component
AP7363-12D-13
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-252. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AP7363-12D-13
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252
AP7363-12D-13 from Diodes Incorporated, in a TO-252. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Voltage input pin; the recommended input voltage range is 2.2V to 5.5V, with an absolute maximum input of -0.3V to +6.0V. |
| 2 | GND | power_in | Ground pin; the exposed tab is electrically connected to the die and is recommended to be connected externally to GND, but it should not be the only ground connection. |
| 3 | OUT | power_out | Regulated voltage output pin; the output current is limited to 1.5A (recommended maximum), and the OUT voltage absolute maximum is -0.3V to VIN +0.3V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TO-252 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| ESD HBM Human Body Model ESD Protection | ESD HBM | 2000 | V | 3 | |||
| ESD MM Machine Model ESD Protection | ESD MM | 200 | V | 3 | |||
| Input Voltage | VIN | -0.3 | 6 | V | 3 | ||
| OUT Voltage | VOUT | -0.3 | V | Maximum printed as VIN +0.3 V | 3 | ||
| Storage Temperature Range | TST | -65 | 150 | °C | 3 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Input Voltage | VIN | 2.2 | 5.5 | V | 3 | ||
| Output Current | IOUT | 0 | 1.5 | A | 3 | ||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 3 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | Note 5: must be derated per TA, PD and TJ-MAX | 3 | |
| Dropout Voltage | VDROPOUT | 190 | 240 | mV | IOUT = 1.5A, VOUT = 2.5V; TA = +25°C | 4 | |
| Dropout Voltage | VDROPOUT | 280 | mV | IOUT = 1.5A, VOUT = 2.5V; over temp | 4 | ||
| Ground Pin Current in Normal Operation Mode | IGND | 1 | 1.2 | mA | IOUT = 10mA to 1.5A; TA = +25°C | 4 | |
| Ground Pin Current in Normal Operation Mode | IGND | 1.3 | mA | IOUT = 10mA to 1.5A; over temp | 4 | ||
| Short Circuit Current | ISC | 3.7 | A | OUT Grounded; TA = +25°C | 4 | ||
| Short Circuit Current | ISC | 2 | A | OUT Grounded; over temp | 4 | ||
| Turn-Off Delay | td(off) | 25 | μs | From VEN < VIL to VOUT = OFF, IOUT = 1.5A | 4 | ||
| Turn-On Delay | td(on) | 25 | μs | From VEN > VIH to VOUT = ON, IOUT = 1.5A | 4 | ||
| Ripple Rejection | PSRR | 65 | dB | VIN = 3.0V, IOUT = 1.5A, f = 120Hz | 4 | ||
| Ripple Rejection | PSRR | 61 | dB | VIN = 3.0V, IOUT = 1.5A, f = 1kHz | 4 | ||
| Output Noise Density | n(l/f) | 1 | µV/Hz | F = 120Hz, COUT = 10μF Ceramic | 4 | ||
| Output Noise Voltage | en | 100 | µV(rms) | BW = 100Hz, 100kHz, COUT = 10μF Ceramic | 4 | ||
| Thermal Shutdown Threshold | TSHDN | 170 | °C | TJ Rising | 4 | ||
| Thermal Shutdown Hysteresis | THYS | 10 | °C | TJ Falling From TSHDN | 4 | ||
| Line Regulation | VOUT / VIN | 0.04 | %/V | VIN = VIN-MIN to VIN-MAX; TA = +25°C | 4 | ||
| Line Regulation | VOUT / VIN | 0.05 | %/V | VIN = VIN-MIN to VIN-MAX; over temp | 4 | ||
| Load Regulation | VOUT / IOUT | 0.18 | %/A | IOUT = 10mA to 1.5A; TA = +25°C | 4 | ||
| Load Regulation | VOUT / IOUT | 0.33 | %/A | IOUT = 10mA to 1.5A; over temp | 4 | ||
| Thermal Resistance Junction-to-Ambient (TO252) | ϴJA | 87.8 | °C/W | Note 8: device mounted on 2” × 2” FR-4 PCB, 2oz copper, minimum recommended pad layout | 4 | ||
| Thermal Resistance Junction-to-Case (TO252) | ϴJC | 17.3 | °C/W | Note 8: device mounted on 2” × 2” FR-4 PCB, 2oz copper, minimum recommended pad layout | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: SOT223/ SO-8EP/ TO252 : Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 14 |
CAD (KiCad official)
- Symbol:
AP7363-12D-13 - Footprint:
Package_TO_SOT_SMD:TO-252-2 - 3D model: TO-252 (KiCad packages3D, STEP)
- 3D model files:
ap7363-12d-13-etched.step/ap7363-12d-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap7363-12d-13.step/ap7363-12d-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (15 pp, sha256
c3f2b50c3b32b490, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AP7363-12D-13
