component
AP7343D-33W5-7
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AP7343D-33W5-7
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25
AP7343D-33W5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin; the recommended input voltage range is 1.7V to 5.25V (absolute maximum 6.0V), and a minimum 0.47µF ceramic capacitor should be placed between VIN and GND. |
| 2 | GND | power_in | Ground pin, which should be connected to the external circuit ground with a wide copper trace to reduce trace-impedance voltage drop. |
| 3 | EN | input | Enable pin that must be driven high or low and must not float: high (1.3V to 5.25V) turns the regulator on and low (0V to 0.5V) puts it in shutdown, with an absolute maximum of 6.0V. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated power output with fixed output voltage (0.9V to 3.6V; this AP7343D-33 is the 3.3V option) and a guaranteed output current of 300mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | 1.7 | 5.25 | V | TA = -40°C to +85°C | 4 | ||
| Output Voltage Accuracy (VOUT(T) >= 2.0V, TA = +25°C; min/max are multipliers of VOUT(T) as printed) | VOUT(T) | 0.99 | 1.01 | x VOUT(T) | VOUT(T) >= 2.0V, VIN = VOUT(T)+1V, TA = +25°C | 4 | |
| Line Regulation | dVOUT/dVIN/VOUT | 0.02 | 0.1 | %/V | VIN = (VOUT, Nom +1.0V) to 5.25V, IOUT = 1.0mA | 4 | |
| Load Regulation | 15 | 30 | mV | VIN = VOUT - Nom +1.0V, IOUT = 1mA to 300mA | 4 | ||
| Quiescent Current (Note 6) | 35 | 60 | µA | IOUT = 0mA | 4 | ||
| ISTANDBY | ISTANDBY | 0.01 | 1 | µA | VEN = 0V (Disabled) | 4 | |
| Output Current | 300 | mA | 4 | ||||
| Fold-back Short Current (Note 7) | 55 | mA | VOUT Short to Ground | 4 | |||
| PSRR (Note 8) | PSRR | 75 | dB | VIN = (VOUT+1V) VDC + 0.2Vp-pAC, VOUT ≥ 1.8V, IOUT = 30mA, f = 1kHz | 4 | ||
| Output Noise Voltage (Note 8)(Note 9) | 60 | µVrms | BW = 10Hz to 100kHz, IOUT = 30mA | 4 | |||
| Dropout Voltage (Note 5), SOT25 | 0.22 | 0.31 | V | IOUT = 300mA (SOT25), 3.0V < VOUT ≤ 3.6V | 4 | ||
| Output Voltage Temperature Coefficient | -30 | 30 | ppm/°C | IOUT = 30mA, TA = -40°C to +85°C (printed ±30 ppm/°C, typical) | 4 | ||
| Thermal Shutdown Threshold (TSHDN) | TSHDN | 150 | °C | 4 | |||
| Thermal Shutdown Hysteresis (THYS) | THYS | 20 | °C | 4 | |||
| EN Input Low Voltage | 0 | 0.5 | V | 4 | |||
| EN Input High Voltage | 1.3 | 5.25 | V | 4 | |||
| EN Input Leakage | -1 | 1 | µA | VEN = 0, VIN = 5.0V or VEN = 5.0V, VIN = 0V | 4 | ||
| On Resistance of N-Channel for Auto-Discharge (Note 10) | 30 | Ω | VIN = 4.0V, VEN = 0V (Disabled) | 4 | |||
| Input Voltage (Recommended Operating Conditions) | VIN | 1.7 | 5.25 | V | 3 | ||
| Output Current (Recommended Operating Conditions) | IOUT | 0 | 300 | mA | 3 | ||
| Operating Junction Temperature (Recommended) | TJ | -40 | 125 | °C | 3 | ||
| Operating Ambient Temperature (Recommended) | TA | -40 | 85 | °C | 3 | ||
| ESD HBM Human Body Model ESD Protection | ESD HBM | 2 | kV | Printed as >2 kV | 3 | ||
| ESD MM Machine Model ESD Protection | ESD MM | 200 | V | Printed as >200 V | 3 | ||
| Input Voltage (Absolute Maximum) | VIN | 6 | V | 3 | |||
| Input Voltage for EN Pin (Absolute Maximum) | VEN | 6 | V | 3 | |||
| Output Voltage (Absolute Maximum) | VOUT | -0.3 | V | Upper limit printed as VIN +0.3 V | 3 | ||
| Output Current (Absolute Maximum) | IOUT | 400 | mA | 3 | |||
| Power Dissipation | PD | 400 | mW | 3 | |||
| Operating Ambient Temperature (Absolute Maximum) | TA | -40 | 85 | °C | 3 | ||
| Operating Junction Temperature (Absolute Maximum) | TJ | 125 | °C | 3 | |||
| Storage Temperature | TSTG | -55 | 125 | °C | 3 | ||
| Thermal Resistance Junction to Ambient, SOT25 | θJA | 179 | °C/W | SOT25 | 4 | ||
| Thermal Resistance Junction to Case, SOT25 | θJC | 52 | °C/W | SOT25 | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | capacitor is recommended between VIN and GND pins to decouple input power supply glitch. This input capacitor must be located as close as possible to the device to assure input stability and reduce no | 12 |
CAD (KiCad official)
- Symbol:
AP7343D-33W5-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
ap7343d-33w5-7-etched.step/ap7343d-33w5-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap7343d-33w5-7.step/ap7343d-33w5-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (20 pp, sha256
34e6b63381da732c, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AP7343D-33W5-7
