AP7361-10ER-13

{
 "schema": "adom.pads/1",
 "slug": "ap7361-10er-13",
 "footprint": "SOT-223-5",
 "generated_from": {
  "footprint": "SOT-223-5@sha256:a1d687e584eb3b46",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -3.05,
   -2.25
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-223-5@sha256:a1d687e584eb3b46"
 },
 "pad_count": 5,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.05,
    -2.25
   ],
   "rot": 0.0,
   "size": [
    2.2,
    1.0
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "EN",
   "type": "input",
   "description": "Enable input, active high. Device is turned on when EN is at logic high (VIH >= 1.0V); logic low (<= 0.3V) disables the regulator. Do not float. EN input leakage ±0.1µA typ.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-223-5.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.05,
    -0.75
   ],
   "rot": 0.0,
   "size": [
    2.2,
    1.0
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "GND",
   "type": "power_in",
   "description": "Ground reference for the regulator. Also serves as the thermal path for the SOT89-5 tab.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-223-5.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.05,
    0.75
   ],
   "rot": 0.0,
   "size": [
    2.2,
    1.0
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "ADJ/NC",
   "type": "unconnected",
   "description": "On the adjustable variant this is the ADJ feedback pin (resistor divider from OUT to ADJ sets Vout, VREF = 0.8V). On the fixed 1.0V variant (-10E) this pin has no internal connection and should be left open.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-223-5.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -3.05,
    2.25
   ],
   "rot": 0.0,
   "size": [
    2.2,
    1.0
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "IN",
   "type": "power_in",
   "description": "Regulator input supply, 2.2V to 6.0V recommended (6.5V absolute max). Bypass to GND with at least 1µF ceramic capacitor placed close to the pin.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-223-5.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    3.25,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.8,
    3.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "OUT",
   "type": "power_out",
   "description": "Regulated output, 1.0V nominal for the -10 option, up to 1A. Bypass to GND with at least 2.2µF ceramic capacitor (4.7µF recommended for improved AC load response).",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-223-5.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}