**Diodes Incorporated** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-252
AP7363-12D-13 from Diodes Incorporated, in a TO-252. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Voltage input pin; the recommended input voltage range is 2.2V to 5.5V, with an absolute maximum input of -0.3V to +6.0V. |
| 2 | GND | power_in | Ground pin; the exposed tab is electrically connected to the die and is recommended to be connected externally to GND, but it should not be the only ground connection. |
| 3 | OUT | power_out | Regulated voltage output pin; the output current is limited to 1.5A (recommended maximum), and the OUT voltage absolute maximum is -0.3V to VIN +0.3V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TO-252 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| ESD HBM Human Body Model ESD Protection | ESD HBM | | | 2000 | V | | 3 |
| ESD MM Machine Model ESD Protection | ESD MM | | | 200 | V | | 3 |
| Input Voltage | VIN | -0.3 | | 6 | V | | 3 |
| OUT Voltage | VOUT | -0.3 | | | V | Maximum printed as VIN +0.3 V | 3 |
| Storage Temperature Range | TST | -65 | | 150 | °C | | 3 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 3 |
| Input Voltage | VIN | 2.2 | | 5.5 | V | | 3 |
| Output Current | IOUT | 0 | | 1.5 | A | | 3 |
| Operating Ambient Temperature | TA | -40 | | 85 | °C | | 3 |
| Operating Junction Temperature | TJ | -40 | | 125 | °C | Note 5: must be derated per TA, PD and TJ-MAX | 3 |
| Dropout Voltage | VDROPOUT | | 190 | 240 | mV | IOUT = 1.5A, VOUT = 2.5V; TA = +25°C | 4 |
| Dropout Voltage | VDROPOUT | | | 280 | mV | IOUT = 1.5A, VOUT = 2.5V; over temp | 4 |
| Ground Pin Current in Normal Operation Mode | IGND | | 1 | 1.2 | mA | IOUT = 10mA to 1.5A; TA = +25°C | 4 |
| Ground Pin Current in Normal Operation Mode | IGND | | | 1.3 | mA | IOUT = 10mA to 1.5A; over temp | 4 |
| Short Circuit Current | ISC | | 3.7 | | A | OUT Grounded; TA = +25°C | 4 |
| Short Circuit Current | ISC | 2 | | | A | OUT Grounded; over temp | 4 |
| Turn-Off Delay | td(off) | | 25 | | μs | From VEN < VIL to VOUT = OFF, IOUT = 1.5A | 4 |
| Turn-On Delay | td(on) | | 25 | | μs | From VEN > VIH to VOUT = ON, IOUT = 1.5A | 4 |
| Ripple Rejection | PSRR | | 65 | | dB | VIN = 3.0V, IOUT = 1.5A, f = 120Hz | 4 |
| Ripple Rejection | PSRR | | 61 | | dB | VIN = 3.0V, IOUT = 1.5A, f = 1kHz | 4 |
| Output Noise Density | n(l/f) | | 1 | | µV/Hz | F = 120Hz, COUT = 10μF Ceramic | 4 |
| Output Noise Voltage | en | | 100 | | µV(rms) | BW = 100Hz, 100kHz, COUT = 10μF Ceramic | 4 |
| Thermal Shutdown Threshold | TSHDN | | 170 | | °C | TJ Rising | 4 |
| Thermal Shutdown Hysteresis | THYS | | 10 | | °C | TJ Falling From TSHDN | 4 |
| Line Regulation | VOUT / VIN | | 0.04 | | %/V | VIN = VIN-MIN to VIN-MAX; TA = +25°C | 4 |
| Line Regulation | VOUT / VIN | | 0.05 | | %/V | VIN = VIN-MIN to VIN-MAX; over temp | 4 |
| Load Regulation | VOUT / IOUT | | 0.18 | | %/A | IOUT = 10mA to 1.5A; TA = +25°C | 4 |
| Load Regulation | VOUT / IOUT | | 0.33 | | %/A | IOUT = 10mA to 1.5A; over temp | 4 |
| Thermal Resistance Junction-to-Ambient (TO252) | ϴJA | | 87.8 | | °C/W | Note 8: device mounted on 2” × 2” FR-4 PCB, 2oz copper, minimum recommended pad layout | 4 |
| Thermal Resistance Junction-to-Case (TO252) | ϴJC | | 17.3 | | °C/W | Note 8: device mounted on 2” × 2” FR-4 PCB, 2oz copper, minimum recommended pad layout | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: SOT223/ SO-8EP/ TO252 : Finish - Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 | 14 |
## CAD (KiCad official)
- Symbol: `AP7363-12D-13`
- Footprint: `Package_TO_SOT_SMD:TO-252-2`
- 3D model: TO-252 (KiCad packages3D, STEP)
- 3D model files: `ap7363-12d-13-etched.step` / `ap7363-12d-13-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap7363-12d-13.step` / `ap7363-12d-13.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/AP7363-12D-13.pdf) (15 pp, sha256 `c3f2b50c3b32b490`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ap7363-12d-13-datasheet.pdf)