component
AP62201WU-7
Public Made by Adomby adom
Diodes Incorporated DC-DC Converters, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAP62201WU-7
Diodes Incorporated · DC-DC Converters · TSOT-23-6
AP62201WU-7 from Diodes Incorporated, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground for the regulator, to which the input and output capacitors return and which should be connected to the GND plane with many vias for heat dissipation. |
| 2 | SW | power_out | Power switching output that is the switching node supplying power to the output, with the output LC filter connected from SW to the load. |
| 3 | VIN | power_in | Power input that supplies the IC and the step-down power MOSFETs and must be driven from a 4.2V to 18V source and bypassed to GND with a suitably large capacitor. |
| 4 | FB | input | Feedback sensing terminal for the output voltage, connected to the output resistive divider, with the regulation reference at 0.8V for AP62201. |
| 5 | EN | input | Enable input that turns the regulator on when driven above its 1.2V precision threshold and off when driven low, and can be left floating for automatic startup while also setting the UVLO thresholds. |
| 6 | BST | input | High-side gate drive boost input that supplies the high-side N-channel MOSFET driver, with a 100nF capacitor recommended from BST to SW. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Recommended VIN Supply Voltage | VIN | 4.2 | 18 | V | 4 | ||
| Recommended Output Voltage | VOUT | 0.8 | 7 | V | 4 | ||
| Recommended Operating Junction Temperature | TJ | -40 | 125 | °C | 4 | ||
| VIN Supply Pin Voltage | VIN | -0.3 | 20 | V | DC | 4 | |
| VIN Supply Pin Voltage | VIN | -0.3 | 22 | V | 400ms | 4 | |
| Switch Pin Voltage | VSW | -1 | V | DC; max printed as VIN + 0.3 | 4 | ||
| Switch Pin Voltage | VSW | -2.5 | V | 20ns; max printed as VIN + 2.0 | 4 | ||
| Enable/UVLO Pin Voltage | VEN | -0.3 | 8 | V | 4 | ||
| Feedback Pin Voltage | VFB | -0.3 | 6 | V | 4 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 4 | ||
| Junction Temperature | TJ | 160 | °C | 4 | |||
| Lead Temperature | TL | 260 | °C | 4 | |||
| ESD Human Body Model | HBM | -2000 | 2000 | V | Human Body Model (printed ±2000 V) | 4 | |
| ESD Charged Device Model | CDM | -500 | 500 | V | Charged Device Model (printed ±500 V) | 4 | |
| VIN Power-on Reset Rising Threshold | POR | 3.9 | 4.15 | V | 5 | ||
| Feedback Voltage (AP62201 variant) | VFB | 0.792 | 0.8 | 0.808 | V | TA = +25°C, CCM | 5 |
| Feedback Voltage (AP62201 variant) | VFB | 0.784 | 0.8 | 0.816 | V | AP62200/AP62201: CCM | 5 |
| LS Valley Current Limit | IVALLEY_LIMIT | 2 | 2.4 | 2.8 | A | From Source to Drain | 5 |
| EN Logic High Threshold | VEN_H | 1.2 | 1.25 | V | 5 | ||
| EN Logic Low Threshold | VEN_L | 1.04 | 1.1 | V | 5 | ||
| EN Input Current | IEN | 1 | 1.5 | 2 | μA | VEN = 1V | 5 |
| Junction to Ambient Thermal Resistance (TSOT26) | θJA | 70 | °C/W | TSOT26 (Standard), FR-4 two-layer PCB, 2oz copper, minimum recommended pad layout | 4 | ||
| Junction to Case Thermal Resistance (TSOT26) | θJC | 12 | °C/W | TSOT26 (Standard) | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.003 grams (Approximate) | 22 |
CAD (KiCad official)
- Symbol:
AP62201WU-7 - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ap62201wu-7-etched.step/ap62201wu-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap62201wu-7.step/ap62201wu-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (23 pp, sha256
33d13b59c3ae9208, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).