component
AP7343DQ-33W5-7
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AP7343DQ-33W5-7
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25
AP7343DQ-33W5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin; the datasheet gives a recommended input voltage of 1.7 V to 5.25 V, with an absolute maximum input voltage of 6.0 V. |
| 2 | GND | power_in | Ground pin; the datasheet says the regulator ground pin should be connected to the external circuit ground to reduce voltage drop from trace impedance. |
| 3 | EN | input | Enable input that must be driven high or low and must not float; high (at least 1.3 V) enables the regulator, low (at most 0.5 V) puts it in shutdown, and the absolute maximum EN voltage is 6.0 V. |
| 4 | NC | unconnected | No connect pin, not connected internally; the datasheet recommends connecting it to GND to maximize PCB copper for thermal dissipation. |
| 5 | VOUT | power_out | Regulated power output pin; the device is rated for a guaranteed output current of 300 mA, and the -33 suffix denotes a 3.3 V fixed output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | 1.7 | 5.25 | V | TA = -40°C to +85°C | 3 | ||
| Line Regulation | dVOUT/dVIN/VOUT | 0.02 | 0.1 | %/V | VIN = (VOUT, Nom + 1.0V) to 5.25V, IOUT = 1.0mA | 3 | |
| Load Regulation | 15 | 30 | mV | VIN = VOUT, Nom + 1.0V, IOUT = 1mA to 300mA | 3 | ||
| Quiescent Current | 35 | 60 | µA | IOUT = 0mA | 3 | ||
| Standby Current | ISTANDBY | 0.01 | 1 | µA | VEN = 0V (Disabled) | 3 | |
| Dropout Voltage | 0.22 | 0.31 | V | IOUT = 300mA (SOT25); 3.0V < VOUT ≤ 3.6V | 3 | ||
| Output Voltage Temperature Coefficient | -30 | 30 | ppm/°C | IOUT = 30mA, TA = -40°C to +125°C | 3 | ||
| Thermal Shutdown Threshold | TSHDN | 150 | °C | 3 | |||
| Thermal Shutdown Hysteresis | THYS | 20 | °C | 3 | |||
| EN Input Low Voltage | 0 | 0.5 | V | 3 | |||
| EN Input High Voltage | 1.3 | 5.25 | V | 3 | |||
| EN Input Leakage | -1 | 1 | µA | VEN = 0V, VIN = 5.0V or VEN = 5.0V, VIN = 0V | 3 | ||
| Input Voltage (recommended operating) | VIN | 1.7 | 5.25 | V | 3 | ||
| Output Current (recommended operating) | IOUT | 0 | 300 | mA | 3 | ||
| Operating Junction Temperature (recommended operating) | TJ | -40 | 125 | °C | 3 | ||
| Operating Ambient Temperature (recommended operating) | TA | -40 | 125 | °C | 3 | ||
| ESD HBM (Human Body Model) | ESD HBM | 2 | kV | 2 | |||
| ESD CDM (Charge Device Model) | ESD CDM | -500 | 500 | V | 2 | ||
| Input Voltage (absolute maximum) | VIN | 6 | V | 2 | |||
| EN Pin Input Voltage (absolute maximum) | VEN | 6 | V | 2 | |||
| Output Voltage (absolute maximum) | VOUT | -0.3 | V | 2 | |||
| Output Current (absolute maximum) | IOUT | 400 | mA | 2 | |||
| Power Dissipation SOT25 | PD | 698 | mW | 2 | |||
| Operating Junction Temperature (absolute maximum) | TJ | -40 | 150 | °C | 2 | ||
| Storage Temperature | TSTG | -55 | 150 | °C | 2 | ||
| Thermal Resistance Junction to Ambient (SOT25) | JA | 179 | °C/W | 3 | |||
| Thermal Resistance Junction to Case (SOT25) | JC | 52 | °C/W | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | capacitor is recommended between VIN and GND pins to decouple input power supply glitch. This input capacitor must be located as close as possible to the device to ensure input stability and reduce no | 11 |
CAD (KiCad official)
- Symbol:
AP7343DQ-33W5-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
ap7343dq-33w5-7-etched.step/ap7343dq-33w5-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap7343dq-33w5-7.step/ap7343dq-33w5-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (20 pp, sha256
8dfa94f851e27f03, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AP7343DQ-33W5-7
