component
AP61200Z6-7
Public Made by Adomby adom
DIODES INCORPORATED Global Sourcing Parts, SOT-563. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AP61200Z6-7
DIODES INCORPORATED · Global Sourcing Parts · SOT-563
AP61200Z6-7 from DIODES INCORPORATED, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback sensing terminal for the output voltage; connect it to the resistive divider of the output (0.6V reference, VFB 0.588V to 0.612V). |
| 2 | GND | power_in | Power ground for the regulator. |
| 3 | VIN | power_in | Power input that supplies the IC and the power MOSFETs; drive with 2.3V to 5.5V and bypass to GND with a suitably large capacitor. |
| 4 | SW | output | Power switching output node that supplies power to the output; connect the output LC filter from SW to the load. |
| 5 | EN | input | Digital enable input: drive high to turn the regulator on (EN logic high threshold typ. 0.91V) and low to turn it off (logic low threshold typ. 0.83V). |
| 6 | OUT | power_out | Output voltage power rail connected to the output load; it cannot be tied to GND and may be left floating only if feed-forward capacitor C3 is used as shown in Figure 2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DIODES INCORPORATED |
| Package | SOT-563 |
| Category | Global Sourcing Parts |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Power-on Reset Rising Threshold | POR | 2 | 2.25 | V | 5 | ||
| HS Peak Current Limit | IPEAK_LIMIT | 2.4 | 3.2 | A | From Source to Drain | 5 | |
| Feedback Voltage | VFB | 0.588 | 0.6 | 0.612 | V | CCM | 5 |
| Supply Voltage | VIN | 2.3 | 5.5 | V | 4 | ||
| Output Voltage | VOUT | 0.6 | 3.6 | V | 4 | ||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 4 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 4 | ||
| VIN Supply Pin Voltage | VIN | -0.3 | 6.5 | V | DC | 4 | |
| VIN Supply Pin Voltage | VIN | -0.3 | 7 | V | 400ms | 4 | |
| Feedback Pin Voltage | VFB | -0.3 | V | upper limit VIN + 0.3 | 4 | ||
| Switch Pin Voltage | VSW | -1 | V | DC; upper limit VIN + 0.3 | 4 | ||
| Switch Pin Voltage | VSW | -2.5 | V | 20ns; upper limit VIN + 2.0 | 4 | ||
| Enable Pin Voltage | VEN | -0.3 | V | upper limit VIN + 0.3 | 4 | ||
| Output Pin Voltage (AP61200/AP61201) | VOUT | -0.3 | 6 | V | DC | 4 | |
| Storage Temperature | TST | -65 | 150 | °C | 4 | ||
| Junction Temperature | TJ | 160 | °C | 4 | |||
| Lead Temperature | TL | 260 | °C | 4 | |||
| ESD Susceptibility Human Body Model | HBM | -2000 | 2000 | V | 4 | ||
| ESD Susceptibility Charged Device Model | CDM | -1000 | 1000 | V | 4 | ||
| Junction to Ambient SOT563 | θJA | 141 | °C/W | Note 6: FR-4 two-layer PCB, 2oz copper, min recommended pad layout | 4 | ||
| Junction to Case SOT563 | θJC | 33 | °C/W | Note 6: FR-4 two-layer PCB, 2oz copper, min recommended pad layout | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.003 grams (Approximate) | 20 |
CAD (KiCad official)
- Symbol:
AP61200Z6-7 - Footprint:
Package_TO_SOT_SMD:SOT-563 - 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files:
ap61200z6-7-etched.step/ap61200z6-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap61200z6-7.step/ap61200z6-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: DIODES INCORPORATED datasheet (21 pp, sha256
31486781dec3e493, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AP61200Z6-7
**DIODES INCORPORATED** · Global Sourcing Parts · SOT-563
AP61200Z6-7 from DIODES INCORPORATED, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback sensing terminal for the output voltage; connect it to the resistive divider of the output (0.6V reference, VFB 0.588V to 0.612V). |
| 2 | GND | power_in | Power ground for the regulator. |
| 3 | VIN | power_in | Power input that supplies the IC and the power MOSFETs; drive with 2.3V to 5.5V and bypass to GND with a suitably large capacitor. |
| 4 | SW | output | Power switching output node that supplies power to the output; connect the output LC filter from SW to the load. |
| 5 | EN | input | Digital enable input: drive high to turn the regulator on (EN logic high threshold typ. 0.91V) and low to turn it off (logic low threshold typ. 0.83V). |
| 6 | OUT | power_out | Output voltage power rail connected to the output load; it cannot be tied to GND and may be left floating only if feed-forward capacitor C3 is used as shown in Figure 2. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | DIODES INCORPORATED |
| Package | SOT-563 |
| Category | Global Sourcing Parts |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Power-on Reset Rising Threshold | POR | | 2 | 2.25 | V | | 5 |
| HS Peak Current Limit | IPEAK_LIMIT | 2.4 | 3.2 | | A | From Source to Drain | 5 |
| Feedback Voltage | VFB | 0.588 | 0.6 | 0.612 | V | CCM | 5 |
| Supply Voltage | VIN | 2.3 | | 5.5 | V | | 4 |
| Output Voltage | VOUT | 0.6 | | 3.6 | V | | 4 |
| Operating Ambient Temperature | TA | -40 | | 85 | °C | | 4 |
| Operating Junction Temperature | TJ | -40 | | 125 | °C | | 4 |
| VIN Supply Pin Voltage | VIN | -0.3 | | 6.5 | V | DC | 4 |
| VIN Supply Pin Voltage | VIN | -0.3 | | 7 | V | 400ms | 4 |
| Feedback Pin Voltage | VFB | -0.3 | | | V | upper limit VIN + 0.3 | 4 |
| Switch Pin Voltage | VSW | -1 | | | V | DC; upper limit VIN + 0.3 | 4 |
| Switch Pin Voltage | VSW | -2.5 | | | V | 20ns; upper limit VIN + 2.0 | 4 |
| Enable Pin Voltage | VEN | -0.3 | | | V | upper limit VIN + 0.3 | 4 |
| Output Pin Voltage (AP61200/AP61201) | VOUT | -0.3 | | 6 | V | DC | 4 |
| Storage Temperature | TST | -65 | | 150 | °C | | 4 |
| Junction Temperature | TJ | | | 160 | °C | | 4 |
| Lead Temperature | TL | | | 260 | °C | | 4 |
| ESD Susceptibility Human Body Model | HBM | -2000 | | 2000 | V | | 4 |
| ESD Susceptibility Charged Device Model | CDM | -1000 | | 1000 | V | | 4 |
| Junction to Ambient SOT563 | θJA | | 141 | | °C/W | Note 6: FR-4 two-layer PCB, 2oz copper, min recommended pad layout | 4 |
| Junction to Case SOT563 | θJC | | 33 | | °C/W | Note 6: FR-4 two-layer PCB, 2oz copper, min recommended pad layout | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.003 grams (Approximate) | 20 |
## CAD (KiCad official)
- Symbol: `AP61200Z6-7`
- Footprint: `Package_TO_SOT_SMD:SOT-563`
- 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files: `ap61200z6-7-etched.step` / `ap61200z6-7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap61200z6-7.step` / `ap61200z6-7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [DIODES INCORPORATED datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590908671599583232) (21 pp, sha256 `31486781dec3e493`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ap61200z6-7-datasheet.pdf)