component
AP4306AKTR-G1
Public Made by Adomby adom
Diodes Incorporated Current Sense Amplifiers, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
AP4306AKTR-G1
Diodes Incorporated · Current Sense Amplifiers · SOT-23-6
AP4306AKTR-G1 from Diodes Incorporated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCTRL | input | Input pin of the voltage control loop, whose internal reference is 1.21 V (A version VREF 1.198 to 1.222 V at 25°C). |
| 2 | GND | power_in | Ground pin for the controller. |
| 3 | VOUT | output | Output pin that sinks current only; datasheet gives VOL of 100 mV at 10 mA sink and IOS of 27 mA typical (50 mA max) at 25°C. |
| 4 | ICTRL | input | Input pin of the current control loop; the datasheet gives an input current out of ICTRL at VSENSE of 18 µA typical at 25°C (A version). |
| 5 | VSENSE | input | Input pin of the current control loop, with the A version current-sense reference of 70 mV (63 to 77 mV over -40°C to +105°C). |
| 6 | VCC | power_in | Power supply pin; recommended operating supply range is 2.5 V to 18 V and the absolute maximum is 20 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Total Supply Current | ICC | 0.5 | 1 | mA | VCC=5V; Not including the output sinking; TA=+25oC | 5 | |
| Transconduction Gain (VCTRL), sink current only | Gmv | 1 | 3.5 | mA/mV | VCC=5V; Sink current only; TA=+25oC | 5 | |
| VREF Voltage Control Loop Reference, A Version | VREF | 1.198 | 1.21 | 1.222 | V | VCC=5V; A Version; TA=+25oC | 5 |
| VREF Voltage Control Loop Reference, A Version | VREF | 1.162 | 1.258 | V | VCC=5V; A Version; -40oC<TA<+105oC | 5 | |
| Transconduction Gain (ICTRL), sink current only | Gmi | 1.5 | 7 | mA/mV | VCC=5V; Sink current only; TA=+25oC | 5 | |
| VSENSE Current Control Loop Reference, A Version | VSENSE | 66.5 | 70 | 73.5 | mV | VCC=5V; A Version; TA=+25oC | 5 |
| VSENSE Current Control Loop Reference, A Version | VSENSE | 63 | 77 | mV | VCC=5V; A Version; -40oC<TA<+105oC | 5 | |
| Output Short Circuit Current, sink current only | IOS | 27 | 50 | mA | VCC=5V; Output to VCC. Sink current only; TA=+25oC | 5 | |
| Power Supply Voltage | VCC | 20 | V | 4 | |||
| Input Voltage | VIN | -0.3 | V | Printed as -0.3 to VCC | 4 | ||
| Junction Temperature | TJ | 150 | C | 4 | |||
| Storage Temperature | TSTG | -65 | 150 | C | 4 | ||
| Lead Temperature (Soldering) | TLEAD | 260 | C | Soldering, 5sec | 4 | ||
| Thermal Resistance (Junction to Ambient) | θJA | 250 | C/W | Junction to ambient | 4 | ||
| Power Supply Voltage | VCC | 2.5 | 18 | V | 4 | ||
| Operating Temperature Range | TA | -40 | 105 | C | 4 | ||
| Thermal Resistance (Junction to Case) | θJC | 84 | C/W | Junction to case | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per JESD22-B102 Weight: 0.016 grams (Approximate) | 9 |
CAD (KiCad official)
- Symbol:
AP4306AKTR-G1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ap4306aktr-g1-etched.step/ap4306aktr-g1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap4306aktr-g1.step/ap4306aktr-g1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (10 pp, sha256
95160f2f040da36b, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AP4306AKTR-G1
**Diodes Incorporated** · Current Sense Amplifiers · SOT-23-6
AP4306AKTR-G1 from Diodes Incorporated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCTRL | input | Input pin of the voltage control loop, whose internal reference is 1.21 V (A version VREF 1.198 to 1.222 V at 25°C). |
| 2 | GND | power_in | Ground pin for the controller. |
| 3 | VOUT | output | Output pin that sinks current only; datasheet gives VOL of 100 mV at 10 mA sink and IOS of 27 mA typical (50 mA max) at 25°C. |
| 4 | ICTRL | input | Input pin of the current control loop; the datasheet gives an input current out of ICTRL at VSENSE of 18 µA typical at 25°C (A version). |
| 5 | VSENSE | input | Input pin of the current control loop, with the A version current-sense reference of 70 mV (63 to 77 mV over -40°C to +105°C). |
| 6 | VCC | power_in | Power supply pin; recommended operating supply range is 2.5 V to 18 V and the absolute maximum is 20 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Total Supply Current | ICC | | 0.5 | 1 | mA | VCC=5V; Not including the output sinking; TA=+25oC | 5 |
| Transconduction Gain (VCTRL), sink current only | Gmv | 1 | 3.5 | | mA/mV | VCC=5V; Sink current only; TA=+25oC | 5 |
| VREF Voltage Control Loop Reference, A Version | VREF | 1.198 | 1.21 | 1.222 | V | VCC=5V; A Version; TA=+25oC | 5 |
| VREF Voltage Control Loop Reference, A Version | VREF | 1.162 | | 1.258 | V | VCC=5V; A Version; -40oC<TA<+105oC | 5 |
| Transconduction Gain (ICTRL), sink current only | Gmi | 1.5 | 7 | | mA/mV | VCC=5V; Sink current only; TA=+25oC | 5 |
| VSENSE Current Control Loop Reference, A Version | VSENSE | 66.5 | 70 | 73.5 | mV | VCC=5V; A Version; TA=+25oC | 5 |
| VSENSE Current Control Loop Reference, A Version | VSENSE | 63 | | 77 | mV | VCC=5V; A Version; -40oC<TA<+105oC | 5 |
| Output Short Circuit Current, sink current only | IOS | | 27 | 50 | mA | VCC=5V; Output to VCC. Sink current only; TA=+25oC | 5 |
| Power Supply Voltage | VCC | | | 20 | V | | 4 |
| Input Voltage | VIN | -0.3 | | | V | Printed as -0.3 to VCC | 4 |
| Junction Temperature | TJ | | | 150 | C | | 4 |
| Storage Temperature | TSTG | -65 | | 150 | C | | 4 |
| Lead Temperature (Soldering) | TLEAD | | | 260 | C | Soldering, 5sec | 4 |
| Thermal Resistance (Junction to Ambient) | θJA | | 250 | | C/W | Junction to ambient | 4 |
| Power Supply Voltage | VCC | 2.5 | | 18 | V | | 4 |
| Operating Temperature Range | TA | -40 | | 105 | C | | 4 |
| Thermal Resistance (Junction to Case) | θJC | | 84 | | C/W | Junction to case | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per JESD22-B102 Weight: 0.016 grams (Approximate) | 9 |
## CAD (KiCad official)
- Symbol: `AP4306AKTR-G1`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `ap4306aktr-g1-etched.step` / `ap4306aktr-g1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ap4306aktr-g1.step` / `ap4306aktr-g1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8560094544277626880) (10 pp, sha256 `95160f2f040da36b`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ap4306aktr-g1-datasheet.pdf)