component
AP22908W6-7
Public Made by Adomby adom
Diodes Incorporated Power Distribution Switches, SOT-26. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAP22908W6-7
Diodes Incorporated · Power Distribution Switches · SOT-26
AP22908W6-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Voltage output pin, connected to the P-channel MOSFET drain; bypass to ground through a 0.1µF to 1µF capacitor. |
| 2 | GND | power_in | Ground pin. |
| 3 | ON | input | Active-high enable input; VIH must be at least 0.9V and VIL must not exceed 0.38V for the switch to turn on and off reliably. |
| 4 | VIN | power_in | Voltage input pin, connected to the P-channel MOSFET source; operating input voltage range is 1.08V to 3.6V and it should be bypassed to ground through a 1µF capacitor. |
| 5 | GND | power_in | Ground pin. |
| 6 | VIN | power_in | Voltage input pin, connected to the P-channel MOSFET source; operating input voltage range is 1.08V to 3.6V and it should be bypassed to ground through a 1µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-26 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 1.08 | 3.6 | V | 3 | ||
| ON Voltage Range | VON | 0 | 3.6 | V | 3 | ||
| Output Voltage | VOUT | 0 | 3.6 | V | 3 | ||
| Output Current | IOUT | 0 | 1.5 | A | 3 | ||
| ON High-Level Input Voltage | VIH | 0.9 | 3.6 | V | 3 | ||
| ON Low-Level Input Voltage | VIL | 0 | 0.38 | V | 3 | ||
| Operating Ambient Temperature | TA | -40 | 85 | °C | 3 | ||
| Input Voltage | VIN | -0.3 | 4 | V | 3 | ||
| Output Voltage | VOUT | -0.3 | 4 | V | 3 | ||
| ON Voltage | VON | -0.3 | 4 | V | 3 | ||
| Maximum Continuous Output Current | IOUT | 1.5 | A | VIN ≥ 1.2V | 3 | ||
| Maximum Pulse Output Current | IOUT | 2.5 | A | Pulse <300µs, 2% Duty Cycle | 3 | ||
| Maximum Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 3 | ||
| ESD HBM Human Body Model ESD Protection | ESD HBM | 2 | kV | 3 | |||
| ESD CDM Charged Device Model ESD Protection | ESD CDM | 1 | kV | 3 | |||
| Power Dissipation | PD | 606 | mW | SOT26 package | 3 | ||
| Thermal Resistance, Junction to Ambient | RθJA | 165 | °C/W | SOT26 package | 3 | ||
| Thermal Resistance, Junction to Case | RθJC | 30 | °C/W | SOT26 package | 3 | ||
| Input Quiescent Current | IQ | 0.05 | 1 | μA | IOUT = 0mA, VON = VIN(Enabled), TA = -40ºC to +85ºC | 4 | |
| Input Shutdown Current | ISHDN | 0.04 | 0.5 | μA | RL = 1MΩ, VON = Disabled, TA = -40ºC to +85ºC | 4 | |
| Input Leakage Current | IIN_LEAK | 0.04 | 0.5 | μA | VOUT = 0V, VON = Disabled, TA = -40ºC to +85ºC | 4 | |
| ON Input leakage | ION | 0.01 | 0.1 | μA | VON = 1.1V to 3.6V or VON = VIN, TA = -40ºC to +85ºC | 4 | |
| Switch On-Resistance (SOT26) | RDS(ON) | 40 | 43 | mΩ | IOUT = -200mA, VIN = 3.6V, TA = +25°C | 4 | |
| Switch On-Resistance (SOT26) | RDS(ON) | 55 | mΩ | IOUT = -200mA, VIN = 3.6V, TA = -40ºC to +85ºC | 4 | ||
| Switch On-Resistance (SOT26) | RDS(ON) | 45 | 49 | mΩ | IOUT = -200mA, VIN = 2.5V, TA = +25°C | 4 | |
| Switch On-Resistance (SOT26) | RDS(ON) | 59 | mΩ | IOUT = -200mA, VIN = 2.5V, TA = -40ºC to +85ºC | 4 | ||
| Switch On-Resistance (SOT26) | RDS(ON) | 53 | 62 | mΩ | IOUT = -200mA, VIN = 1.8V, TA = +25°C | 4 | |
| Switch On-Resistance (SOT26) | RDS(ON) | 69 | mΩ | IOUT = -200mA, VIN = 1.8V, TA = -40ºC to +85ºC | 4 | ||
| Switch On-Resistance (SOT26) | RDS(ON) | 91 | 110 | mΩ | IOUT = -200mA, VIN = 1.2V, TA = +25°C | 4 | |
| Switch On-Resistance (SOT26) | RDS(ON) | 120 | mΩ | IOUT = -200mA, VIN = 1.2V, TA = -40ºC to +85ºC | 4 | ||
| Switch On-Resistance (SOT26) | RDS(ON) | 120 | 175 | mΩ | IOUT = -200mA, VIN = 1.08V, TA = +25°C | 4 | |
| Switch On-Resistance (SOT26) | RDS(ON) | 185 | mΩ | IOUT = -200mA, VIN = 1.08V, TA = -40ºC to +85ºC | 4 | ||
| Discharge FET On-Resistance | RDIS | 80 | 100 | Ω | VIN = 3.3V, VON = 0V, IOUT = 30mA, TA = +25°C | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.001 grams (Approximate) | 18 |
CAD (KiCad official)
- Symbol:
AP22908W6-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-26 (KiCad packages3D, STEP)
- 3D model files:
ap22908w6-7-etched.step/ap22908w6-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap22908w6-7.step/ap22908w6-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (19 pp, sha256
ca7f532758c40e62, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).