component
AP22816AKAWT-7
Public Made by Adomby adom
Diodes Incorporated Power Distribution Switches, TSOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| ap22816akawt-7-etched.glb | 7d ago |
| ap22816akawt-7-etched.step | 7d ago |
| ap22816akawt-7-hero.glb | 7d ago |
| ap22816akawt-7-hero.overlay.json | 7d ago |
| ap22816akawt-7.glb | 7d ago |
| ap22816akawt-7.kicad_mod | 7d ago |
| ap22816akawt-7.kicad_sym | 7d ago |
| ap22816akawt-7.lbr | 7d ago |
| ap22816akawt-7.step | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
AP22816AKAWT-7
Diodes Incorporated · Power Distribution Switches · TSOT-23-5
AP22816AKAWT-7 from Diodes Incorporated, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Logic-level enable input for the A (active-high) version: VIL is 0.5 V max and VIH is 1.5 V min (up to VIN), and the pin should not be left floating. |
| 2 | GND | power_in | Ground pin of the circuitry. |
| 3 | FLG | output | Open-drain fault flag that goes active-low after a nominal 6 ms deglitch when an overcurrent or overtemperature shutdown occurs, and stays low until both conditions are removed. |
| 4 | IN | power_in | Voltage input pin; connect a 1 µF low-ESR capacitor to GND close to the IC, with VIN specified from 2.7 V to 5.5 V. |
| 5 | OUT | power_out | Voltage output pin; connect a 0.1 µF bypass capacitor and a high-value capacitor to GND close to the IC (at least 10 µF in USB applications). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TSOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input UVLO | VUVLO | 1.8 | 2.3 | 2.6 | V | VIN Rising | 4 |
| Input Shutdown Current | ISHDN | 0.1 | 1 | µA | Disabled, OUT = Open | 4 | |
| Input Leakage Current | ILEAK | 0.1 | 1 | µA | Disabled, OUT Grounded | 4 | |
| Reverse Leakage Current | IREV | 0.01 | 1 | µA | Disabled, VIN = 0V, VOUT = 5V, IREV at VIN | 4 | |
| Switch On-Resistance | RDS(ON) | 75 | 95 | mΩ | VIN = 5V, IOUT = 1A TA = +25°C | 4 | |
| Over Load Current Limit (AP22816) | ILIMIT | 1.1 | 1.5 | 2.1 | A | VIN = 5V, VOUT = 4.5V(AP22816) | 4 |
| EN/EN Input Logic Low Voltage | VIL | 0.5 | V | VIN = 2.7V to 5.5V | 4 | ||
| EN/EN Input Logic High Voltage | VIH | 1.5 | V | VIN = 2.7V to 5.5V | 4 | ||
| EN/EN Input Leakage | ILEAK-EN/EN | 0.01 | 1 | µA | VIN = 5V, VEN/EN = 0V and 5.5V | 4 | |
| Output Leakage Current | ILEAK-O | 0.5 | 1 | µA | Disabled, VOUT = 0V | 4 | |
| Output Turn-On Rise Time | tR | 1 | 2.1 | 3.5 | ms | CL = 4.7µF, RLOAD = 10Ω @ VIN = 3.3V Figure 1 | 4 |
| FLG Output FET On-Resistance | RFLG | 30 | 60 | Ω | IFLG = 10mA | 4 | |
| FLG Off Current | IFOH | 0.01 | 1 | µA | VFLG = 5V | 4 | |
| FLG Blanking Time | tBLANK | 2 | 5 | 15 | ms | Assertion or deassertion due to overcurrent and overtemperature condition | 4 |
| Discharge Resistance | RDIS | 140 | 200 | Ω | VIN = 5V, Disabled, IOUT = 1mA | 4 | |
| Reverse-Voltage Comparator Trip Point | VRVP | 35 | 70 | 105 | mV | VOUT - VIN | 4 |
| Time from Reverse-Voltage Condition to MOSFET Turn off | tTRIG | 2 | 5 | 15 | ms | VIN | 4 |
| Input Voltage | VIN | 2.7 | 5.5 | V | 3 | ||
| Output Current | IOUT | 0 | 1 | A | AP22816 | 3 | |
| EN/EN Input Logic Low Voltage | VIL | 0 | 0.5 | V | 3 | ||
| EN/EN Input Logic High Voltage | VIH | 1.5 | V | 3 | |||
| Operating Ambient Temperature | TA | -40 | 85 | C | 3 | ||
| Human Body ESD Protection | ESD | 2000 | V | 3 | |||
| Charged Device Model ESD Protection | ESD | 500 | V | 3 | |||
| IEC System Level Surge | 15 | kV | Surges per IEC61000-4-2; applied to output terminals of EVM (Note 6) | 3 | |||
| Input Voltage | VIN | -0.3 | 6 | V | 3 | ||
| Output Voltage | VOUT | -0.3 | V | 3 | |||
| Enable Voltage | VEN/EN | -0.3 | V | 3 | |||
| Maximum Junction Temperature | TJ(max) | 150 | °C | 3 | |||
| Storage Temperature | TST | -65 | 150 | °C | 3 | ||
| Thermal Resistance, Junction to Ambient | RθJA | 123 | °C/W | TSOT25 (Note 6, 7) | 3 | ||
| Thermal Resistance, Junction to Case | RθJC | 32 | °C/W | TSOT25 (Note 6, 7) | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: TSOT-25: Finish, Matte Tin Plated Leads, Solderable per | 1 |
CAD (KiCad official)
- Symbol:
AP22816AKAWT-7 - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ap22816akawt-7-etched.step/ap22816akawt-7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap22816akawt-7.step/ap22816akawt-7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (17 pp, sha256
288a4b503a5a9423, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).