AP22653W6-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	IN	power_in	Input pin; connect a 0.1µF or greater ceramic capacitor from IN to GND as close to the IC as possible, with VIN specified from 3V to 5.5V.
2	GND	power_in	Ground pin; the datasheet's external exposed-pad connection note applies to the W-DFN2020-6 package, not to SOT26.
3	EN	input	Enable input for the active-high AP22653W6-7 variant; logic high turns on the power switch, with VIH of 1.5V to VIN and VIL of 0V to 0.4V.
4	FAULT	output	Active-low open-drain output, asserted during overcurrent, overtemperature, or reverse-voltage conditions, with continuous sink current limited to 0 to 10 mA.
5	ILIM	output	Use an external resistor to set the current-limit threshold; recommended 10kΩ ≦ RLIM ≦ 210kΩ (1% tolerance).
6	OUT	power_out	Voltage output pin; connect a 0.1µF bypass capacitor and a high-value capacitor to GND close to the IC (at least 10µF in USB applications).

Key specifications

Parameter	Value
Manufacturer	Diodes Incorporated
Package	SOT-26
Category	PMIC
Pins	6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Operating Ambient Temperature	TA	-40		85	°C		4
Input Voltage	VIN	3		5.5	V		4
Continuous Output Current	IOUT	0		2.1	A	-40°C ≤ TA ≤ +85°C	4
Enable Voltage	VEN	0		5.5	V		4
High-Level Input Voltage on EN or EN	VIH	1.5			V		4
Low-Level Input Voltage on EN or EN	VIL	0		0.4	V		4
Current-Limit Threshold Resistor Range	RLIM	10		210	kΩ	1% Initial Tolerance	4
Continuous FAULT Sink Current	IO	0		10	mA		4
Input De-Coupling Capacitance, IN to GND		0.1			µF		4
Operating Junction Temperature	TJ	-40		125	°C		4
Voltage on IN, OUT, FAULT, ILIM, EN, EN	VIN, VOUT, VFAULT, VILIM, VEN	-0.3		6	V		4
Continuous FAULT Sink Current				25	mA		4
ILIM Source Current				1	mA		4
Maximum Junction Temperature	TJ(MAX)	-40		150	°C		4
Storage Temperature Range	TSTG	-65		150	°C		4
HBM Human Body Model ESD Protection				2	kV		4
CDM Charged Device Model ESD Protection				500	V		4
IEC System Level Surge				15	kV	Per IEC61000-4-2, applied to output terminals of EVM (Note 6)	4
Thermal Resistance Junction-to-Ambient, SOT26	θJA		120		°C/W	High-K board (Note 7)	4
Thermal Resistance Junction-to-Case, SOT26	θJC		35		°C/W	High-K board (Note 7)	4
Input UVLO Threshold, VIN Rising	VUVLO		2.65	2.95	V	VIN Rising	5
Input Shutdown Current	ISHDN		0.1	1	µA	VIN = 5.5V, Disabled, OUT = Open	5
Input Quiescent Current	IQ		140	160	µA	VIN = 5.5V, Enabled, OUT = Open, RLIM = 20kΩ	5
Input Quiescent Current	IQ		120	140	µA	VIN = 5.5V, Enabled, OUT = Open, RLIM = 210kΩ	5
Reverse Leakage Current	IREV		0.01	1	µA	Disabled, VIN = 0, VOUT = 5.5V, IREV at VIN	5
Switch On-Resistance, SOT26	RDS(ON)		65	90	mΩ	TJ = +25°C, VIN = 5.0V	5
Switch On-Resistance, SOT26	RDS(ON)			135	mΩ	-40°C ≤ TA ≤ +85°C	5
Output Turn-On Rise Time	tR		0.5	1.5	ms	VIN = 5.5V, CL = 1µF, RLOAD = 100Ω. See Figure 1	5
Output Turn-On Rise Time	tR		0.3	1	ms	VIN = 3.0V, CL = 1µF, RLOAD = 100Ω	5
Output Turn-Off Fall Time	tF	0.1		0.5	ms	VIN = 5.5V, CL = 1µF, RLOAD = 100Ω. See Figure 1	5
Current-Limit Threshold (Maximum DC Output Current)	ILIMIT	2478	2665	2852	mA	VIN = 5V, VOUT = 4.5V, RLIM = 10kΩ, TA = +25°C	5
Current-Limit Threshold (Maximum DC Output Current)	ILIMIT	2398	2665	2931	mA	VIN = 5V, VOUT = 4.5V, RLIM = 10kΩ, -40°C ≤ TA ≤ +85°C	5
