AP7583AQ-50MP-13

{
  "slug": "ap7583aq-50mp-13",
  "version": "0.1.0",
  "type": "component",
  "description": "Diodes Incorporated Linear Voltage Regulators (LDO), MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management",
    "ap7583aq-50mp-13",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap7583aq-50mp-13.kicad_sym",
    "ap7583aq-50mp-13.kicad_mod",
    "ap7583aq-50mp-13.glb",
    "ap7583aq-50mp-13.step",
    "ap7583aq-50mp-13.lbr",
    "docs/hero.png",
    "docs/ap7583aq-50mp-13-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap7583aq-50mp-13-hero.glb",
    "ap7583aq-50mp-13-hero.overlay.json",
    "ap7583aq-50mp-13-etched.glb"
  ],
  "component": {
    "mpn": "AP7583AQ-50MP-13",
    "manufacturer": "Diodes Incorporated",
    "package": "MSOP-8-EP",
    "pin_count": 9,
    "category": "Power Management",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://www.diodes.com/assets/Datasheets/AP7583AQ-50MP-13.pdf",
    "parts": {
      "symbol": "ap7583aq-50mp-13.kicad_sym",
      "footprint": "ap7583aq-50mp-13.kicad_mod",
      "model_3d": "ap7583aq-50mp-13-hero.glb",
      "model_3d_plain": "ap7583aq-50mp-13-etched.glb",
      "model_3d_step": "ap7583aq-50mp-13-etched.step",
      "model_3d_step_plain": "ap7583aq-50mp-13.step",
      "lbr": "ap7583aq-50mp-13.lbr"
    },
    "distributor_links": {
      "lcsc": "C6125716",
      "digikey": "31-AP7583AQ-50MP-13TR-ND",
      "mouser": "621-AP7583AQ-50MP-13"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T12:13:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "31-AP7583AQ-50MP-13TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "621-AP7583AQ-50MP-13",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage pin, operating range 3.0V to 42V (absolute maximum 45V)."
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Active-high enable input; logic-low at most 0.3V turns the device off, logic-high at least 1.7V (up to VIN) turns it on, and it may be tied to VIN if unused."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally; connecting it to GND is recommended to maximize PCB copper for thermal dissipation."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "6",
        "name": "FB/NC",
        "type": "unconnected",
        "description": "Feedback pin used only on the adjustable version to set the output voltage through a resistor divider; this 5.0V fixed version has no feedback function, so it is treated as no-connect."
      },
      {
        "number": "7",
        "name": "PG",
        "type": "output",
        "description": "Power-good output with one internal pull-up resistor; it is driven low when VOUT is below the PG threshold and goes high-impedance when VOUT exceeds it."
      },
      {
        "number": "8",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulated output voltage, fixed at 5.0V for this version, with up to 300mA output current."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet labels pin 6 as FB/NC and describes it as adjustable-version only. Treating it as NC o; The table lists pin 3 as NC for both Q and AQ. Pin 7 is NC on AP7583Q and PG on AP7583AQ. The AQ ass; The exposed pad has no pin number in the datasheet, only the label EP. It is printed here as EP, not"
        ],
        "pages_sent": 21,
        "cost_usd": 0.1531,
        "at": "2026-10-23T12:13:32"
      },
      "datasheet": {
        "url": "https://www.diodes.com/assets/Datasheets/AP7583AQ-50MP-13.pdf",
        "pages": 21,
        "sha256": "236be72831d65721",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ap7583aq-50mp-13.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.96
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "43252be3beac8fd30ca9bfeb82a613fa01d5dffff9b22810c13a4655daafb5ee",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap7583aq-50mp-13-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.96
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e279c623d1e0ba9b3b4732a0eeecf8d94426edf732b449902fe01fe8f69e97e8",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}