component
APL3553ABI-TRG
Public Made by Adomby adom
Anpec Elec Power Distribution Switches, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 20d ago |
| viewers | 20d ago |
| apl3553abi-trg-etched.glb | 20d ago |
| apl3553abi-trg-etched.step | 20d ago |
| apl3553abi-trg-hero.glb | 20d ago |
| apl3553abi-trg-hero.overlay.json | 20d ago |
| apl3553abi-trg.glb | 20d ago |
| apl3553abi-trg.kicad_mod | 20d ago |
| apl3553abi-trg.kicad_sym | 20d ago |
| apl3553abi-trg.lbr | 20d ago |
| apl3553abi-trg.step | 20d ago |
| package.json | 20d ago |
| page.json | 20d ago |
| README.md | 20d ago |
APL3553ABI-TRG
Anpec Elec · Power Distribution Switches · SOT-23-5
APL3553ABI-TRG from Anpec Elec, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Output voltage pin that follows the input voltage; when the device is disabled it is discharged through an internal resistor (150 Ω typ.), and the absolute maximum VOUT-to-GND rating is -0.3 to 7 V. |
| 2 | GND | power_in | Ground pin; the negative pins of the input and output capacitors and this GND pin must be connected to the load ground plane. |
| 3 | OCB | output | Open-drain fault indication output that goes low after a 12 ms deglitch time when a current-limit or over-temperature condition is detected, and requires an external pull-up resistor. |
| 4 | EN | input | Active-high enable input for the APL3553A variant: a high level (VIH min. 1.4 V) enables the device and a low level (VIL max. 0.6 V) disables it, and the pin cannot be left floating. |
| 5 | VIN | power_in | Power supply input connected to the external DC supply, with a recommended operating range of 2.7 V to 5.5 V and an absolute maximum of 7 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Anpec Elec |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
APL3553ABI-TRG - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
apl3553abi-trg-etched.step/apl3553abi-trg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);apl3553abi-trg.step/apl3553abi-trg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Anpec Elec datasheet (22 pp, sha256
01b0c0e23447c348, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).