX803-44 | VTH | 4.31 | 4.38 | 4.45 | V | TA = +25°C | 4 |
| RESET output voltage low | VOL | 0.3 | V | VCC = VTH -0.2, ISINK = 1.2mA | 4 | ||
| RESET output voltage low | VOL | 0.4 | V | VCC = VTH -0.2, ISINK = 3.5mA | 4 | ||
| RESET output high leakage current | IOH | 1 | µA | VCC > VTH +0.2 | 4 | ||
| Reset active timeout period | tDELAY | 140 | 200 | 280 | ms | APX803-XX, TA = 0°C to +85°C | 4 |
| Reset threshold tempco | 30 | ppm/°C | 4 | ||||
| VCC to RESET delay | tS | 20 | µs | VCC = VTH to (VTH - 100mV) | 4 | ||
| Reset threshold hysteresis | VTH-H - VTH-L | 40 | mV | 4 | |||
| Thermal resistance junction-to-ambient, SOT23 | θJA | 201 | °C/W | SOT23 (Note 4) | 4 | ||
| Thermal resistance junction-to-case, SOT23 | θJC | 56 | °C/W | SOT23 (Note 4) | 4 |
CAD (KiCad official)
- Symbol:
APX803-44SAG-7 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
apx803-44sag-7-etched.step/apx803-44sag-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);apx803-44sag-7.step/apx803-44sag-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (11 pp, sha256
49f1f0449cde1d5a, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).