Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AP3445LW6-7

Diodes Incorporated · DC-DC Converters · SOT-26

AP3445LW6-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable control input; forcing this pin above 1.5V enables the chip and below 0.4V shuts down the device.
2 GND power_in Ground pin.
3 LX passive Drains of the internal main and synchronous power MOSFETs (switching node, connects to the inductor).
4 VIN power_in Bias supply and main chip power supply pin, operating range 2.7V to 5.5V.
5 PG output Power good indicator, open drain output; pulled up to VIN when the output voltage is within 20% of the regulation level, otherwise low.
6 FB input Feedback voltage input to the internal error amplifier, with a threshold voltage of 0.6V.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOT-26
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VIN 2.7 5.5 V 5
Input UVLO Threshold VUVLO 2.4 2.5 V VIN Rises 5
Shutdown Current ISD 0.1 1 µA VEN = 0V 5
Regulated Feedback Voltage VFB 0.591 0.6 0.609 V 5
FB Leakage Current IFB 0.2 µA VFB = 1V 5
Peak Inductor Current ILIM 2.5 A 5
Oscillator Frequency fOSC 0.8 1 1.2 MHz 5
Maximum Duty Cycle DMAX 100 % 5
EN Threshold High VENH 1.5 V 5
EN Threshold Low VENL 0.4 V 5
EN Leakage Current IEN -1 1 µA VIN= VEN =5V 5
Soft-start Time tSS 0.7 1 1.3 ms 5
Quiescent Current IQ 55 µA VFB = 0.65V 5
Input UVLO Hysteresis VHYS 0.2 V VIN Falls 5
Drain-Source On-State Resistance High Side RDS(ON) 100 mΩ ILX = 100mA High Side 5
Drain-Source On-State Resistance Low Side RDS(ON) 60 mΩ ILX = 100mA Low Side 5
Output Discharge Switch On Resistance RDISCH 50 Ω 5
Short Circuit Protection Latch Off Threshold VSCP 0.42 V AP3445L only 5
Short Circuit Protection Delay Time TDELAY_SCP 30 ms 5
Over Temperature Protection TOTP 150 °C 5
OTP Hysteresis TDTH 20 °C 5
VOUT Over Voltage Protection VOVP 0.72 V AP3445L only 5
VIN Over Voltage Protection VIOVP 6.3 V VIN Rises 5
IOVP Hysteresis VIHSY 0.35 V VIN Falls 5
Supply Voltage (recommended) VIN 2.7 5.5 V 4
Junction Temperature Range TJ -40 125 °C 4
Operating Ambient Temperature TA -40 85 °C 4
Input Voltage (abs max) VIN -0.3 6 V 4
EN Pin Voltage VEN -0.3 V max VIN+0.3 V 4
FB Pin Voltage VFB -0.3 V max VIN+0.3 V 4
LX Pin Voltage VLX -0.3 V max VIN+0.3 V 4
LX Pin Voltage transient VLX -3 V <20ns, max VIN +3 V 4
Power Dissipation PD 0.588 W On PCB, TA = +25°C 4
Operating Junction Temperature TJ 150 °C 4
Storage Temperature TSTG -55 150 °C 4
ESD Human Body Model VHBM 2000 V JESD22-A114 4
ESD Charge Device Model VCDM 1000 V JESD22-C101 4
Thermal Resistance Junction to Ambient θJA 170 °C/W 4
Thermal Resistance Junction to Case θJC 130 °C/W Simulation 4

CAD (KiCad official)

  • Symbol: AP3445LW6-7
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-26 (KiCad packages3D, STEP)
  • 3D model files: ap3445lw6-7-etched.step / ap3445lw6-7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ap3445lw6-7.step / ap3445lw6-7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (13 pp, sha256 8b5053a5e3f8a015, retrieved 2026-10-22, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF