component

AP4310AMTR-G1

Public Made by Adom

by adom

Diodes Incorporated Operational Amplifier, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmpap4310amtr-g1
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ap4310amtr-g1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
ap4310amtr-g1-etched.fit.json ap4310amtr-g1: one-pass backfill (re-etched) · Ray
ap4310amtr-g1-etched.glb ap4310amtr-g1: one-pass backfill (re-etched) · Ray
ap4310amtr-g1-etched.step ap4310amtr-g1: one-pass backfill (re-etched) · Ray
ap4310amtr-g1-hero.glb Publish 0.2.1 · Ray
ap4310amtr-g1-hero.overlay.json Publish 0.2.1 · Ray
ap4310amtr-g1.glb Publish 0.1.0 · Ray
ap4310amtr-g1.kicad_mod Publish 0.1.0 · Ray
ap4310amtr-g1.kicad_sym Publish 0.1.0 · Ray
ap4310amtr-g1.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
ap4310amtr-g1.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json Publish 0.2.1 · Ray
README.md ap4310amtr-g1: specified limits as data (metadata.characteristics, 44 rows from the datasheet) · Ray

AP4310AMTR-G1

Diodes Incorporated · Operational Amplifier · SOP-8

AP4310AMTR-G1 from Diodes Incorporated, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTPUT1 output Op Amp 1 output. Source/sink capability typ 40mA / 20mA at VCC=15V. Output swing 0 to VCC-1.5V; slew rate ~0.5 V/us; unity-gain bandwidth ~1 MHz.
2 INPUT1- input Op Amp 1 inverting input. Input bias current typ 20nA (max 150nA). Input voltage range -0.3 to VCC+0.3V (absolute max).
3 INPUT1+/VKA input Op Amp 1 non-inverting input, internally connected to the cathode of the 2.5V shunt voltage reference (VKA). Also serves as the reference output node; typical VREF=2.5V ±0.4%, cathode current 0.05 to 80mA, dynamic impedance ~0.2 ohm.
4 GND power_in Device ground / shunt regulator anode return.
5 INPUT2+ input Op Amp 2 non-inverting input (uncommitted, for current control). Input voltage range 0 to VCC-1.5V; input bias current typ 20nA.
6 INPUT2- input Op Amp 2 inverting input (uncommitted). Input bias current typ 20nA (max 150nA); input offset current typ 2nA.
7 OUTPUT2 output Op Amp 2 output. Source/sink typ 40mA / 20mA at VCC=15V. Output swing 0 to VCC-1.5V; slew rate ~0.5 V/us; unity-gain bandwidth ~1 MHz.
8 VCC power_in Positive supply voltage. Operating range 3V to 36V; absolute max 40V. Total quiescent current (excluding reference) ~0.15mA at 5V, ~0.20mA at 30V.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

