AP2822GKETR-G1

{
  "slug": "ap2822gketr-g1",
  "version": "0.1.0",
  "type": "component",
  "description": "Diodes Incorporated Power Distribution Switches, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "ap2822gketr-g1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ap2822gketr-g1.kicad_sym",
    "ap2822gketr-g1.kicad_mod",
    "ap2822gketr-g1.glb",
    "ap2822gketr-g1.step",
    "ap2822gketr-g1.lbr",
    "docs/hero.png",
    "docs/ap2822gketr-g1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ap2822gketr-g1-hero.glb",
    "ap2822gketr-g1-hero.overlay.json",
    "ap2822gketr-g1-etched.glb"
  ],
  "component": {
    "mpn": "AP2822GKETR-G1",
    "manufacturer": "Diodes Incorporated",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Power Management (PMIC)",
    "subcategory": "Power Distribution Switches",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590912298188435456",
    "parts": {
      "symbol": "ap2822gketr-g1.kicad_sym",
      "footprint": "ap2822gketr-g1.kicad_mod",
      "model_3d": "ap2822gketr-g1-hero.glb",
      "model_3d_plain": "ap2822gketr-g1-etched.glb",
      "model_3d_step": "ap2822gketr-g1-etched.step",
      "model_3d_step_plain": "ap2822gketr-g1.step",
      "lbr": "ap2822gketr-g1.lbr"
    },
    "distributor_links": {
      "lcsc": "C460659"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T11:19:01Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VOUT",
        "type": "power_out",
        "description": "High-side switch output to the load; the internal N-channel MOSFET (85 mΩ typical RDS(ON) at VIN = 5.0 V) is rated for 2.0 A continuous load in this G variant."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the device."
      },
      {
        "number": "3",
        "name": "FLAG",
        "type": "output",
        "description": "Fault flag open-drain output, active low to indicate over-current or over-temperature conditions; requires an external pull-up resistor."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Chip enable control input, active high for this variant (AP2822G); enable high threshold is 1.6 V minimum and enable low threshold is 1.0 V maximum, with input limits of 5.5 V."
      },
      {
        "number": "5",
        "name": "VIN",
        "type": "power_in",
        "description": "Supply input pin; operating supply range is 2.7 V to 5.5 V, with UVLO threshold of 2.2 V to 3.0 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The KE pin map was derived from the functional block diagram superscripts (page 3) and cross-checked; Pin types are inferred from function (open-drain FLAG as output, VOUT as power output). The datashee"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0809,
        "at": "2026-10-18T11:16:58"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590912298188435456",
        "pages": 16,
        "sha256": "960a517ff85deff1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ap2822gketr-g1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ap2822gketr-g1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6f57edfc0de0abec2b8c57d35d63481fddcc373be6433851bc2bd2bdcb1a9dc7",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}