main
Ray aps11202llhalt: laser-etched CAD + chip hero (factory 2.0.0 backfill) e65001d 1mo ago

APS11202LLHALT

Allegro MicroSystems LLC · Linear Hall Sensors · SOT-23W

APS11202LLHALT from Allegro MicroSystems LLC, in a SOT-23W. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Power supply input. Operating range 3.0 to 24 V (absolute max 26.5 V). Reverse-battery protection to -20 V. A 0.1 uF bypass capacitor to GND close to the device is recommended.
2 OUT output Open-drain switch output, active low when south-polarity magnetic flux exceeds BOP (typ 35 G). Sinks up to 25 mA continuous with VOUT(SAT) typ 185 mV at 20 mA; internal current limit 30 to 60 mA. Requires an external pull-up resistor; output off voltage rated up to 26 V.
3 GND power_in Ground reference for the device.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems LLC
Package SOT-23W
Category Magnetic Sensors
Pins 3

Ordering variants

Same part, different packaging or reel option.

  • APS11202LLHALT
  • APS11202LLHALX
  • APS11202LLHALTLUAA

CAD (KiCad official)

  • Symbol: APS11202LLHALT
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23W (KiCad packages3D, STEP)
  • 3D model files: aps11202llhalt-etched.step / aps11202llhalt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); aps11202llhalt.step / aps11202llhalt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems LLC datasheet (None pp, sha256 f341856101da687c, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF