component
AP7215-33SG-13
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 14d ago |
| viewers | 14d ago |
| ap7215-33sg-13-etched.glb | 14d ago |
| ap7215-33sg-13-etched.step | 14d ago |
| ap7215-33sg-13-hero.glb | 14d ago |
| ap7215-33sg-13-hero.overlay.json | 14d ago |
| ap7215-33sg-13.glb | 14d ago |
| ap7215-33sg-13.kicad_mod | 14d ago |
| ap7215-33sg-13.kicad_sym | 14d ago |
| ap7215-33sg-13.lbr | 14d ago |
| ap7215-33sg-13.step | 14d ago |
| package.json | 14d ago |
| page.json | 14d ago |
| README.md | 14d ago |
AP7215-33SG-13
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOP-8
AP7215-33SG-13 from Diodes Incorporated, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection pin on the SOP-8L package, listed as NC in the pin description table. |
| 2 | VROUT | power_out | Regulated 3.3V output that guarantees up to 600mA continuous load current, with current limit clamping at approximately 750mA and short-circuit clamping at approximately 50mA. |
| 3 | NC | unconnected | No connection pin on the SOP-8L package, listed as NC in the pin description table. |
| 4 | VIN | power_in | Supply input operating from 3.3V to 5.5V (absolute maximum +6V), with a 1µF ceramic input capacitor recommended close to the device. |
| 5 | NC | unconnected | No connection pin on the SOP-8L package, listed as NC in the pin description table. |
| 6 | VDOUT | output | Open-drain active-low reset output, typically pulled up to VIN through 100KΩ, that asserts low when VIN falls below the 3.83V to 3.98V detection voltage and releases after a 20ms typical delay. |
| 7 | GND | power_in | Ground reference for the regulator, to which the input and output capacitors must be returned. |
| 8 | EN | input | Enable input that turns VROUT on when driven above 1.6V (VEH) and off when driven below 0.25V (VEL); tie to VIN if the feature is not used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent Current | ICCQ | 50 | 80 | μA | IOUT = 0mA | 4 | |
| Standby Current | ISTBY | 15 | 30 | μA | VEN = GND, VIN = 5.0V | 4 | |
| Output Voltage Accuracy | VROUT | 3.234 | 3.3 | 3.366 | V | IOUT = 30mA, VIN = 5V | 4 |
| VROUT Temperature Coefficient | ΔVROUT/ΔTA/VROUT | -100 | 100 | ppm / oC | TA =-40°C to 85°C, IOUT = 30mA | 4 | |
| Dropout Voltage | VDO | 60 | 100 | mV | IOUT = 30mA | 4 | |
| Dropout Voltage | VDO | 100 | 250 | mV | IOUT = 100mA | 4 | |
| Maximum Output Current | IOUT | 600 | mA | VIN = 5.3V | 4 | ||
| Line Regulation | ΔVROUT/ΔVIN/VROUT | -0.2 | 0.01 | 0.2 | %/V | 4.3V ≤ VIN ≤ 5.5V, IOUT = 30mA | 4 |
| Load Regulation | ΔVROUT | 15 | 50 | mV | 1mA ≤ IOUT ≤ 100mA, VIN = 5.3V | 4 | |
| EN Input Threshold, Output ON | VEH | 1.6 | V | Output ON | 4 | ||
| EN Input Threshold, Output OFF | VEL | 0.25 | V | Output OFF | 4 | ||
| Enable Pin Current | IEN | -0.1 | 0.1 | μA | 4 | ||
| VIN Detection Voltage | VDF | 3.83 | 3.91 | 3.98 | V | Detect VDOUT fall | 4 |
| VDOUT Sink Current | IVDOUT | 20 | mA | VDOUT = 0.5V, VIN = 2.0V | 4 | ||
| VDOUT Sink Current | IVDOUT | 30 | mA | VDOUT = 0.5V, VIN = 3.0V | 4 | ||
| VDOUT Delay Time | tRP | 10 | 20 | 40 | ms | 4 | |
| Input Voltage | VIN | 3.3 | 5.5 | V | 3 | ||
| Output Current | IOUT | 0 | 600 | mA | 3 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | ºC | 3 | ||
| Operating Ambient Temperature | TA | -40 | 85 | ºC | 3 | ||
| Input Voltage (absolute maximum) | VIN | 6 | V | 3 | |||
| ESD HBM Protection | ESD HBM | 2 | KV | Human Body Model | 3 | ||
| ESD MM Protection | ESD MM | 350 | V | Machine Model | 3 | ||
| Maximum Junction Temperature | TJ(MAX) | 150 | ºC | 3 | |||
| Power Dissipation | PD | 1.2 | W | SOP-8L | 3 | ||
| Current Limit | ILIMIT | 750 | mA | VIN = 5.3V | 4 | ||
| Short Circuit Current | ISHORT | 50 | mA | VIN = 5.3V | 4 | ||
| Power Supply Rejection | PSRR | 55 | dB | VIN = 4.3V+0.5Vp-pAC, IOUT = 50mA, F = 1KHz | 4 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 124 | ºC/W | SOP-8L, Note 3: FR-4 single-sided PCB, 2oz copper, minimum recommended pad layout | 4 | ||
| Thermal Resistance Junction-to-Case | θJC | 25 | ºC/W | SOP-8L, Note 3: FR-4 single-sided PCB, 2oz copper, minimum recommended pad layout | 4 |
CAD (KiCad official)
- Symbol:
AP7215-33SG-13 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ap7215-33sg-13-etched.step/ap7215-33sg-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap7215-33sg-13.step/ap7215-33sg-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (11 pp, sha256
ed93efcef98b358f, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).