component
AP7115-28SEG-7
Public Made by Adomby adom
DIODES INC. Global Sourcing Parts, SOT-353. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AP7115-28SEG-7
DIODES INC. · Global Sourcing Parts · SOT-353
AP7115-28SEG-7 from DIODES INC., in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Voltage input for the regulator, specified for 2.5V to 5.5V operation with an absolute maximum input voltage of -0.3 to 5.5V, and a 1µF input capacitor is required between IN and GND. |
| 2 | GND | power_in | Ground reference pin, to which the 1µF input capacitor and the 0.1µF band-gap bypass capacitor are connected. |
| 3 | EN | input | Chip enable control: pulling EN low shuts the regulator down and driving it high turns it on, with VIH,EN of at least 2.0V, VIL,EN of at most 0.7V, and an absolute maximum EN voltage of -0.3 to 5.5V. |
| 4 | BP | passive | Band-gap bypass pin, where a 0.1µF capacitor between BP and GND reduces output voltage noise, with an absolute maximum pin voltage of -0.3 to 5.5V. |
| 5 | OUT | power_out | Regulated voltage output, guaranteeing 150mA output current with a current limit of 200mA minimum and 250mA typical, and an output voltage limited to -0.3V to VIN+0.3V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DIODES INC. |
| Package | SOT-353 |
| Category | Global Sourcing Parts |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.5 | 5.5 | V | IL = 0 to 150mA | 3 | |
| Output Voltage Accuracy | VOUT/VOUT | -2 | 2 | % | VIN = VOUT + 1V where 1mA IOUT 50mA | 3 | |
| Dropout Voltage | VDO | 200 | 300 | mV | IL = 150mA | 3 | |
| Output Current | IOUT | 150 | mA | VIN - VOUT = 1V | 3 | ||
| Quiescent Current | IQ | 50 | 80 | µA | VIN = VOUT + 1V where IOUT = 0 and VEN = VIN | 3 | |
| Shutdown Current | ISHUTDOWN | 0.1 | 1 | µA | VIN = VOUT + 1V where IOUT = 0 and VEN = 0 | 3 | |
| Current Limit | ILIMIT | 200 | 250 | mA | 3 | ||
| Thermal Shutdown | TSHUTDOWN | 150 | °C | 3 | |||
| Tempco of Bandgap Reference | VREF/T | 30 | 50 | ppm/°C | 3 | ||
| Tempco of Output Voltage | VOUT/T | 50 | 100 | ppm/°C | IOUT = 30mA, -40°C TA +85°C | 3 | |
| EN Input High Voltage | VIH,EN | 2 | V | 3 | |||
| EN Input Low Voltage | VIL,EN | 0.7 | V | 3 | |||
| EN Pin Leakage Current | IEN | 0.01 | 0.1 | µA | VEN = VIN @VIN = 5.0V and VSS = 0V | 3 | |
| Line Regulation | VO/VIN | 0.02 | 0.1 | %/V | VOUT + 0.5V VIN 5.5V where VOUT > 2.0V, IOUT = 30mA | 3 | |
| Load Regulation | VLOAD | 0.003 | 0.006 | %/mA | 1mA IL 150mA where VIN = VOUT + 1V | 3 | |
| Operating Input Voltage (recommended) | VIN | 2.5 | 5.5 | V | 3 | ||
| Output Current (recommended) | IOUT | 150 | mA | 3 | |||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 3 | ||
| ESD HBM Protection | ESD HBM | 3.5 | kV | Human Body Model | 2 | ||
| ESD MM Protection | ESD MM | 400 | V | Machine Model | 2 | ||
| Input Voltage | VIN | -0.3 | 5.5 | V | 2 | ||
| EN Pin Voltage | VEN | -0.3 | 5.5 | V | 2 | ||
| Output Voltage | VOUT | -0.3 | V | Upper limit printed as VIN+0.3 | 2 | ||
| Band Gap Bypass Pin Voltage | VBP | -0.3 | 5.5 | V | 2 | ||
| Power Dissipation | PD | 500 | mW | 2 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 2 | ||
| Storage Temperature Range | TST | -65 | 150 | °C | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 337 | °C/W | SOT353 (Note 4) | 3 | ||
| Thermal Resistance Junction-to-Case | θJC | 121 | °C/W | SOT353 (Note 4) | 3 |
CAD (KiCad official)
- Symbol:
AP7115-28SEG-7 - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files:
ap7115-28seg-7-etched.step/ap7115-28seg-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap7115-28seg-7.step/ap7115-28seg-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: DIODES INC. datasheet (12 pp, sha256
55c2acddfd9ee1fa, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AP7115-28SEG-7
