component
AP62150WU-7
Public Made by Adomby adom
Diodes Incorporated DC-DC Converters, TSOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AP62150WU-7
Diodes Incorporated · DC-DC Converters · TSOT-23-6
AP62150WU-7 from Diodes Incorporated, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground return for the regulator, to which VIN and the output capacitors should be closely returned. |
| 2 | SW | power_out | Power switching output that supplies power to the load through the output LC filter connected from SW to the output. |
| 3 | VIN | power_in | Power input that supplies the IC and the step-down power MOSFETs; drive with a 4.2 V to 18 V source and bypass to GND with a suitably large capacitor. |
| 4 | FB | input | Feedback sensing input for the output voltage; connect to the output resistive divider. |
| 5 | EN | input | Digital enable input that turns the regulator on when driven high (precision threshold 1.2 V) and off when driven low; leave floating for automatic startup. |
| 6 | BST | input | High-side gate drive boost input; a 100 nF ceramic capacitor is recommended from BST to SW to power the high-side driver. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Power-On Reset Rising Threshold | POR | 3.9 | 4.15 | V | 5 | ||
| LS Valley Current Limit | IVALLEY_LIMIT | 2.1 | 2.5 | 2.9 | A | From source to drain | 5 |
| Feedback Voltage | VFB | 0.792 | 0.8 | 0.808 | V | TA = +25°C, CCM | 5 |
| Feedback Voltage | VFB | 0.784 | 0.8 | 0.816 | V | CCM | 5 |
| EN Logic High Threshold | VEN_H | 1.2 | 1.25 | V | 5 | ||
| EN Logic Low Threshold | VEN_L | 1.04 | 1.1 | V | 5 | ||
| EN Input Current | IEN | 1 | 1.5 | 2 | μA | VEN = 1V | 5 |
| VIN Supply Pin Voltage | VIN | -0.3 | 20 | V | DC | 4 | |
| VIN Supply Pin Voltage | VIN | -0.3 | 22 | V | 400ms | 4 | |
| Switch Pin Voltage | VSW | -1 | V | DC | 4 | ||
| Switch Pin Voltage | VSW | -2.5 | V | 20ns | 4 | ||
| Enable/UVLO Pin Voltage | VEN | -0.3 | 6 | V | 4 | ||
| Feedback Pin Voltage | VFB | -0.3 | 6 | V | 4 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 4 | ||
| Junction Temperature | TJ | 160 | °C | 4 | |||
| Lead Temperature | TL | 260 | °C | 4 | |||
| ESD Susceptibility Human Body Model | HBM | -2000 | 2000 | V | 4 | ||
| ESD Susceptibility Charged Device Model | CDM | -500 | 500 | V | 4 | ||
| Supply Voltage | VIN | 4.2 | 18 | V | 4 | ||
| Output Voltage | VOUT | 0.8 | 7 | V | 4 | ||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 4 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction to Ambient Thermal Resistance, TSOT26 (Standard) | θJA | 70 | °C/W | Note 6: FR-4, two-layer PCB, 2oz copper, minimum recommended pad layout | 4 | ||
| Junction to Case Thermal Resistance, TSOT26 (Standard) | θJC | 12 | °C/W | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.003 grams (Approximate) | 20 |
CAD (KiCad official)
- Symbol:
AP62150WU-7 - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ap62150wu-7-etched.step/ap62150wu-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap62150wu-7.step/ap62150wu-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (21 pp, sha256
1bf597ad76963e53, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AP62150WU-7
**Diodes Incorporated** · DC-DC Converters · TSOT-23-6
AP62150WU-7 from Diodes Incorporated, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground return for the regulator, to which VIN and the output capacitors should be closely returned. |
| 2 | SW | power_out | Power switching output that supplies power to the load through the output LC filter connected from SW to the output. |
| 3 | VIN | power_in | Power input that supplies the IC and the step-down power MOSFETs; drive with a 4.2 V to 18 V source and bypass to GND with a suitably large capacitor. |
| 4 | FB | input | Feedback sensing input for the output voltage; connect to the output resistive divider. |
| 5 | EN | input | Digital enable input that turns the regulator on when driven high (precision threshold 1.2 V) and off when driven low; leave floating for automatic startup. |
| 6 | BST | input | High-side gate drive boost input; a 100 nF ceramic capacitor is recommended from BST to SW to power the high-side driver. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TSOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Power-On Reset Rising Threshold | POR | | 3.9 | 4.15 | V | | 5 |
| LS Valley Current Limit | IVALLEY_LIMIT | 2.1 | 2.5 | 2.9 | A | From source to drain | 5 |
| Feedback Voltage | VFB | 0.792 | 0.8 | 0.808 | V | TA = +25°C, CCM | 5 |
| Feedback Voltage | VFB | 0.784 | 0.8 | 0.816 | V | CCM | 5 |
| EN Logic High Threshold | VEN_H | | 1.2 | 1.25 | V | | 5 |
| EN Logic Low Threshold | VEN_L | 1.04 | 1.1 | | V | | 5 |
| EN Input Current | IEN | 1 | 1.5 | 2 | μA | VEN = 1V | 5 |
| VIN Supply Pin Voltage | VIN | -0.3 | | 20 | V | DC | 4 |
| VIN Supply Pin Voltage | VIN | -0.3 | | 22 | V | 400ms | 4 |
| Switch Pin Voltage | VSW | -1 | | | V | DC | 4 |
| Switch Pin Voltage | VSW | -2.5 | | | V | 20ns | 4 |
| Enable/UVLO Pin Voltage | VEN | -0.3 | | 6 | V | | 4 |
| Feedback Pin Voltage | VFB | -0.3 | | 6 | V | | 4 |
| Storage Temperature | TSTG | -65 | | 150 | °C | | 4 |
| Junction Temperature | TJ | | | 160 | °C | | 4 |
| Lead Temperature | TL | | | 260 | °C | | 4 |
| ESD Susceptibility Human Body Model | HBM | -2000 | | 2000 | V | | 4 |
| ESD Susceptibility Charged Device Model | CDM | -500 | | 500 | V | | 4 |
| Supply Voltage | VIN | 4.2 | | 18 | V | | 4 |
| Output Voltage | VOUT | 0.8 | | 7 | V | | 4 |
| Operating Ambient Temperature | TA | -40 | | 85 | °C | | 4 |
| Operating Junction Temperature | TJ | -40 | | 125 | °C | | 4 |
| Junction to Ambient Thermal Resistance, TSOT26 (Standard) | θJA | | 70 | | °C/W | Note 6: FR-4, two-layer PCB, 2oz copper, minimum recommended pad layout | 4 |
| Junction to Case Thermal Resistance, TSOT26 (Standard) | θJC | | 12 | | °C/W | | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.003 grams (Approximate) | 20 |
## CAD (KiCad official)
- Symbol: `AP62150WU-7`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `ap62150wu-7-etched.step` / `ap62150wu-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap62150wu-7.step` / `ap62150wu-7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586207900909359104) (21 pp, sha256 `1bf597ad76963e53`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ap62150wu-7-datasheet.pdf)