component
AP2204K-3.0TRG1
Public Made by Adomby adom
MSKSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAP2204K-3.0TRG1
MSKSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
AP2204K-3.0TRG1 from MSKSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input of the supply voltage; the datasheet's recommended input voltage range is 2.0V to 24V. |
| 2 | GND | power_in | Ground pin; the input and output capacitor ground connections must return to this pin through as wide and as short a copper trace as is practical. |
| 3 | CE | input | Enable control input; the datasheet gives no logic threshold levels for this pin (electrical characteristics are specified with VEN = 5V). |
| 4 | NC | unconnected | No internal connection. |
| 5 | VOUT | power_out | Regulator output; the datasheet gives a 500mA output current rating and a current limit of 501mA minimum and 700mA typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage VIN | VIN | 2 | 24 | V | 6 | ||
| DC Output Voltage Accuracy | -2 | 2 | % | ILOAD =0.1mA | 6 | ||
| Line Regulation | ΔLINE | 0.3 | % | ILOAD =1mA, 5 ≤ VIN ≤ 30V | 6 | ||
| Load Regulation | ΔLOAD | 0.1 | % | 1mA≤ ILOAD ≤ 0.2A | 6 | ||
| Output Current Limit | ILIM | 501 | 700 | mA | VOUT =0 | 6 | |
| Thermal Shutdown Temperature | TSD | 160 | °C | ILOAD =10mA | 6 | ||
| Thermal Shutdown Hysteresis | ΔTSD | 15 | °C | 6 | |||
| VIN to GND | VIN | -0.3 | 28 | V | 5 | ||
| VOUT to VIN | VOUT-VIN | -28 | 0.3 | V | 5 | ||
| Lead Temperature (Soldering) | 260 | °C | 10 sec. | 5 | |||
| Junction Temperature | TJ | 150 | °C | 5 | |||
| Storage Temperature Range | -40 | 150 | °C | 5 | |||
| ESD Susceptibility HBM | HBM | 2 | KV | 5 | |||
| ESD Susceptibility MM | MM | 200 | V | 5 | |||
| Package Thermal Resistance | θJA | 200 | °C/W | 5 | |||
| Input Voltage | VIN | 2 | 24 | V | 5 | ||
| Junction Temperature Range | -40 | 125 | °C | 5 | |||
| Ambient Temperature Range | -40 | 85 | °C | 5 | |||
| Input Capacitor | 1 | μF | placed close to VIN and GND pins | 7 | |||
| Output Capacitor Effective Capacitance | 1 | 22 | μF | 7 | |||
| Output Capacitor ESR | ESR | 1 | mΩ | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | must be back to the AP2204K-X.XTRG1(MS) ground pin using as wide and as short of a copper trace as is practical | 7 |
CAD (KiCad official)
- Symbol:
AP2204K-3.0TRG1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ap2204k-3-0trg1-etched.step/ap2204k-3-0trg1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap2204k-3-0trg1.step/ap2204k-3-0trg1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (9 pp, sha256
8182de36bcf74c93, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).