AP8802SG-13

{
  "slug": "ap8802sg-13",
  "version": "0.1.0",
  "type": "component",
  "description": "Diodes Incorporated LED Drivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "display modules - led drivers - display drivers",
    "ap8802sg-13",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap8802sg-13.kicad_sym",
    "ap8802sg-13.kicad_mod",
    "ap8802sg-13.glb",
    "ap8802sg-13.step",
    "ap8802sg-13.lbr",
    "docs/hero.png",
    "docs/ap8802sg-13-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap8802sg-13-hero.glb",
    "ap8802sg-13-hero.overlay.json",
    "ap8802sg-13-etched.glb"
  ],
  "component": {
    "mpn": "AP8802SG-13",
    "manufacturer": "Diodes Incorporated",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Display Modules / LED Drivers / Display Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.diodes.com/assets/Datasheets/AP8802SG-13.pdf",
    "parts": {
      "symbol": "ap8802sg-13.kicad_sym",
      "footprint": "ap8802sg-13.kicad_mod",
      "model_3d": "ap8802sg-13-hero.glb",
      "model_3d_plain": "ap8802sg-13-etched.glb",
      "model_3d_step": "ap8802sg-13-etched.step",
      "model_3d_step_plain": "ap8802sg-13.step",
      "lbr": "ap8802sg-13.lbr"
    },
    "distributor_links": {
      "lcsc": "C2678627",
      "digikey": "AP8802SGDITR-ND",
      "mouser": "621-AP8802SG-13"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T00:31:24Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "AP8802SGDITR-ND",
        "status": "found",
        "lifecycle": "Discontinued at DigiKey"
      },
      "mouser": {
        "pn": "621-AP8802SG-13",
        "status": "found",
        "lifecycle": "End of Life"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SET",
        "type": "input",
        "description": "Sets the nominal output current through an external resistor RSET connected between VIN and SET, where the VIN-to-SET threshold is nominally 200 mV and the SET voltage is specified from +0.3 V to -5 V measured with respect to VIN."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, and all voltages are referenced to it; the dedicated GND pins must be connected to 0 V."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "4",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin with an operating input voltage of 8.0 V to 48.0 V relative to GND, which must be locally bypassed."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "output",
        "description": "Switch pin that connects the inductor and freewheeling diode, with an absolute maximum of -0.3 V to +50 V, and the track length at this pin should be minimized to reduce EMI."
      },
      {
        "number": "6",
        "name": "SW",
        "type": "output",
        "description": "Switch pin that connects the inductor and freewheeling diode, with an absolute maximum of -0.3 V to +50 V, and the track length at this pin should be minimized to reduce EMI."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin shown in the SO-8 top-view pin assignment diagram; it is not listed in the SO-8 column of the pin description table."
      },
      {
        "number": "8",
        "name": "CTRL",
        "type": "input",
        "description": "Dual-function dimming pin that must stay above 0.2 V to avoid standby shutdown, accepts a PWM signal (open-drain/collector) or an analog voltage between 0.3 V and 2.5 V, has an absolute maximum of -0.3 V to +6 V, and an input impedance of about 50 kΩ."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The SO-8 column of the pin description table (page 2) lists only pin 2 as GND and does not assign pi; Both pins 5 and 6 are labeled SW. The datasheet does not state a separate function for either pin, s"
        ],
        "pages_sent": 19,
        "cost_usd": 0.0696,
        "at": "2026-10-31T00:31:11"
      },
      "datasheet": {
        "url": "https://www.diodes.com/assets/Datasheets/AP8802SG-13.pdf",
        "pages": 19,
        "sha256": "55de3e7564a198d5",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ap8802sg-13.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap8802sg-13-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f4db48dd1e892140812e0614718aa6490d3fe22cb1c65ffc6bca317f9d8beffb",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "SO-8",
      "source_page": 16,
      "D": {
        "nom_mm": 4.9,
        "range_mm": [
          4.85,
          4.95
        ]
      },
      "E1": {
        "nom_mm": 3.9,
        "range_mm": [
          3.85,
          3.95
        ]
      },
      "E": {
        "nom_mm": 6.0,
        "range_mm": [
          5.9,
          6.1
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.75,
        "range_mm": [
          null,
          1.75
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ap8802sg-13.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}