**DIODES INC.** · Global Sourcing Parts · SOT-353
AP7115-28SEG-7 from DIODES INC., in a SOT-353. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Voltage input for the regulator, specified for 2.5V to 5.5V operation with an absolute maximum input voltage of -0.3 to 5.5V, and a 1µF input capacitor is required between IN and GND. |
| 2 | GND | power_in | Ground reference pin, to which the 1µF input capacitor and the 0.1µF band-gap bypass capacitor are connected. |
| 3 | EN | input | Chip enable control: pulling EN low shuts the regulator down and driving it high turns it on, with VIH,EN of at least 2.0V, VIL,EN of at most 0.7V, and an absolute maximum EN voltage of -0.3 to 5.5V. |
| 4 | BP | passive | Band-gap bypass pin, where a 0.1µF capacitor between BP and GND reduces output voltage noise, with an absolute maximum pin voltage of -0.3 to 5.5V. |
| 5 | OUT | power_out | Regulated voltage output, guaranteeing 150mA output current with a current limit of 200mA minimum and 250mA typical, and an output voltage limited to -0.3V to VIN+0.3V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DIODES INC. |
| Package | SOT-353 |
| Category | Global Sourcing Parts |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Operating Voltage | VIN | 2.5 | | 5.5 | V | IL = 0 to 150mA | 3 |
| Output Voltage Accuracy | VOUT/VOUT | -2 | | 2 | % | VIN = VOUT + 1V where 1mA IOUT 50mA | 3 |
| Dropout Voltage | VDO | | 200 | 300 | mV | IL = 150mA | 3 |
| Output Current | IOUT | 150 | | | mA | VIN - VOUT = 1V | 3 |
| Quiescent Current | IQ | | 50 | 80 | µA | VIN = VOUT + 1V where IOUT = 0 and VEN = VIN | 3 |
| Shutdown Current | ISHUTDOWN | | 0.1 | 1 | µA | VIN = VOUT + 1V where IOUT = 0 and VEN = 0 | 3 |
| Current Limit | ILIMIT | 200 | 250 | | mA | | 3 |
| Thermal Shutdown | TSHUTDOWN | | 150 | | °C | | 3 |
| Tempco of Bandgap Reference | VREF/T | | 30 | 50 | ppm/°C | | 3 |
| Tempco of Output Voltage | VOUT/T | | 50 | 100 | ppm/°C | IOUT = 30mA, -40°C TA +85°C | 3 |
| EN Input High Voltage | VIH,EN | 2 | | | V | | 3 |
| EN Input Low Voltage | VIL,EN | | | 0.7 | V | | 3 |
| EN Pin Leakage Current | IEN | | 0.01 | 0.1 | µA | VEN = VIN @VIN = 5.0V and VSS = 0V | 3 |
| Line Regulation | VO/VIN | | 0.02 | 0.1 | %/V | VOUT + 0.5V VIN 5.5V where VOUT > 2.0V, IOUT = 30mA | 3 |
| Load Regulation | VLOAD | | 0.003 | 0.006 | %/mA | 1mA IL 150mA where VIN = VOUT + 1V | 3 |
| Operating Input Voltage (recommended) | VIN | 2.5 | | 5.5 | V | | 3 |
| Output Current (recommended) | IOUT | | | 150 | mA | | 3 |
| Operating Ambient Temperature | TA | -40 | | 85 | °C | | 3 |
| ESD HBM Protection | ESD HBM | | | 3.5 | kV | Human Body Model | 2 |
| ESD MM Protection | ESD MM | | | 400 | V | Machine Model | 2 |
| Input Voltage | VIN | -0.3 | | 5.5 | V | | 2 |
| EN Pin Voltage | VEN | -0.3 | | 5.5 | V | | 2 |
| Output Voltage | VOUT | -0.3 | | | V | Upper limit printed as VIN+0.3 | 2 |
| Band Gap Bypass Pin Voltage | VBP | -0.3 | | 5.5 | V | | 2 |
| Power Dissipation | PD | | | 500 | mW | | 2 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | | 2 |
| Storage Temperature Range | TST | -65 | | 150 | °C | | 2 |
| Thermal Resistance Junction-to-Ambient | θJA | | 337 | | °C/W | SOT353 (Note 4) | 3 |
| Thermal Resistance Junction-to-Case | θJC | | 121 | | °C/W | SOT353 (Note 4) | 3 |
## CAD (KiCad official)
- Symbol: `AP7115-28SEG-7`
- Footprint: `Package_TO_SOT_SMD:SOT-353_SC-70-5`
- 3D model: SOT-353 (KiCad packages3D, STEP)
- 3D model files: `ap7115-28seg-7-etched.step` / `ap7115-28seg-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap7115-28seg-7.step` / `ap7115-28seg-7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [DIODES INC. datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589838663976202240) (12 pp, sha256 `55c2acddfd9ee1fa`, retrieved 2026-10-21, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ap7115-28seg-7-datasheet.pdf)