component
AP61300Z6-7
Public Made by Adomby adom
Diodes Incorporated DC-DC Converters, SOT-563. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAP61300Z6-7
Diodes Incorporated · DC-DC Converters · SOT-563
AP61300Z6-7 from Diodes Incorporated, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback sensing terminal for the output voltage that must be connected to the resistive divider of the output (see Setting the Output Voltage). |
| 2 | GND | power_in | Power ground for the device. |
| 3 | VIN | power_in | Power input that supplies the IC and the step-down converter MOSFETs; drive with a 2.4V to 5.5V source and bypass to GND with a suitably large capacitor. |
| 4 | SW | output | Power switching output, the switching node that supplies power to the output, with the output LC filter connected from SW to the load. |
| 5 | EN | input | Digital enable input that turns the regulator on when driven high and off when driven low, and also programs PFM or PWM operation mode. |
| 6 | OUT | power_out | Output voltage power rail (AP61300 pin 6) that connects to the output load and must not be tied to GND; it may be left unconnected only if C3 is installed as in Figure 2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-563 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Power-On Reset Rising Threshold | POR | 2.3 | 2.4 | V | 5 | ||
| HS Peak Current Limit | IPEAK_LIMIT | 3.5 | 5.5 | A | From Source to Drain | 5 | |
| Feedback Voltage | VFB | 0.588 | 0.6 | 0.612 | V | CCM | 5 |
| Supply Voltage | VIN | 2.4 | 5.5 | V | 4 | ||
| Output Voltage | VOUT | 0.6 | 3.6 | V | 4 | ||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 4 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 4 | ||
| VIN Supply Pin Voltage | VIN | -0.3 | 6.5 | V | DC | 4 | |
| VIN Supply Pin Voltage | VIN | -0.3 | 7 | V | 400ms | 4 | |
| Feedback Pin Voltage | VFB | -0.3 | V | 4 | |||
| Switch Pin Voltage | VSW | -1 | V | DC | 4 | ||
| Switch Pin Voltage | VSW | -2.5 | V | 20ns | 4 | ||
| Enable Pin Voltage | VEN | -0.3 | V | 4 | |||
| Output Pin Voltage (AP61300) | VOUT | -0.3 | 6 | V | DC | 4 | |
| Storage Temperature | TST | -65 | 150 | °C | 4 | ||
| Junction Temperature | TJ | 160 | °C | 4 | |||
| Lead Temperature | TL | 260 | °C | 4 | |||
| ESD Susceptibility HBM | HBM | -6000 | 6000 | V | Human Body Model | 4 | |
| ESD Susceptibility CDM | CDM | -2000 | 2000 | V | Charged Device Model | 4 | |
| Junction to Ambient Thermal Resistance (SOT563) | θJA | 141 | °C/W | Device mounted on FR-4, two-layer PCB, 2oz copper, minimum recommended pad layout | 4 | ||
| Junction to Case Thermal Resistance (SOT563) | θJC | 33 | °C/W | Device mounted on FR-4, two-layer PCB, 2oz copper, minimum recommended pad layout | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 • Weight: 0.003 grams (Approximate) | 20 |
CAD (KiCad official)
- Symbol:
AP61300Z6-7 - Footprint:
Package_TO_SOT_SMD:SOT-563 - 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files:
ap61300z6-7-etched.step/ap61300z6-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap61300z6-7.step/ap61300z6-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (21 pp, sha256
d56a2758b53a63c0, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).