component
AP7361-12ER-13
Public Made by Adomby adom
Diodes Incorporated Linear Voltage Regulators (LDO), SOT-223R. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAP7361-12ER-13
Diodes Incorporated · Linear Voltage Regulators (LDO) · SOT-223R
AP7361-12ER-13 from Diodes Incorporated, in a SOT-223R. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the regulator; the datasheet gives no further limits for this pin. |
| 2 | OUT | power_out | The output of the regulator; bypass to ground with at least 2.2µF ceramic capacitor, and a larger capacitor is recommended for improved AC load response. |
| 3 | IN | power_in | The input of the regulator; bypass to ground with at least 1µF ceramic capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-223R |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | VOUT | -1 | 1 | % | IOUT = 100mA, TA = +25°C | 5 | |
| Output Voltage Accuracy | VOUT | -2 | 2 | % | IOUT = 100mA, -40°C ≤ TA ≤ +85°C | 5 | |
| Output Voltage Accuracy | VOUT | -3 | 0.5 | 3 | % | Over VIN, IOUT, and TA | 5 |
| Input Quiescent Current | IQ | 70 | 90 | µA | Enabled, IOUT = 0A | 5 | |
| Input Shutdown Current | ISHDN | -1 | 0.05 | 1 | µA | VEN = 0V, IOUT = 0A | 5 |
| ADJ Pin Leakage | IADJ | 0.1 | 0.5 | µA | 5 | ||
| Line Regulation | ΔVOUT/ΔVIN | 0.01 | 0.1 | %/V | VIN = VOUT +1V to 6V, IOUT = 100mA, TA = +25°C | 5 | |
| Line Regulation | ΔVOUT/ΔVIN | 0.2 | %/V | VIN = VOUT +1V to 6V, IOUT = 100mA, -40°C ≤ TA ≤ +85°C | 5 | ||
| Load Regulation | ΔVOUT/VOUT | -1 | 0.5 | 1 | % | IOUT from 1mA to 300mA | 5 |
| Dropout Voltage | VDROPOUT | 150 | 200 | mV | IOUT = 300mA | 5 | |
| Dropout Voltage | VDROPOUT | 250 | 350 | mV | IOUT = 500mA | 5 | |
| Dropout Voltage | VDROPOUT | 500 | 700 | mV | IOUT = 1A | 5 | |
| EN Input Logic Low Voltage | VIL | 0 | 0.3 | V | 5 | ||
| EN Input Logic High Voltage | VIH | 1 | V | Max printed as VIN | 5 | ||
| EN Input Leakage | IEN | -0.1 | 0.01 | 0.1 | µA | VIN = 6V, VEN = 0V or 6V | 5 |
| Current Limit | ILIMIT | 1.1 | 1.5 | A | VIN = VOUT +1V | 5 | |
| Input Voltage | VIN | 2.2 | 6 | V | 4 | ||
| Output Current | IOUT | 0 | 1 | A | 4 | ||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 4 | ||
| Input Voltage | VIN | 6.5 | V | TA = +25°C | 4 | ||
| OUT, ADJ, EN Voltage | 0.3 | V | Printed as VIN +0.3 V | 4 | |||
| Operating Junction Temperature Range | TJ | -40 | 150 | °C | TA = +25°C | 4 | |
| Storage Temperature Range | TST | -65 | 150 | °C | 4 | ||
| Power Dissipation SOT223 | PD | 1100 | mW | SOT223, ratings apply to ambient temperature at +25°C | 4 | ||
| ESD HBM | ESD HBM | 2 | KV | Human Body Model, printed as > 2 KV | 4 | ||
| ESD MM | ESD MM | 200 | V | Machine Model, printed as > 200 V; 150V for EN pin | 4 | ||
| Short-Circuit Current | ISHORT | 200 | mA | VIN = VOUT +1V, Output Voltage < 15% VOUT | 5 | ||
| PSRR | PSRR | 60 | 65 | dB | f = 1KHz, IOUT = 100mA | 5 | |
| PSRR | PSRR | 45 | dB | f = 10KHz, IOUT = 100mA | 5 | ||
| Start-Up Time | tST | 200 | µs | VOUT = 3V, COUT = 1µF, RL = 30Ω | 5 | ||
| Output Voltage Temperature Coefficient | ΔVOUT/ΔTA | 130 | ppm/°C | IOUT = 100mA, -40°C ≤ TA ≤ +85°C, printed as ±130 | 5 | ||
| FB Reference Voltage | VREF | 0.8 | V | IOUT = 10mA, TA = +25°C | 5 | ||
| Thermal Shutdown Threshold | TSHDN | 150 | °C | 5 | |||
| Thermal Shutdown Hysteresis | THYS | 20 | °C | 5 | |||
| Thermal Resistance Junction-to-Ambient SOT223 | θJA | 110 | °C/W | SOT223 (Note 9) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | reduce noise. For PCB layout, a wide copper trace is required for both IN and GND pins. A lower ESR capacitor type allows the use of less | 12 |
CAD (KiCad official)
- Symbol:
AP7361-12ER-13 - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223R (KiCad packages3D, STEP)
- 3D model files:
ap7361-12er-13-etched.step/ap7361-12er-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap7361-12er-13.step/ap7361-12er-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (22 pp, sha256
fd84e397b31647d7, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).