component
AP61102Z6-7
Public Made by Adomby adom
Diodes Incorporated DC-DC Converters, SOT-563. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 16d ago |
| viewers | 16d ago |
| ap61102z6-7-etched.glb | 16d ago |
| ap61102z6-7-etched.step | 16d ago |
| ap61102z6-7-hero.glb | 16d ago |
| ap61102z6-7-hero.overlay.json | 16d ago |
| ap61102z6-7.glb | 16d ago |
| ap61102z6-7.kicad_mod | 16d ago |
| ap61102z6-7.kicad_sym | 16d ago |
| ap61102z6-7.lbr | 16d ago |
| ap61102z6-7.step | 16d ago |
| package.json | 16d ago |
| page.json | 16d ago |
| README.md | 16d ago |
AP61102Z6-7
Diodes Incorporated · DC-DC Converters · SOT-563
AP61102Z6-7 from Diodes Incorporated, in a SOT-563. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback sensing terminal for the output voltage; connect it to the output resistive divider (the reference is 0.6V). |
| 2 | GND | power_in | Power ground. |
| 3 | VIN | power_in | Power input for the IC and the step-down power MOSFETs; drive with a 2.3V to 5.5V source and bypass to GND with a suitably large capacitor. |
| 4 | SW | output | Power switching output that supplies power to the output; connect the output LC filter from SW to the load. |
| 5 | EN | input | Digital enable input: high turns the regulator on and low turns it off (logic high typ. 0.91V rising, logic low typ. 0.83V falling), and it also selects PFM or PWM operation mode. |
| 6 | PG | output | Open-drain power-good output that is pulled to GND when the output is outside its regulation limits or during soft-start (AP61102 variant; pin 6 is OUT on the AP61100). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-563 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Power-on Reset Rising Threshold | POR | 2 | 2.25 | V | 6 | ||
| HS Peak Current Limit | IPEAK_LIMIT | 1.7 | 2.5 | A | From Source to Drain | 6 | |
| Oscillator Frequency | fSW | 1.7 | 2.2 | 2.7 | MHz | VOUT = 1.8V, CCM | 6 |
| Feedback Voltage | VFB | 0.588 | 0.6 | 0.612 | V | CCM | 6 |
| Power-Good Output Logic Low | VPG_OL | 0.4 | V | AP61102, IPG = -1mA | 6 | ||
| VIN Supply Pin Voltage (DC) | VIN | -0.3 | 6.5 | V | DC | 5 | |
| VIN Supply Pin Voltage (400ms) | VIN | -0.3 | 7 | V | 400ms | 5 | |
| Feedback Pin Voltage | VFB | -0.3 | V | Upper limit printed as VIN + 0.3 V; not numeric | 5 | ||
| Switch Pin Voltage (DC) | VSW | -1 | V | DC; upper limit printed as VIN + 0.3 V | 5 | ||
| Switch Pin Voltage (20ns) | VSW | -2.5 | V | 20ns; upper limit printed as VIN + 2.0 V | 5 | ||
| Enable Pin Voltage | VEN | -0.3 | V | Upper limit printed as VIN + 0.3 V; not numeric | 5 | ||
| Power-Good Pin Voltage (AP61102) | VPG | -0.3 | 6 | V | DC | 5 | |
| Storage Temperature | TST | -65 | 150 | °C | 5 | ||
| Junction Temperature | TJ | 160 | °C | 5 | |||
| Lead Temperature | TL | 260 | °C | 5 | |||
| ESD Human Body Model | HBM | -6000 | 6000 | V | Human Body Model | 5 | |
| ESD Charged Device Model | CDM | -1500 | 1500 | V | Charged Device Model | 5 | |
| Supply Voltage | VIN | 2.3 | 5.5 | V | 5 | ||
| Output Voltage | VOUT | 0.6 | 3.6 | V | 5 | ||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 5 | ||
| Operating Junction Temperature | TJ | -40 | 125 | °C | 5 | ||
| Junction to Ambient Thermal Resistance (SOT563) | θJA | 141 | °C/W | FR-4 two-layer PCB, 2oz copper, minimum recommended pad layout (Note 6) | 5 | ||
| Junction to Case Thermal Resistance (SOT563) | θJC | 33 | °C/W | FR-4 two-layer PCB, 2oz copper, minimum recommended pad layout (Note 6) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.003 grams (Approximate) | 21 |
CAD (KiCad official)
- Symbol:
AP61102Z6-7 - Footprint:
Package_TO_SOT_SMD:SOT-563 - 3D model: SOT-563 (KiCad packages3D, STEP)
- 3D model files:
ap61102z6-7-etched.step/ap61102z6-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap61102z6-7.step/ap61102z6-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (22 pp, sha256
f759bf71b09cf7cb, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).