component
AP3012KTR-G1
Public Made by Adomby adom
Diodes Incorporated DC-DC Converters, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownAP3012KTR-G1
Diodes Incorporated · DC-DC Converters · SOT-23-5
AP3012KTR-G1 from Diodes Incorporated, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch pin. Collector of the internal 36V/500mA bipolar NPN power switch; connect the boost inductor and Schottky diode here. Output voltage on this node can go up to 29V but must not exceed the 29V OVP threshold or the device enters shutdown. |
| 2 | GND | power_in | Ground pin. Connect directly to the local ground plane; carries the switch return current so a low-impedance connection is important. |
| 3 | FB | input | Feedback pin. Internally compared to a 1.25V reference; connect an R1/R2 resistor divider from VOUT to set the output voltage per VOUT = 1.25V * (1 + R1/R2). FB pin bias current is ~45nA typ. |
| 4 | SHDN | input | Active-low shutdown pin (bar over SHDN in datasheet). Drive to 1.5V or higher to enable the device (ON); drive to 0.4V or lower to disable (OFF). Absolute max 16V; typical pin bias current ~55uA. |
| 5 | VIN | power_in | Input supply pin. Recommended operating range 2.6V to 16V (absolute max 20V). Must be locally bypassed with a ceramic capacitor close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
AP3012KTR-G1AP3012KTR-G1KTR-E1
CAD (KiCad official)
- Symbol:
AP3012KTR-G1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ap3012ktr-g1-etched.step/ap3012ktr-g1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap3012ktr-g1.step/ap3012ktr-g1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (11 pp, sha256
0c3654b75f5ef3b7, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).