Current-Limit Threshold (Maximum DC Output Current)	ILIMIT	1614	1735	1856	mA	VIN = 5V, VOUT = 4.5V, RLIM = 15kΩ, TA = +25°C	5
Current-Limit Threshold (Maximum DC Output Current)	ILIMIT	1561	1735	1908	mA	VIN = 5V, VOUT = 4.5V, RLIM = 15kΩ, -40°C ≤ TA ≤ +85°C	5
Current-Limit Threshold (Maximum DC Output Current)	ILIMIT	1196	1286	1376	mA	VIN = 5V, VOUT = 4.5V, RLIM = 20kΩ, TA = +25°C	5
Current-Limit Threshold (Maximum DC Output Current)	ILIMIT	1157	1286	1414	mA	VIN = 5V, VOUT = 4.5V, RLIM = 20kΩ, -40°C ≤ TA ≤ +85°C	5
Current-Limit Threshold (Maximum DC Output Current)	ILIMIT	456	490	524	mA	VIN = 5V, VOUT = 4.5V, RLIM = 49.9kΩ, TA = +25°C	5
Current-Limit Threshold (Maximum DC Output Current)	ILIMIT	441	490	539	mA	VIN = 5V, VOUT = 4.5V, RLIM = 49.9kΩ, -40°C ≤ TA ≤ +85°C	5
Current-Limit Threshold (Maximum DC Output Current)	ILIMIT	95	125	155	mA	VIN = 5V, VOUT = 4.5V, RLIM = 210kΩ, TA = +25°C	5
Current-Limit Threshold (Maximum DC Output Current)	ILIMIT	40	80	120	mA	VIN = 5V, VOUT = 4.5V, RLIM Shorted to GND	5
EN Input Leakage Current	ILEAK-EN	-2		2	µA	VIN = 5V, VEN = 0 and 5.5V	5
Turn-On Time	tON			4	ms	CL = 1µF, RL = 100Ω. See Figure 1	5
Turn-Off Time	tOFF			1	ms	CL = 1µF, RL = 100Ω. See Figure 1	5
Discharge Resistance	RDIS		600		Ω	VIN = 5V, Disabled, IOUT = 1mA	5
Short-Circuit Current Limit, OUT Connected to GND	ISHORT		700		mA	RLIM = 10kΩ, TA = +25°C	5
Short-Circuit Current Limit, OUT Connected to GND	ISHORT		470		mA	RLIM = 15kΩ, TA = +25°C	5
Short-Circuit Current Limit, OUT Connected to GND	ISHORT		350		mA	RLIM = 20kΩ, TA = +25°C	5
Short-Circuit Current Limit, OUT Connected to GND	ISHORT		140		mA	RLIM = 49.9kΩ, TA = +25°C	5
Short-Circuit Current Limit, OUT Connected to GND	ISHORT		35		mA	RLIM = 210kΩ, TA = +25°C	5
Short-Circuit Current Limit, OUT Connected to GND	ISHORT		80		mA	RLIM Shorted to GND, TA = +25°C	5
Reverse-Voltage Comparator Trip Point	VRVP		65		mV	VOUT - VIN	6
Reverse Current Limit	IROCP		0.32		A	VOUT - VIN = 150mV	6
Time from Reverse-Voltage Condition to MOSFET Turn Off	tTRIG	2	6	20	ms	VIN = 5V	6
FAULT Output Low Voltage	VOL			180	mV	IFAULT = 1mA	6
FAULT Off Current	IFOH			1	µA	VFAULT = 5.5V	6
FAULT Blanking Time	tBLANK	2	6	20	ms	Assertion or deassertion due to overcurrent and overtemperature condition	6
Thermal Shutdown Threshold	TSHDN		145		°C	Enabled	6
Thermal Shutdown Hysteresis	THYS		40		°C	Only for AP22652 and AP22653	6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part	Material	Colour / plating	Datasheet says	Page
contacts		tin	• Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 • Weight: 0.016 grams (Approximate)	16

CAD (KiCad official)

Symbol: AP22653W6-7
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-26, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
3D model files: ap22653w6-7-etched.step / ap22653w6-7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ap22653w6-7.step / ap22653w6-7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Diodes Incorporated datasheet (17 pp, sha256 b4b0d9edc2556bf4, retrieved 2026-11-10, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

AP22653W6-7

Verified AP22653W6-7

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README