component
AP7315DQ-29W5-7
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-25. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AP7315DQ-29W5-7
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25
AP7315DQ-29W5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin; the recommended input voltage range is 1.7V to 5.25V, and the absolute maximum input voltage is 6.0V. |
| 2 | GND | power_in | Ground pin; it should be connected to the external circuit ground with a wide trace to limit voltage drop from trace impedance. |
| 3 | EN | input | Enable pin that must be driven high or low and must not float; high (1.3V to 5.25V) enables the regulator and low (0V to 0.5V) puts it into shutdown. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated power output; with a short to GND, short-circuit protection clamps the output current to approximately 60mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 1.7 | 5.25 | V | 3 | ||
| Output Current | IOUT | 0 | 150 | mA | 3 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Operating Ambient Temperature | TA | -40 | 125 | °C | 3 | ||
| Input Voltage | VIN | 6 | V | 2 | |||
| Input Voltage EN | VEN | 6 | V | 2 | |||
| Output Voltage | VOUT | -0.3 | V | upper limit printed as VIN +0.3 V | 2 | ||
| Output Current | IOUT | 300 | mA | 2 | |||
| Power Dissipation | PD | 400 | mW | Ratings apply to ambient temperature at +25°C | 2 | ||
| Operating Junction Temperature | TJ | -40 | 150 | °C | 2 | ||
| Storage Temperature | TSTG | -55 | 150 | °C | 2 | ||
| ESD HBM Human Body Model ESD Protection | ESD HBM | 2 | KV | Human Body Model; printed as >2 KV | 2 | ||
| ESD CDM Charge Device Model | ESD CDM | -500 | 500 | V | 2 | ||
| EN Input Low Voltage | VEN | 0 | 0.5 | V | 3 | ||
| EN Input High Voltage | VEN | 1.3 | 5.25 | V | 3 | ||
| EN Input Leakage | -1 | 1 | µA | VEN = 0, VIN = 5.0V or VEN = 5.0V, VIN = 0V | 3 | ||
| Quiescent Current | IQ | 20 | 35 | 60 | µA | IOUT = 0mA | 3 |
| Quiescent Current | IQ | 30 | 60 | 100 | µA | IOUT = 150mA | 3 |
| Standby Current | ISTANDBY | 0.01 | 1 | µA | VEN = 0V (Disabled) | 3 | |
| Output Current | 150 | mA | 3 | ||||
| Line Regulation | dVOUT/dVIN/VOUT | 0.02 | 0.1 | %/V | VIN = (VOUT, Nom + 1.0V) to 5.25V, IOUT = 1.0mA | 3 | |
| Load Regulation | dVOUT/VOUT/dIOUT | 0.5 | 1 | %/A | VIN = VOUT - Nom + 1.0V, IOUT = 1mA to 150mA | 3 | |
| Dropout Voltage | 0.21 | 0.29 | V | IOUT = 150mA, 2.8V ≤ VOUT ≤ 3.3V | 3 | ||
| Output Voltage Temperature Coefficient | -30 | 30 | ppm/°C | IOUT = 30mA, TA = -40°C to +85°C | 3 | ||
| Output Voltage Temperature Coefficient | 30 | ppm/°C | IOUT = 30mA, TA = -40°C to +85°C | 3 | |||
| Fold-back Short Current | 55 | mA | VOUT Short to Ground | 3 | |||
| PSRR | 75 | dB | VIN = (VOUT+1V)VDC + 0.2Vp-pAC, VOUT ≥ 1.8V, IOUT = 30mA, f = 1kHz | 3 | |||
| Output Noise Voltage | 60 | µVrms | BW = 10Hz to 100kHz, IOUT = 30mA | 3 | |||
| On Resistance of N-channel for Auto-Discharge | 30 | Ω | VIN = 4.0V VEN = 0V (Disabled) | 3 | |||
| Thermal Resistance Junction to Ambient | ϴJA | 179 | °C/W | 3 | |||
| Thermal Resistance Junction to Case | ϴJC | 52 | °C/W | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Terminals: Finish - Matte Tin Plated Leads, Solderable per MILSTD-202, Method 208 • Weight: 0.016 grams (Approximate) | 1 |
CAD (KiCad official)
- Symbol:
AP7315DQ-29W5-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
ap7315dq-29w5-7-etched.step/ap7315dq-29w5-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap7315dq-29w5-7.step/ap7315dq-29w5-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (12 pp, sha256
21288c98424a2234, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AP7315DQ-29W5-7