  • AP4310AMTR-G1
  • AP4310AMTR-G1AM-G1

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Total Supply Current, excluding Current in Voltage Reference 0.15 0.25 mA VCC=5V, no load, -40°C ≤ TA ≤ +105°C 3
Total Supply Current, excluding Current in Voltage Reference 0.2 0.3 mA VCC=30V, no load, -40°C ≤ TA ≤ +105°C 3
Reference Voltage 2.49 2.5 2.51 V IK=10mA, TA = +25°C 3
Reference Voltage 2.48 2.5 2.52 V IK=10mA, -40°C ≤ TA ≤ +105°C 3
Reference Voltage Deviation over Full Temperature Range 5 24 mV IK=10mA, TA= -40°C to +105°C 3
Minimum Cathode Current for Regulation 0.01 0.05 mA 3
Dynamic Impedance 0.2 0.5 Ω IK=1mA to 80mA, f<1kHz 3
Reference Voltage Tolerance -0.4 0.4 % 1
Input Offset Voltage (Op Amp 1) 0.5 3 mV TA = +25°C 3
Input Offset Voltage (Op Amp 1) 5 mV TA = -40°C to +105°C 3
Input Bias Current (Inverting Input Only, Op Amp 1) 20 150 nA TA = +25°C 3
Large Signal Voltage Gain (Op Amp 1) 85 100 dB VCC = 15V, RL = 2kΩ, VO = 1.4V to 11.4V 3
Power Supply Rejection Ratio (Op Amp 1) 70 90 dB VCC = 5V to 30V 3
Output Current Source (Op Amp 1) 20 40 mA VCC = 15V, VID = 1V, VO = 2V 3
Output Current Sink (Op Amp 1) 5 20 mA VCC = 15V, VID = -1V, VO = 2V 3
Output Voltage Swing (High, Op Amp 1) 27 28 V VCC = 30V, RL = 10kΩ, VID = 1V 3
Output Voltage Swing (Low, Op Amp 1) 17 100 mV VCC = 30V, RL = 10kΩ, VID = -1V 3
Slew Rate (Op Amp 1) 0.2 0.5 V/μs VCC = 18V, RL = 2kΩ, AV = 1, VIN = 0.5V to 2V, CL = 100pF 3
Unity Gain Bandwidth (Op Amp 1) 0.7 1 MHz VCC = 30V, RL = 2kΩ, CL = 100pF 3
Input Offset Voltage (Op Amp 2) 0.5 3 mV TA = +25°C 3
Input Offset Voltage (Op Amp 2) 5 mV TA = -40°C to +105°C 3
Input Offset Current (Op Amp 2) 2 30 nA TA = +25°C 3
Input Bias Current (Op Amp 2) 20 150 nA TA = +25°C 3
Input Voltage Range (Op Amp 2) 0 V VCC = 0 to 36V 3
Common Mode Rejection Ratio (Op Amp 2) 70 85 dB TA = +25°C, VCM = 0 to 3.5V 3
Large Signal Voltage Gain (Op Amp 2) 85 100 dB VCC = 15V, RL = 2kΩ, VO = 1.4V to 11.4V 3
Power Supply Rejection Ratio (Op Amp 2) 70 90 dB VCC = 5V to 30V 3
Output Current Source (Op Amp 2) 20 40 mA VCC = 15V, VID = 1V, VO = 2V 3
Output Current Sink (Op Amp 2) 5 20 mA VCC = 15V, VID = -1V, VO = 2V 3
Output Voltage Swing (High, Op Amp 2) 27 28 V VCC = 30V, RL = 10kΩ, VID = 1V 3
Output Voltage Swing (Low, Op Amp 2) 17 100 mV VCC = 30V, RL = 10kΩ, VID = -1V 3
Slew Rate (Op Amp 2) 0.2 0.5 V/μs VCC = 18V, RL = 2kΩ, AV = 1, VIN = 0.5V to 2V, CL = 100pF 3
Unity Gain Bandwidth (Op Amp 2) 0.7 1 MHz VCC = 30V, RL = 2kΩ, CL = 100pF 3
Power Supply Voltage (VCC to GND) VCC 40 V 2
Op Amp 1 and 2 Input Voltage Range (Pins 2, 5, 6) VIN -0.3 V 2
Op Amp 2 Input Differential Voltage (Pins 5, 6) VID 40 V 2
Voltage Reference Cathode Current (Pin 3) IK 100 mA 2
Power Dissipation PD 500 mW TA = +25°C 2
Operating Junction Temperature TJ 150 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Lead Temperature TLEAD 260 °C Soldering 10sec 2
ESD (Human Body Model) ESD 2000 V 2
Supply Voltage 3 36 V 2
Ambient Temperature -40 105 °C 2

CAD (KiCad official)

  • Symbol: AP4310AMTR-G1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ap4310amtr-g1-etched.step / ap4310amtr-g1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ap4310amtr-g1.step / ap4310amtr-g1.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ap4310amtr-g1.step 122 KB You want the bare part, or you mark your own boards.
ap4310amtr-g1-etched.step 2.2 MB You want the part with AP4310AMTR-G1 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 573 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (8 pp, sha256 11f2529237431886, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF