component
AP7363-15E-13
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AP7363-15E-13
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-3L
AP7363-15E-13 from Diodes Incorporated, in a SOT-223-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Voltage input pin, operating range 2.2V to 5.5V, with a minimum 2.2µF ceramic capacitor recommended to GND placed close to the device. |
| 2 | GND | power_in | Ground pin; the SOT223 tab is also labelled GND on the pin assignment diagram. |
| 3 | OUT | power_out | Fixed 1.5V regulated output pin (AP7363-15), up to 1.5A load current, stable with any 10µF-class output capacitor placed close to OUT and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-223-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Dropout Voltage, TA=+25°C | VDROPOUT | 190 | 240 | mV | IOUT = 1.5A, VOUT = 2.5V, TA = +25°C | 4 | |
| Dropout Voltage, over temp | VDROPOUT | 280 | mV | IOUT = 1.5A, VOUT = 2.5V, Over temp | 4 | ||
| Ground Pin Current, TA=+25°C | IGND | 1 | 1.2 | mA | IOUT = 10mA to 1.5A, TA = +25°C | 4 | |
| Ground Pin Current, over temp | IGND | 1.3 | mA | IOUT = 10mA to 1.5A, Over temp | 4 | ||
| Short Circuit Current, over temp | ISC | 2 | A | OUT Grounded, Over temp | 4 | ||
| Short Circuit Current, TA=+25°C | ISC | 3.7 | A | OUT Grounded, TA = +25°C | 4 | ||
| Input Voltage | VIN | 2.2 | 5.5 | V | 3 | ||
| Output Current | IOUT | 0 | 1.5 | A | 3 | ||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 3 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | Note 5 | 3 | |
| Input Voltage (absolute maximum) | VIN | -0.3 | 6 | V | TA = +25°C | 3 | |
| Storage Temperature Range | TST | -65 | 150 | °C | TA = +25°C | 3 | |
| Maximum Junction Temperature | TJ | 150 | °C | TA = +25°C | 3 | ||
| ESD HBM | ESD HBM | 2000 | V | Human Body Model ESD Protection | 3 | ||
| ESD MM | ESD MM | 200 | V | Machine Model ESD Protection | 3 | ||
| Thermal Resistance Junction-to-Ambient SOT223 | θJA | 105.7 | °C/W | SOT223 (Note 8) | 4 | ||
| Thermal Resistance Junction-to-Case SOT223 | θJC | 18.5 | °C/W | SOT223 (Note 8) | 4 | ||
| Line Regulation, TA=+25°C | ΔVOUT/ΔVIN | 0.04 | %/V | VIN = VIN-MIN to VIN-MAX, TA = +25°C | 4 | ||
| Load Regulation, TA=+25°C | ΔVOUT/ΔIOUT | 0.18 | %/A | IOUT = 10mA to 1.5A, TA = +25°C | 4 | ||
| Ripple Rejection 120Hz | PSRR | 65 | dB | VIN = 3.0V, IOUT = 1.5A, f = 120Hz | 4 | ||
| Ripple Rejection 1kHz | PSRR | 61 | dB | VIN = 3.0V, IOUT = 1.5A, f = 1kHz | 4 | ||
| Output Noise Voltage | en | 100 | µV(rms) | BW = 100Hz, 100kHz, COUT = 10μF Ceramic | 4 | ||
| Thermal Shutdown Threshold | TSHDN | 170 | °C | TJ Rising | 4 | ||
| Thermal Shutdown Hysteresis | THYS | 10 | °C | TJ Falling From TSHDN | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: SOT223/ SO-8EP/ TO252 : Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 14 |
CAD (KiCad official)
- Symbol:
AP7363-15E-13 - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223-3L (KiCad packages3D, STEP)
- 3D model files:
ap7363-15e-13-etched.step/ap7363-15e-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap7363-15e-13.step/ap7363-15e-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (15 pp, sha256
c3f2b50c3b32b490, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AP7363-15E-13
**Diodes Incorporated** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-3L
AP7363-15E-13 from Diodes Incorporated, in a SOT-223-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Voltage input pin, operating range 2.2V to 5.5V, with a minimum 2.2µF ceramic capacitor recommended to GND placed close to the device. |
| 2 | GND | power_in | Ground pin; the SOT223 tab is also labelled GND on the pin assignment diagram. |
| 3 | OUT | power_out | Fixed 1.5V regulated output pin (AP7363-15), up to 1.5A load current, stable with any 10µF-class output capacitor placed close to OUT and GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-223-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Dropout Voltage, TA=+25°C | VDROPOUT | | 190 | 240 | mV | IOUT = 1.5A, VOUT = 2.5V, TA = +25°C | 4 |
| Dropout Voltage, over temp | VDROPOUT | | | 280 | mV | IOUT = 1.5A, VOUT = 2.5V, Over temp | 4 |
| Ground Pin Current, TA=+25°C | IGND | | 1 | 1.2 | mA | IOUT = 10mA to 1.5A, TA = +25°C | 4 |
| Ground Pin Current, over temp | IGND | | | 1.3 | mA | IOUT = 10mA to 1.5A, Over temp | 4 |
| Short Circuit Current, over temp | ISC | 2 | | | A | OUT Grounded, Over temp | 4 |
| Short Circuit Current, TA=+25°C | ISC | | 3.7 | | A | OUT Grounded, TA = +25°C | 4 |
| Input Voltage | VIN | 2.2 | | 5.5 | V | | 3 |
| Output Current | IOUT | 0 | | 1.5 | A | | 3 |
| Operating Ambient Temperature | TA | -40 | | 85 | °C | | 3 |
| Operating Junction Temperature | TJ | -40 | | 125 | °C | Note 5 | 3 |
| Input Voltage (absolute maximum) | VIN | -0.3 | | 6 | V | TA = +25°C | 3 |
| Storage Temperature Range | TST | -65 | | 150 | °C | TA = +25°C | 3 |
| Maximum Junction Temperature | TJ | | | 150 | °C | TA = +25°C | 3 |
| ESD HBM | ESD HBM | | | 2000 | V | Human Body Model ESD Protection | 3 |
| ESD MM | ESD MM | | | 200 | V | Machine Model ESD Protection | 3 |
| Thermal Resistance Junction-to-Ambient SOT223 | θJA | | 105.7 | | °C/W | SOT223 (Note 8) | 4 |
| Thermal Resistance Junction-to-Case SOT223 | θJC | | 18.5 | | °C/W | SOT223 (Note 8) | 4 |
| Line Regulation, TA=+25°C | ΔVOUT/ΔVIN | | 0.04 | | %/V | VIN = VIN-MIN to VIN-MAX, TA = +25°C | 4 |
| Load Regulation, TA=+25°C | ΔVOUT/ΔIOUT | | 0.18 | | %/A | IOUT = 10mA to 1.5A, TA = +25°C | 4 |
| Ripple Rejection 120Hz | PSRR | | 65 | | dB | VIN = 3.0V, IOUT = 1.5A, f = 120Hz | 4 |
| Ripple Rejection 1kHz | PSRR | | 61 | | dB | VIN = 3.0V, IOUT = 1.5A, f = 1kHz | 4 |
| Output Noise Voltage | en | | 100 | | µV(rms) | BW = 100Hz, 100kHz, COUT = 10μF Ceramic | 4 |
| Thermal Shutdown Threshold | TSHDN | | 170 | | °C | TJ Rising | 4 |
| Thermal Shutdown Hysteresis | THYS | | 10 | | °C | TJ Falling From TSHDN | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: SOT223/ SO-8EP/ TO252 : Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 14 |
## CAD (KiCad official)
- Symbol: `AP7363-15E-13`
- Footprint: `Package_TO_SOT_SMD:SOT-223-3_TabPin2`
- 3D model: SOT-223-3L (KiCad packages3D, STEP)
- 3D model files: `ap7363-15e-13-etched.step` / `ap7363-15e-13-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap7363-15e-13.step` / `ap7363-15e-13.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/AP7363-15E-13.pdf) (15 pp, sha256 `c3f2b50c3b32b490`, retrieved 2026-10-23, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ap7363-15e-13-datasheet.pdf)