component
AP7383-30WR-7
Public Made by Adomby adom
Diodes Incorporated Linear Voltage Regulators (LDO), SOT-25. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAP7383-30WR-7
Diodes Incorporated · Linear Voltage Regulators (LDO) · SOT-25
AP7383-30WR-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground connection for the regulator. |
| 2 | VIN | power_in | Input voltage pin; recommended supply range is 3.5 V to 30 V, with an absolute maximum of 33 V. |
| 3 | VOUT | power_out | Regulated output voltage pin (3.0 V fixed version for this part). |
| 4 | NC | unconnected | Not connected for the fixed version; not connected internally, and connection to GND is recommended to maximize PCB copper for thermal dissipation. |
| 5 | NC | unconnected | Not connected for the fixed version; not connected internally, and connection to GND is recommended to maximize PCB copper for thermal dissipation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 99 | 101 | % of VOUT | VIN = VOUT + 2V, IOUT = 10mA, Variation from Specified VOUT | 4 | |
| Input Voltage | VIN | 3.5 | 30 | V | 4 | ||
| Current Limit | ILIMIT | 150 | mA | VIN = VOUT + 2V, VOUT1 = 98% ×VOUT | 4 | ||
| Dropout Voltage 3.0V ≤ VOUT < 5.0V | VDROP | 360 | 580 | mV | IOUT = 50mA | 4 | |
| Dropout Voltage 3.0V ≤ VOUT < 5.0V | VDROP | 750 | 1000 | mV | IOUT = 100mA | 4 | |
| Dropout Voltage 3.0V ≤ VOUT < 5.0V | VDROP | 1050 | 1500 | mV | IOUT = 150mA | 4 | |
| Ground Current | IGND | 1.8 | 3 | µA | IOUT = 0A | 4 | |
| EN High Voltage | 2 | V | EN Input Voltage "High" | 4 | |||
| EN Low Voltage | 0.4 | V | EN Input Voltage "Low" | 4 | |||
| Supply Input Voltage | VIN | 3.5 | 30 | V | 3 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Supply Input Voltage | VIN | 33 | V | @ TA = +25°C | 3 | ||
| Enable Input Voltage | VEN | 33 | V | @ TA = +25°C | 3 | ||
| Output Current | IOUT | 200 | mA | @ TA = +25°C | 3 | ||
| Lead Temperature | TLEAD | 260 | °C | Soldering, 10s | 3 | ||
| Operating Junction Temperature | TJ | 150 | °C | @ TA = +25°C | 3 | ||
| Power Dissipation SOT25 (WR Package) | PD | 602 | mW | @ TA = +25°C | 3 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| ESD (Machine Model) | 250 | V | 3 | ||||
| ESD (Human Body Model) | 2500 | V | 3 | ||||
| Thermal Resistance Junction to Ambient SOT25 (WR Package) | θJA | 166 | °C/W | 3 | |||
| Thermal Resistance Junction to Case SOT25 (WR Package) | θJC | 26 | °C/W | 3 | |||
| Line Regulation | ΔVOUT/ΔVIN/VOUT | 0.05 | %/V | VOUT + 2V ≤ VIN ≤ 30V, IOUT = 10mA | 4 | ||
| Load Regulation | ΔVOUT/VOUT | 0.5 | % | VIN = VOUT + 2V, 1mA ≤ IOUT ≤ 150mA | 4 | ||
| Standby Current | ISTD | 0.01 | µA | VEN in OFF Mode | 4 | ||
| Output Voltage Temperature Coefficient | ΔVOUT/(VOUTxΔT) | 100 | ppm/°C | IOUT = 100µA, -40°C ≤ TJ ≤ +125°C | 4 | ||
| EN Pin Current | IEN | 1 | µA | 4 | |||
| Thermal Shutdown Temperature | TOTSD | 160 | °C | 4 | |||
| Thermal Shutdown Hysteresis | THYOTSD | 20 | °C | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | , ESD (Human Body Model) 2500 V Note: 4. a). Stresses beyond those listed under Absolute Maximum Ratings can cause permanent damage to the device. These are stress ratings only, and | 3 | |
| contacts | tin | • Terminals: ▪ SOT25/SOT89: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 12 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
AP7383-30WR-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25, generated on the KiCad land (body 1.6 x 2.8 mm, terminals on the pads, 1.1 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ap7383-30wr-7-etched.step/ap7383-30wr-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap7383-30wr-7.step/ap7383-30wr-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (13 pp, sha256
ba4342c8e55d91d5, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).