component
APS11760LLHALT-0PL
Public Made by Adomby adom
Allegro MicroSystems LLC Linear Hall Sensors, SOT-23W. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAPS11760LLHALT-0PL
Allegro MicroSystems LLC · Linear Hall Sensors · SOT-23W
APS11760LLHALT-0PL from Allegro MicroSystems LLC, in a SOT-23W. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Connects the power supply to the chip; the datasheet specifies a supply voltage range of 3.3 to 24 V. |
| 2 | VOUT | output | Output from the circuit, which is an open-drain output; the absolute maximum output voltage is -0.3 to 32 V. |
| 3 | GND | power_in | Terminal for ground connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems LLC |
| Package | SOT-23W |
| Category | Magnetic Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3.3 | 24 | V | 6 | ||
| Average Supply Current (-xxx Option, TA = 85°C) | ICC(AVG)85C | 2 | 6 | 15 | µA | VCC = 12 V, TA = -40°C to 85°C, Output Off | 6 |
| Average Supply Current (-xxx Option, TA = 150°C) | ICC(AVG)150C | 2 | 11.3 | 40 | µA | TA = 150°C, Output Off | 6 |
| Supply Current, awake mode (APS11760) | ICC(EN) | 1 | 2.5 | 5 | mA | Device in awake mode | 6 |
| Supply Current, sleep mode | ICC(DIS) | 2 | 35 | µA | Device in sleep mode | 6 | |
| Power-On Time | tPO | 180 | 350 | µs | VCC ≥ VCC(min) | 6 | |
| Undervoltage Lockout Enable | VCC(UV)EN | 1.9 | 2.25 | V | Enable, valid during tAWAKE only; VCC ≥ VCC(min) → VCC < VCC(min) | 6 | |
| Undervoltage Lockout Release | VCC(UV)DIS | 2.5 | 3 | V | Release, valid during tAWAKE only; VCC < VCC(min) → VCC ≥ VCC(min) | 6 | |
| Micropower Period (-xxx Option) | tPERIOD | 160 | 220 | ms | 6 | ||
| Output Leakage Current (12 V) | IOUTOFF | 0.1 | µA | VOUT(OFF) = 12 V, TA = -40°C to 85°C, output off, VCC ≥ VCC(min), t > tPO | 7 | ||
| Output Leakage Current (24 V) | IOUTOFF | 1 | µA | VOUT(OFF) = 24 V, output off, VCC ≥ VCC(min), t > tPO | 7 | ||
| Output Leakage Current, Power-On | IOUTOFF(PO) | 95 | µA | VCC ≥ VCC(min), t < tPO | 7 | ||
| Output Saturation Voltage | VOUT(SAT) | 100 | 500 | mV | Output on, IOUT = 5 mA | 7 | |
| Output Off Voltage | VOUT(OFF) | 24 | V | VOUT ≤ VOUT(OFF)(max) | 7 | ||
| Output Rise Time | tr | 0.2 | 2 | µs | CL = 20 pF, RPULL-UP = 4.8 kΩ | 7 | |
| Output Fall Time | tf | 0.1 | 2 | µs | CL = 20 pF, RPULL-UP = 4.8 kΩ | 7 | |
| Output Short-Circuit Current Limit | IOM | 15 | 25 | 40 | mA | Output on, VPULL-UP ≤ 24 V | 7 |
| Output Zener Clamp Voltage | VZ(OUT) | 32 | V | IOUT = 1.5 mA, TA = 25°C | 7 | ||
| Supply Zener Clamp Voltage | VZ | 40 | V | ICC = ICC(max) + 3 mA, TA = 25°C | 7 | ||
| Reverse Battery Zener Clamp Voltage | VRZ | -18 | V | ICC = -5 mA, TA = 25°C | 7 | ||
| Reverse Battery Current | IRCC | -5 | mA | VCC = -18 V, TA = 25°C | 7 | ||
| Operate Point, South (-0Pxx) | BOPS | 10 | 40 | 70 | G | -0Pxx Option | 8 |
| Operate Point, North (-0Pxx) | BOPN | -70 | -40 | -10 | G | -0Pxx Option | 8 |
| Release Point, South (-0Pxx) | BRPS | 5 | 22.5 | 50 | G | -0Pxx Option | 8 |
| Release Point, North (-0Pxx) | BRPN | -50 | -22.5 | -5 | G | -0Pxx Option | 8 |
| Hysteresis (-0Pxx) | BHYS | 5 | 17.5 | 40 | G | -0Pxx Option | 8 |
| Supply Voltage (absolute maximum) | VCC | 40 | V | Does not apply to extremely short voltage transients | 4 | ||
| Reverse Supply Voltage | VRCC | -18 | V | 4 | |||
| Output Voltage | VOUT | -0.3 | 32 | V | Does not apply to extremely short voltage transients | 4 | |
| Output Current | IOUT | 40 | mA | Through short-circuit current limiting device | 4 | ||
| Reverse Output Current | IROUT | -50 | mA | 4 | |||
| Operating Ambient Temperature Range | TA | -40 | 150 | °C | Range L | 4 | |
| Maximum Junction Temperature | TJ(max) | 165 | °C | 4 | |||
| Storage Temperature | Tstg | -65 | 170 | °C | 4 | ||
| ESD Voltage (HBM) | VESD(HBM) | -11 | 11 | kV | Human Body Model according to AEC-Q100-002 | 4 | |
| Package Thermal Resistance, LH 1-layer PCB | RθJA | 228 | °C/W | Package LH, 1-layer PCB with copper limited to solder pads | 10 | ||
| Package Thermal Resistance, LH 2-layer PCB | RθJA | 110 | °C/W | Package LH, 2-layer PCB with 0.463 in.2 of copper area each side connected by thermal vias | 10 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | for through-hole mounting. Both packages are lead (Pb) free, with 100% matte-tin-plated leadframes. | 2 |
CAD (KiCad official)
- Symbol:
APS11760LLHALT-0PL - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23W (KiCad packages3D, STEP)
- 3D model files:
aps11760llhalt-0pl-etched.step/aps11760llhalt-0pl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);aps11760llhalt-0pl.step/aps11760llhalt-0pl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems LLC datasheet (24 pp, sha256
961254ea6ead66f9, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).