component
AP7315-25W5-7
Public Made by Adomby adom
Diodes Incorporated Linear Voltage Regulators (LDO), SOT-25. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 8d ago |
| viewers | 8d ago |
| ap7315-25w5-7-etched.glb | 8d ago |
| ap7315-25w5-7-etched.step | 8d ago |
| ap7315-25w5-7-hero.glb | 8d ago |
| ap7315-25w5-7-hero.overlay.json | 8d ago |
| ap7315-25w5-7.glb | 8d ago |
| ap7315-25w5-7.kicad_mod | 8d ago |
| ap7315-25w5-7.kicad_sym | 8d ago |
| ap7315-25w5-7.lbr | 8d ago |
| ap7315-25w5-7.step | 8d ago |
| package.json | 8d ago |
| page.json | 8d ago |
| README.md | 8d ago |
AP7315-25W5-7
Diodes Incorporated · Linear Voltage Regulators (LDO) · SOT-25
AP7315-25W5-7 from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input pin, operating range 1.7V to 5.25V, with a minimum 0.47µF ceramic capacitor recommended to GND. |
| 2 | GND | power_in | Ground pin, which should be connected to the external circuit ground. |
| 3 | EN | input | Enable pin that must be driven high or low and not left floating; high (1.3V to 5.25V) enables the regulator and low (0V to 0.5V) puts it into shutdown. |
| 4 | NC | unconnected | Not connected internally; datasheet recommends connecting it to GND to maximize PCB copper for thermal dissipation. |
| 5 | VOUT | power_out | Power output pin (fixed 2.5V for this -25 version) that needs an output capacitor, 0.47µF in the typical application circuit, for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 1.7 | 5.25 | V | TA = -40°C to +85°C | 4 | |
| Output Voltage Accuracy | VOUT | -1 | 1 | % | VOUT ≥ 2.0V, VIN = VOUT+1V, TA = +25°C (VOUT0.99 to VOUT1.01) | 4 | |
| Line Regulation | dVOUT/dVIN/VOUT | 0.02 | 0.1 | %/V | VIN = (VOUT, Nom + 1.0V) to 5.25V, IOUT = 1.0mA | 4 | |
| Load Regulation | dVOUT/VOUT/dIOUT | 0.5 | 1 | %/A | VIN = VOUT - Nom + 1.0V, IOUT = 1mA to 150mA | 4 | |
| Quiescent Current | IQ | 20 | 35 | 60 | μA | IOUT = 0mA | 4 |
| Quiescent Current | IQ | 30 | 60 | 100 | μA | IOUT = 150mA | 4 |
| Standby Current | ISTANDBY | 0.01 | 1 | μA | VEN = 0V (Disabled) | 4 | |
| Dropout Voltage | 0.22 | 0.32 | V | IOUT = 150mA, 2.5V ≤ VOUT < 2.8V | 4 | ||
| EN Input Low Voltage | 0 | 0.5 | V | 4 | |||
| EN Input High Voltage | 1.3 | 5.25 | V | 4 | |||
| EN Input Leakage | -1 | 1 | µA | VEN = 0, VIN = 5.0V or VEN = 5.0V, VIN = 0V | 4 | ||
| Output Current | 150 | mA | 4 | ||||
| Fold-back Short Current | 55 | mA | VOUT Short to Ground | 4 | |||
| PSRR | PSRR | 75 | dB | VIN = (VOUT+1V)VDC + 0.2Vp-pAC, VOUT ≥ 1.8V, IOUT = 30mA, f = 1kHz | 4 | ||
| Output Noise Voltage | 60 | µVrms | BW = 10Hz to 100kHz, IOUT = 30mA | 4 | |||
| Output Voltage Temperature Coefficient | 30 | ppm/°C | IOUT = 30mA, TA = -40°C to +85°C (±30 typ) | 4 | |||
| Input Voltage | VIN | 6 | V | TA = +25°C | 3 | ||
| EN Input Voltage | VEN | 6 | V | TA = +25°C | 3 | ||
| Output Voltage | VOUT | -0.3 | V | -0.3 to VIN +0.3 V | 3 | ||
| Output Current | IOUT | 300 | mA | TA = +25°C | 3 | ||
| Power Dissipation | PD | 400 | mW | TA = +25°C | 3 | ||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 3 | ||
| Storage Temperature | TSTG | -55 | 125 | °C | 3 | ||
| Input Voltage | VIN | 1.7 | 5.25 | V | 3 | ||
| Output Current | IOUT | 0 | 150 | mA | 3 | ||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | capacitor is recommended between VIN and GND pins to decouple input power supply glitch. This input capacitor must be located as close as possible to the device to assure input stability and reduce no | 11 |
CAD (KiCad official)
- Symbol:
AP7315-25W5-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
ap7315-25w5-7-etched.step/ap7315-25w5-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap7315-25w5-7.step/ap7315-25w5-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (23 pp, sha256
2f34747c2b11e792, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).