AP7167-SPG-13

{
  "schema_version": 1,
  "type": "component",
  "slug": "ap7167-spg-13",
  "title": "AP7167-SPG-13",
  "brief": "Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "ap7167-spg-13"
  ],
  "component": {
    "mpn": "AP7167-SPG-13",
    "manufacturer": "Diodes Incorporated",
    "package": "SOIC-8-EP",
    "pin_count": 9,
    "category": "PMIC",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.diodes.com/assets/Datasheets/AP7167-SPG-13.pdf",
    "parts": {
      "symbol": "ap7167-spg-13.kicad_sym",
      "footprint": "ap7167-spg-13.kicad_mod",
      "model_3d": "ap7167-spg-13-etched.glb",
      "model_3d_plain": "ap7167-spg-13.glb",
      "model_3d_step": "ap7167-spg-13-etched.step",
      "model_3d_step_plain": "ap7167-spg-13.step",
      "lbr": "ap7167-spg-13.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Voltage input pin. Pin 1 and pin 2 must be tied together externally. Bypass to ground through at least a 1µF ceramic capacitor. Input range 2.2V to 5.5V."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Voltage input pin. Pin 1 and pin 2 must be tied together externally. Bypass to ground through at least a 1µF ceramic capacitor."
      },
      {
        "number": "3",
        "name": "POK",
        "type": "output",
        "description": "Power-OK output, active-high open-drain. Requires an external pull-up resistor (recommended 10kΩ-1MΩ) to a rail ≤ 5.5V. Sink current up to 4mA. Asserts when FB (or OUT) rises above ~92% of Vref. POK must be disconnected from IN pin."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Enable input, active high. Vih ≥ 1.4V enables the regulator; Vil ≤ 0.4V shuts it down. Tie to IN to keep the regulator always on. Input leakage ≤ 1µA."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the regulator."
      },
      {
        "number": "6",
        "name": "FB",
        "type": "input",
        "description": "Output feedback input to the internal error amplifier. Regulates to Vref = 0.8V typical. Set output via external divider: Vout = Vref × (1 + R1/R2); keep R2 < 250kΩ for reference stability. FB leakage ≤ 1µA."
      },
      {
        "number": "7",
        "name": "OUT",
        "type": "power_out",
        "description": "Voltage output pin. Pin 7 and pin 8 must be tied together externally. Bypass to ground with at least a 4.7µF ceramic capacitor. Output range 0.8V to 5.0V, up to 1.2A."
      },
      {
        "number": "8",
        "name": "OUT",
        "type": "power_out",
        "description": "Voltage output pin. Pin 7 and pin 8 must be tied together externally. Bypass to ground with at least a 4.7µF ceramic capacitor."
      },
      {
        "number": "EP",
        "name": "EP",
        "type": "passive",
        "description": "Exposed thermal pad on package underside. Primary conduction path for heat to the PCB; connect to a copper thermal plane. May be tied to GND or left floating, but should be soldered to copper for thermal performance (θJA ≈ 27°C/W)."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.diodes.com/assets/Datasheets/AP7167-SPG-13.pdf",
        "pages": 14,
        "sha256": "5ff6f0abf2d05446",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ap7167-spg-13.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap7167-spg-13-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.55
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b57c20445055bf41ffda26bc90ec87b36af3994078bb55777ec47a70d65c47d8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Diodes Incorporated",
      "Package": "SOIC-8-EP",
      "Category": "PMIC",
      "Pins": "9"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ap7167-spg-13"
  ],
  "discovery_pitch": "AP7167-SPG-13 (Diodes Incorporated) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap7167-spg-13.kicad_sym",
    "ap7167-spg-13.kicad_mod",
    "ap7167-spg-13.glb",
    "ap7167-spg-13.step",
    "ap7167-spg-13.lbr",
    "docs/hero.png",
    "docs/ap7167-spg-13-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap7167-spg-13-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T16:43:36.183Z"
}