AP5054BES5

{
  "slug": "ap5054bes5",
  "version": "0.1.0",
  "type": "component",
  "description": "Wuxi Chipown Micro electronics Battery Management, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ap5054bes5",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap5054bes5.kicad_sym",
    "ap5054bes5.kicad_mod",
    "ap5054bes5.glb",
    "ap5054bes5.step",
    "ap5054bes5.lbr",
    "docs/hero.png",
    "docs/ap5054bes5-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap5054bes5-hero.glb",
    "ap5054bes5-hero.overlay.json",
    "ap5054bes5-etched.glb"
  ],
  "component": {
    "mpn": "AP5054BES5",
    "manufacturer": "Wuxi Chipown Micro electronics",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586199846479417344",
    "parts": {
      "symbol": "ap5054bes5.kicad_sym",
      "footprint": "ap5054bes5.kicad_mod",
      "model_3d": "ap5054bes5-hero.glb",
      "model_3d_plain": "ap5054bes5-etched.glb",
      "model_3d_step": "ap5054bes5-etched.step",
      "model_3d_step_plain": "ap5054bes5.step",
      "lbr": "ap5054bes5.lbr"
    },
    "distributor_links": {
      "lcsc": "C98153"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T20:51:43Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CHRG",
        "type": "output",
        "description": "Open-drain charge status output that an internal N-channel MOSFET pulls low while charging and that goes high-impedance when the charge cycle completes or under-voltage lockout is active; with Ichrg = 5 mA the low-level output voltage is 0.68 V to 0.8 V (ICHRG vs VCHRG curve in datasheet, absolute maximum VSS-0.3 to VSS+7 V)."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Power ground reference pin for the charger (datasheet specifies it only as the power ground)."
      },
      {
        "number": "3",
        "name": "BAT",
        "type": "power_out",
        "description": "Battery connection that supplies the charge current and regulates the final float voltage to 4.2 V through an internal precision resistor divider; absolute maximum voltage is VSS-0.3 to VSS+7 V and the pin is disconnected in shutdown mode."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive input supply for the charger with an operating range of 4.25 V to 6.5 V (absolute maximum VSS+7 V), which requires a decoupling capacitor of at least 1 uF; the charger enters shutdown mode when VCC minus VBAT is below 30 mV."
      },
      {
        "number": "5",
        "name": "PROG",
        "type": "bidirectional",
        "description": "Charge current program, monitor and shutdown pin: a 1% external resistor to GND sets the charge current via IBAT = (VPROG/RPROG) x 1000, with VPROG regulated at 1 V in constant-current mode, shutdown triggered at a 1.21 V threshold, and the pin clamped at about 2.4 V (absolute maximum VCC+0.3 V)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types are KiCad-class interpretations, not printed in the datasheet: CHRG is an open-drain outpu; The datasheet is in Chinese; descriptions are translated into English from the pin table on page 2 a; Page 2 lists the same five pins in a short table; the detailed limits come from page 7 and the elect"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0374,
        "at": "2026-10-18T20:49:18"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586199846479417344",
        "pages": 10,
        "sha256": "881fd2bc367ce214",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ap5054bes5.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap5054bes5-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0eacd6ca9d6d671fc3c9e1b048c4d48ba46c4986c903a08856f3b6cf2729951b",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}