**Diodes Incorporated** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-25
AP7315DQ-29W5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin; the recommended input voltage range is 1.7V to 5.25V, and the absolute maximum input voltage is 6.0V. |
| 2 | GND | power_in | Ground pin; it should be connected to the external circuit ground with a wide trace to limit voltage drop from trace impedance. |
| 3 | EN | input | Enable pin that must be driven high or low and must not float; high (1.3V to 5.25V) enables the regulator and low (0V to 0.5V) puts it into shutdown. |
| 4 | NC | unconnected | No connection. |
| 5 | VOUT | power_out | Regulated power output; with a short to GND, short-circuit protection clamps the output current to approximately 60mA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 1.7 | | 5.25 | V | | 3 |
| Output Current | IOUT | 0 | | 150 | mA | | 3 |
| Operating Junction Temperature | TJ | -40 | | 125 | °C | | 3 |
| Operating Ambient Temperature | TA | -40 | | 125 | °C | | 3 |
| Input Voltage | VIN | | | 6 | V | | 2 |
| Input Voltage EN | VEN | | | 6 | V | | 2 |
| Output Voltage | VOUT | -0.3 | | | V | upper limit printed as VIN +0.3 V | 2 |
| Output Current | IOUT | | | 300 | mA | | 2 |
| Power Dissipation | PD | | | 400 | mW | Ratings apply to ambient temperature at +25°C | 2 |
| Operating Junction Temperature | TJ | -40 | | 150 | °C | | 2 |
| Storage Temperature | TSTG | -55 | | 150 | °C | | 2 |
| ESD HBM Human Body Model ESD Protection | ESD HBM | 2 | | | KV | Human Body Model; printed as >2 KV | 2 |
| ESD CDM Charge Device Model | ESD CDM | -500 | | 500 | V | | 2 |
| EN Input Low Voltage | VEN | 0 | | 0.5 | V | | 3 |
| EN Input High Voltage | VEN | 1.3 | | 5.25 | V | | 3 |
| EN Input Leakage | | -1 | | 1 | µA | VEN = 0, VIN = 5.0V or VEN = 5.0V, VIN = 0V | 3 |
| Quiescent Current | IQ | 20 | 35 | 60 | µA | IOUT = 0mA | 3 |
| Quiescent Current | IQ | 30 | 60 | 100 | µA | IOUT = 150mA | 3 |
| Standby Current | ISTANDBY | | 0.01 | 1 | µA | VEN = 0V (Disabled) | 3 |
| Output Current | | 150 | | | mA | | 3 |
| Line Regulation | dVOUT/dVIN/VOUT | | 0.02 | 0.1 | %/V | VIN = (VOUT, Nom + 1.0V) to 5.25V, IOUT = 1.0mA | 3 |
| Load Regulation | dVOUT/VOUT/dIOUT | | 0.5 | 1 | %/A | VIN = VOUT - Nom + 1.0V, IOUT = 1mA to 150mA | 3 |
| Dropout Voltage | | | 0.21 | 0.29 | V | IOUT = 150mA, 2.8V ≤ VOUT ≤ 3.3V | 3 |
| Output Voltage Temperature Coefficient | | -30 | | 30 | ppm/°C | IOUT = 30mA, TA = -40°C to +85°C | 3 |
| Output Voltage Temperature Coefficient | | | 30 | | ppm/°C | IOUT = 30mA, TA = -40°C to +85°C | 3 |
| Fold-back Short Current | | | 55 | | mA | VOUT Short to Ground | 3 |
| PSRR | | | 75 | | dB | VIN = (VOUT+1V)VDC + 0.2Vp-pAC, VOUT ≥ 1.8V, IOUT = 30mA, f = 1kHz | 3 |
| Output Noise Voltage | | | 60 | | µVrms | BW = 10Hz to 100kHz, IOUT = 30mA | 3 |
| On Resistance of N-channel for Auto-Discharge | | | 30 | | Ω | VIN = 4.0V VEN = 0V (Disabled) | 3 |
| Thermal Resistance Junction to Ambient | ϴJA | | | 179 | °C/W | | 3 |
| Thermal Resistance Junction to Case | ϴJC | | | 52 | °C/W | | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | • Terminals: Finish - Matte Tin Plated Leads, Solderable per MILSTD-202, Method 208 • Weight: 0.016 grams (Approximate) | 1 |
## CAD (KiCad official)
- Symbol: `AP7315DQ-29W5-7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files: `ap7315dq-29w5-7-etched.step` / `ap7315dq-29w5-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap7315dq-29w5-7.step` / `ap7315dq-29w5-7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/AP7315DQ-29W5-7.pdf) (12 pp, sha256 `21288c98424a2234`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ap7315dq-29w5-7-datasheet.pdf)