**Diodes Incorporated** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25
AP7343DQ-33W5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin; the datasheet gives a recommended input voltage of 1.7 V to 5.25 V, with an absolute maximum input voltage of 6.0 V. |
| 2 | GND | power_in | Ground pin; the datasheet says the regulator ground pin should be connected to the external circuit ground to reduce voltage drop from trace impedance. |
| 3 | EN | input | Enable input that must be driven high or low and must not float; high (at least 1.3 V) enables the regulator, low (at most 0.5 V) puts it in shutdown, and the absolute maximum EN voltage is 6.0 V. |
| 4 | NC | unconnected | No connect pin, not connected internally; the datasheet recommends connecting it to GND to maximize PCB copper for thermal dissipation. |
| 5 | VOUT | power_out | Regulated power output pin; the device is rated for a guaranteed output current of 300 mA, and the -33 suffix denotes a 3.3 V fixed output. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | | 1.7 | | 5.25 | V | TA = -40°C to +85°C | 3 |
| Line Regulation | dVOUT/dVIN/VOUT | | 0.02 | 0.1 | %/V | VIN = (VOUT, Nom + 1.0V) to 5.25V, IOUT = 1.0mA | 3 |
| Load Regulation | | | 15 | 30 | mV | VIN = VOUT, Nom + 1.0V, IOUT = 1mA to 300mA | 3 |
| Quiescent Current | | | 35 | 60 | µA | IOUT = 0mA | 3 |
| Standby Current | ISTANDBY | | 0.01 | 1 | µA | VEN = 0V (Disabled) | 3 |
| Dropout Voltage | | | 0.22 | 0.31 | V | IOUT = 300mA (SOT25); 3.0V < VOUT ≤ 3.6V | 3 |
| Output Voltage Temperature Coefficient | | -30 | | 30 | ppm/°C | IOUT = 30mA, TA = -40°C to +125°C | 3 |
| Thermal Shutdown Threshold | TSHDN | | | 150 | °C | | 3 |
| Thermal Shutdown Hysteresis | THYS | | | 20 | °C | | 3 |
| EN Input Low Voltage | | | 0 | 0.5 | V | | 3 |
| EN Input High Voltage | | 1.3 | | 5.25 | V | | 3 |
| EN Input Leakage | | -1 | | 1 | µA | VEN = 0V, VIN = 5.0V or VEN = 5.0V, VIN = 0V | 3 |
| Input Voltage (recommended operating) | VIN | 1.7 | | 5.25 | V | | 3 |
| Output Current (recommended operating) | IOUT | 0 | | 300 | mA | | 3 |
| Operating Junction Temperature (recommended operating) | TJ | -40 | | 125 | °C | | 3 |
| Operating Ambient Temperature (recommended operating) | TA | -40 | | 125 | °C | | 3 |
| ESD HBM (Human Body Model) | ESD HBM | 2 | | | kV | | 2 |
| ESD CDM (Charge Device Model) | ESD CDM | -500 | | 500 | V | | 2 |
| Input Voltage (absolute maximum) | VIN | | | 6 | V | | 2 |
| EN Pin Input Voltage (absolute maximum) | VEN | | | 6 | V | | 2 |
| Output Voltage (absolute maximum) | VOUT | -0.3 | | | V | | 2 |
| Output Current (absolute maximum) | IOUT | | | 400 | mA | | 2 |
| Power Dissipation SOT25 | PD | | | 698 | mW | | 2 |
| Operating Junction Temperature (absolute maximum) | TJ | -40 | | 150 | °C | | 2 |
| Storage Temperature | TSTG | -55 | | 150 | °C | | 2 |
| Thermal Resistance Junction to Ambient (SOT25) | JA | | 179 | | °C/W | | 3 |
| Thermal Resistance Junction to Case (SOT25) | JC | | 52 | | °C/W | | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | capacitor is recommended between VIN and GND pins to decouple input power supply glitch. This input capacitor must be located as close as possible to the device to ensure input stability and reduce no | 11 |
## CAD (KiCad official)
- Symbol: `AP7343DQ-33W5-7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files: `ap7343dq-33w5-7-etched.step` / `ap7343dq-33w5-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap7343dq-33w5-7.step` / `ap7343dq-33w5-7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560095105018322944) (20 pp, sha256 `8dfa94f851e27f03`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ap7343dq-33w5-7-datasheet.pdf)