# AP8012H

**Minos** · AC-DC Controllers And Regulators · DIP-8

AP8012H from Minos, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the controller; the datasheet gives no voltage limit for this pin. |
| 2 | GND | power_in | Ground reference pin for the controller; the datasheet gives no voltage limit for this pin. |
| 3 | COMP | input | Feedback input pin with an absolute maximum rating of -0.3 V to 6 V, a COMP shutdown threshold of 1.1 V to 1.3 V (1.2 V typical), and a typical input impedance of 1.0 kΩ. |
| 4 | VDD | power_in | Power supply pin with an absolute maximum rating of -0.3 V to 45 V, a normal operating range of 10 V to 35 V, and overvoltage protection at 36 V to 44 V (40 V typical). |
| 5 | DRAIN | output | Output pin connected to the switching transformer, rated for -0.3 V to 800 V at the DRAIN terminal (internal 800 V power MOSFET). |
| 6 | DRAIN | output | Output pin connected to the switching transformer, rated for -0.3 V to 800 V at the DRAIN terminal (internal 800 V power MOSFET). |
| 7 | DRAIN | output | Output pin connected to the switching transformer, rated for -0.3 V to 800 V at the DRAIN terminal (internal 800 V power MOSFET). |
| 8 | DRAIN | output | Output pin connected to the switching transformer, rated for -0.3 V to 800 V at the DRAIN terminal (internal 800 V power MOSFET). |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Minos |
| Package | DIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Drain-source breakdown voltage | VBVDSS | 800 |  |  | V | VGS=0V, ID=0.25mA | 4 |
| Supply voltage (absolute maximum) | VDD | -0.3 |  | 45 | V |  | 2 |
| COMP feedback voltage (absolute maximum) | VCOMP | -0.3 |  | 6 | V |  | 2 |
| DRAIN voltage (absolute maximum) | VDRAIN | -0.3 |  | 800 | V |  | 2 |
| Operating junction temperature range | TJ | -20 |  | 150 | ℃ |  | 3 |
| Storage temperature range | TSTG | -55 |  | 150 | ℃ |  | 3 |
| Operating supply voltage range | VDD | 10 |  | 35 | V |  | 3 |
| VDD start-up threshold voltage | VDD_ON | 13 | 15 | 17 | V |  | 3 |
| VDD undervoltage protection threshold | VDD_OFF | 7 | 8 | 9 | V |  | 3 |
| VDD overvoltage protection voltage | VDD_OVP | 36 | 40 | 44 | V |  | 3 |
| Operating current | IDD |  | 3.5 | 6 | mA | VDD = VDD_ON+1V; VCOMP=0.5V | 3 |
| Oscillator frequency | OSC | 38 | 43 | 48 | kHz |  | 3 |
| Frequency dither range | FD | -5 |  | 5 | kHz |  | 3 |
| Output current limit | IS | 500 | 600 | 700 | mA |  | 3 |
| COMP shutdown threshold voltage | VCOMP_SP | 1.1 | 1.2 | 1.3 | V |  | 3 |
| Maximum duty cycle | DMAX |  |  | 90 | % |  | 3 |
| Minimum duty cycle | DMIN | 5 |  |  | % |  | 3 |
| VDD restart voltage after protection | VDD_RST |  | 6 |  | V |  | 3 |
| VDD start-up charging current | IHV |  | 1.25 |  | mA | VAC=85V~265V | 3 |
| Start-up operating current | ISTART |  | 300 |  | μA | VDD = VDD_ON-1V | 3 |
| COMP input impedance | RCOMP |  | 1 |  | kΩ |  | 3 |
| Leading edge blanking time | TLEB |  | 400 |  | nS |  | 3 |
| Minimum on-time | Tonmin |  | 800 |  | nS |  | 3 |
| Thermal shutdown temperature | TSD |  | 150 |  | ℃ |  | 3 |
| Thermal shutdown hysteresis | TSD_DLY |  | 30 |  | ℃ |  | 3 |
| MOSFET on-resistance | Rdson |  | 10 |  | Ω | ID=1A | 4 |
| Thermal resistance (junction, as printed θJC) | θJC |  | 85 |  | ℃/W |  | 2 |
| ESD rating (human body model) |  |  | 2 |  | KV |  | 3 |

## CAD (KiCad official)

- Symbol: `AP8012H`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `ap8012h-etched.step` / `ap8012h-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap8012h.step` / `ap8012h.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Minos datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590221524834676736) (8 pp, sha256 `c023933934ce4fab`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ap8012h-datasheet.pdf)