**Diodes Incorporated** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25
AP7343D-33W5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin; the recommended input voltage range is 1.7V to 5.25V (absolute maximum 6.0V), and a minimum 0.47µF ceramic capacitor should be placed between VIN and GND. |
| 2 | GND | power_in | Ground pin, which should be connected to the external circuit ground with a wide copper trace to reduce trace-impedance voltage drop. |
| 3 | EN | input | Enable pin that must be driven high or low and must not float: high (1.3V to 5.25V) turns the regulator on and low (0V to 0.5V) puts it in shutdown, with an absolute maximum of 6.0V. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated power output with fixed output voltage (0.9V to 3.6V; this AP7343D-33 is the 3.3V option) and a guaranteed output current of 300mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | | 1.7 | | 5.25 | V | TA = -40°C to +85°C | 4 |
| Output Voltage Accuracy (VOUT(T) >= 2.0V, TA = +25°C; min/max are multipliers of VOUT(T) as printed) | VOUT(T) | 0.99 | | 1.01 | x VOUT(T) | VOUT(T) >= 2.0V, VIN = VOUT(T)+1V, TA = +25°C | 4 |
| Line Regulation | dVOUT/dVIN/VOUT | | 0.02 | 0.1 | %/V | VIN = (VOUT, Nom +1.0V) to 5.25V, IOUT = 1.0mA | 4 |
| Load Regulation | | | 15 | 30 | mV | VIN = VOUT - Nom +1.0V, IOUT = 1mA to 300mA | 4 |
| Quiescent Current (Note 6) | | | 35 | 60 | µA | IOUT = 0mA | 4 |
| ISTANDBY | ISTANDBY | | 0.01 | 1 | µA | VEN = 0V (Disabled) | 4 |
| Output Current | | 300 | | | mA | | 4 |
| Fold-back Short Current (Note 7) | | | 55 | | mA | VOUT Short to Ground | 4 |
| PSRR (Note 8) | PSRR | | 75 | | dB | VIN = (VOUT+1V) VDC + 0.2Vp-pAC, VOUT ≥ 1.8V, IOUT = 30mA, f = 1kHz | 4 |
| Output Noise Voltage (Note 8)(Note 9) | | | 60 | | µVrms | BW = 10Hz to 100kHz, IOUT = 30mA | 4 |
| Dropout Voltage (Note 5), SOT25 | | | 0.22 | 0.31 | V | IOUT = 300mA (SOT25), 3.0V < VOUT ≤ 3.6V | 4 |
| Output Voltage Temperature Coefficient | | -30 | | 30 | ppm/°C | IOUT = 30mA, TA = -40°C to +85°C (printed ±30 ppm/°C, typical) | 4 |
| Thermal Shutdown Threshold (TSHDN) | TSHDN | | | 150 | °C | | 4 |
| Thermal Shutdown Hysteresis (THYS) | THYS | | | 20 | °C | | 4 |
| EN Input Low Voltage | | 0 | | 0.5 | V | | 4 |
| EN Input High Voltage | | 1.3 | | 5.25 | V | | 4 |
| EN Input Leakage | | -1 | | 1 | µA | VEN = 0, VIN = 5.0V or VEN = 5.0V, VIN = 0V | 4 |
| On Resistance of N-Channel for Auto-Discharge (Note 10) | | | 30 | | Ω | VIN = 4.0V, VEN = 0V (Disabled) | 4 |
| Input Voltage (Recommended Operating Conditions) | VIN | 1.7 | | 5.25 | V | | 3 |
| Output Current (Recommended Operating Conditions) | IOUT | 0 | | 300 | mA | | 3 |
| Operating Junction Temperature (Recommended) | TJ | -40 | | 125 | °C | | 3 |
| Operating Ambient Temperature (Recommended) | TA | -40 | | 85 | °C | | 3 |
| ESD HBM Human Body Model ESD Protection | ESD HBM | 2 | | | kV | Printed as >2 kV | 3 |
| ESD MM Machine Model ESD Protection | ESD MM | 200 | | | V | Printed as >200 V | 3 |
| Input Voltage (Absolute Maximum) | VIN | | | 6 | V | | 3 |
| Input Voltage for EN Pin (Absolute Maximum) | VEN | | | 6 | V | | 3 |
| Output Voltage (Absolute Maximum) | VOUT | -0.3 | | | V | Upper limit printed as VIN +0.3 V | 3 |
| Output Current (Absolute Maximum) | IOUT | | | 400 | mA | | 3 |
| Power Dissipation | PD | | | 400 | mW | | 3 |
| Operating Ambient Temperature (Absolute Maximum) | TA | -40 | | 85 | °C | | 3 |
| Operating Junction Temperature (Absolute Maximum) | TJ | | | 125 | °C | | 3 |
| Storage Temperature | TSTG | -55 | | 125 | °C | | 3 |
| Thermal Resistance Junction to Ambient, SOT25 | θJA | | 179 | | °C/W | SOT25 | 4 |
| Thermal Resistance Junction to Case, SOT25 | θJC | | 52 | | °C/W | SOT25 | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | capacitor is recommended between VIN and GND pins to decouple input power supply glitch. This input capacitor must be located as close as possible to the device to assure input stability and reduce no | 12 |
## CAD (KiCad official)
- Symbol: `AP7343D-33W5-7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files: `ap7343d-33w5-7-etched.step` / `ap7343d-33w5-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap7343d-33w5-7.step` / `ap7343d-33w5-7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560090501362835456) (20 pp, sha256 `34e6b63381da732c`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ap7343d-33w5-7-datasheet.pdf)