component
AP6714M10G-13
Public Made by Adomby adom
Diodes Incorporated DC-DC Converters, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAP6714M10G-13
Diodes Incorporated · DC-DC Converters · MSOP-10
AP6714M10G-13 from Diodes Incorporated, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power input pin; abs max -0.3 to +6.5V to GND, and EN is tied to VCC if shutdown is not used. |
| 2 | EN | input | Enable input; low (max 0.4V) stops switching and high (min 0.8V) turns the converter on, with 1.5V<VCC<5.5V. |
| 3 | CC | passive | Channel compensation pin for the error amplifier, with an external compensation network (Rcc and C2 in the typical application circuit). |
| 4 | FB | input | Channel feedback pin connected to the output resistor divider and regulated to the 1.23V reference; keep the feedback network within 5mm of this pin. |
| 5 | REF | output | Internal reference voltage output (1.205V to 1.255V, typ 1.23V), bypassed with an external capacitor. |
| 6 | SGND | power_in | Signal ground, to be joined with power ground at only one point on the PCB. |
| 7 | PGND | power_in | Power ground; the OCP sense resistor is connected between PGND and the OCP pin. |
| 8 | OCP | input | Over current protection sense pin; output voltage and duty drop if the voltage across ROCP exceeds 0.16V. |
| 9 | LX | passive | Switch node connecting to the inductor; LX current rated 1.6A and voltage -0.3 to (OUT+0.3)V. |
| 10 | OUT | power_out | Boost output pin, adjustable 1.8V to 5.5V; abs max -0.3 to +6.5V to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | MSOP-10 |
| Category | Power Management ICs |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Standby Current | ISTB | 0.5 | 1 | µA | VCC = 3.6V, VEN = 0V | 3 | |
| Supply Current | ICC | 150 | 300 | µA | VCC = EN = 3.6V, FB = 1.5V | 3 | |
| Reference Output Voltage | VREF | 1.205 | 1.23 | 1.255 | V | 3 | |
| Tempco of Reference | ΔVREF/ΔT | 30 | 50 | ppm/°C | -40°C ≤ T ≤ 125°C | 3 | |
| Reference Load Regulation | VREF(LOAD) | 4.5 | 10 | mV | 10mA < ILOAD < 200mA | 3 | |
| Reference Line Regulation | VREF(LINE) | 1.3 | 5 | mV | 2.8 < VCC < 5.5V | 3 | |
| OSC Frequency | FOSC | 1400 | 1800 | 2200 | KHz | 3 | |
| Tempco of Output Voltage | ΔVOUT/ΔT | 50 | 100 | ppm/°C | IOUT = 10mA, -40°C ≤ T ≤ 85°C | 3 | |
| FB Input Leakage Current | -100 | 0.01 | 100 | nA | FB = 1.25V | 3 | |
| Maximum Duty Cycle | Duty | 80 | 85 | 90 | % | FB = 0V | 3 |
| OUT Leakage Current | IOUT | 1 | 5 | µA | VLX = 0V, OUT = 5V | 3 | |
| LX Leakage Current | ILXL | 2 | 5 | µA | VLX = OUT = 5V | 3 | |
| N-Channel Current Limit | ILM | 1.2 | 1.4 | 1.6 | A | VIN = 1.5V | 3 |
| EN Input Low Level | 0.4 | V | 1.5V < VCC < 5.5V | 3 | |||
| EN Input High Level | 0.8 | V | 1.5V < VCC < 5.5V | 3 | |||
| Switch On-Resistance N channel | RDS(ON) | 200 | mΩ | N channel, Vcc = 5V | 3 | ||
| Switch On-Resistance P channel | RDS(ON) | 300 | mΩ | P channel, Vcc = 5V | 3 | ||
| Thermal Shutdown | 150 | °C | 3 | ||||
| Thermal Hysteresis | 40 | °C | 3 | ||||
| Over Current Protection Voltage | VOCP | 0.16 | V | ROCP = 0.1Ω | 3 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 161 | °C/W | MSOP-10L (Note 5) | 3 | ||
| Thermal Resistance Junction-to-Case | θJC | 43 | °C/W | MSOP-10L (Note 5) | 3 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Supply Voltage at VIN | VIN | 0.9 | 5.5 | V | Note 3 | 3 | |
| Output Voltage | VOUT | 1.8 | 5.5 | V | 3 | ||
| ESD HBM | ESD HBM | 3 | kV | Human Body Model | 2 | ||
| ESD MM | ESD MM | 250 | V | Machine Model | 2 | ||
| OUT, VCC, EN, FB, OCP to GND | -0.3 | 6.5 | V | 2 | |||
| LX to GND | -0.3 | V | upper limit OUT + 0.3 V | 2 | |||
| LX Current | ILX | 1.6 | A | 2 | |||
| REF, CC to GND | -0.3 | V | upper limit VCC + 0.3 V | 2 | |||
| Continuous Power Dissipation | PD | 850 | mW | TA = 25°C | 2 | ||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 2 | ||
| Storage Temperature Range | TST | -65 | 150 | °C | 2 |
CAD (KiCad official)
- Symbol:
AP6714M10G-13 - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
ap6714m10g-13-etched.step/ap6714m10g-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap6714m10g-13.step/ap6714m10g-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (11 pp, sha256
f79fad83067738be, retrieved 2026-10-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).