component
AP2192ASG-13
Public Made by Adomby adom
Diodes Incorporated Power Distribution Switches, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAP2192ASG-13
Diodes Incorporated · Power Distribution Switches · SOIC-8
AP2192ASG-13 from Diodes Incorporated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin, the device ground reference for the two switches. |
| 2 | IN | power_in | Voltage input pin, specified for 2.7 V to 5.5 V operation with an absolute maximum input voltage of 6.5 V. |
| 3 | EN1 | input | Switch 1 enable input, active low on AP2182A and active high on AP2192A, with VIL maximum 0.8 V and VIH minimum 2 V. |
| 4 | EN2 | input | Switch 2 enable input, active low on AP2182A and active high on AP2192A, with VIL maximum 0.8 V and VIH minimum 2 V. |
| 5 | FLG2 | output | Switch 2 overcurrent and overtemperature fault report; open-drain output that goes active low after the 7 ms typical deglitch time when triggered. |
| 6 | OUT2 | power_out | Switch 2 voltage output, with a recommended maximum continuous load current of 1.5 A and a typical 2.0 A current limit per channel. |
| 7 | OUT1 | power_out | Switch 1 voltage output, with a recommended maximum continuous load current of 1.5 A and a typical 2.0 A current limit per channel. |
| 8 | FLG1 | output | Switch 1 overcurrent and overtemperature fault report; open-drain output that goes active low after the 7 ms typical deglitch time when triggered. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 2.7 | 5.5 | V | 3 | ||
| Output Current | IOUT | 0 | 1.5 | A | 3 | ||
| High-Level Input Voltage on EN | VIH | 2 | V | 3 | |||
| Low-Level Input Voltage on EN | VIL | 0 | 0.8 | V | 3 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 3 | ||
| ESD Protection, Human Body Model | ESD HBM | 2 | kV | Human Body Model | 3 | ||
| ESD Protection, Machine Model | ESD MM | 300 | V | Machine Model | 3 | ||
| Input Voltage | VIN | 6.5 | V | 3 | |||
| Enable Voltage | VEN, VFLG | 6.5 | V | 3 | |||
| Storage Temperature Range | TST | -65 | 150 | °C | 3 | ||
| Maximum Junction Temperature | TJ(MAX) | 150 | °C | 3 | |||
| Input UVLO | VUVLO | 1.6 | 2 | 2.4 | V | 4 | |
| Input Shutdown Current | ISHDN | 0.1 | 1 | µA | Disabled, IOUT = 0 | 4 | |
| Input Quiescent Current | IQ | 115 | 180 | µA | Dual Enabled, IOUT = 0 | 4 | |
| Input Leakage Current | ILEAK | 1 | µA | Disabled, OUT grounded | 4 | ||
| Reverse Leakage Current | IREV | 0.01 | 0.1 | µA | Disabled, VIN = 0V, VOUT = 5V, IREV at VIN | 4 | |
| Switch On-Resistance, SO-8 | RDS(ON) | 90 | 110 | mΩ | VIN = 5V, IOUT = 1.5A, TA = +25°C | 4 | |
| Switch On-Resistance | RDS(ON) | 135 | mΩ | VIN = 5V, IOUT = 1.5A, -40°C ≤ TA ≤ +85°C | 4 | ||
| Switch On-Resistance, SO-8 | RDS(ON) | 110 | 130 | mΩ | VIN = 3.3V, IOUT = 1.5A, TA = +25°C | 4 | |
| Switch On-Resistance | RDS(ON) | 170 | mΩ | VIN = 3.3V, IOUT = 1.5A, -40°C ≤ TA ≤ +85°C | 4 | ||
| Overload Current Limit | ILIMIT | 1.6 | 2 | 2.4 | A | VIN = 5V, VOUT = 4V, CL = 10µF, -40°C ≤ TA ≤ +85°C | 4 |
| Ganged Overload Current Limit | ILIMIT_G | 3.2 | 4 | 4.8 | A | VIN = 5V, VOUT = 4.6V, OUT1 & OUT2 tied together, CL = 10µF, -40°C ≤ TA ≤ +85°C | 4 |
| Ganged Short-Circuit Current | IOS_G | 3.2 | 4 | 4.8 | A | OUT1 & OUT2 connected to ground, device enabled into short-circuit, CL = 10µF | 4 |
| EN Input Logic Low Voltage | VIL | 0.8 | V | VIN = 2.7V to 5.5V | 4 | ||
| EN Input Logic High Voltage | VIH | 2 | V | VIN = 2.7V to 5.5V | 4 | ||
| EN Input Leakage | ISINK | 1 | µA | VEN = 0V to 5.5V | 4 | ||
| Output Leakage Current | ILEAK-O | 0.5 | 1 | µA | Disabled, VOUT = 0V | 4 | |
| Output Turn-On Rise Time | TR | 0.6 | 1.5 | ms | CL = 1µF, RLOAD = 5Ω | 4 | |
| Output Turn-Off Fall Time | TF | 0.05 | 0.3 | ms | CL = 1µF, RLOAD = 5Ω | 4 | |
| Output Turn-On Delay Time | TD(ON) | 0.2 | 0.5 | ms | CL = 100µF, RLOAD = 5Ω | 4 | |
| Output Turn-Off Delay Time | TD(OFF) | 0.1 | 0.3 | ms | CL = 100µF, RLOAD = 5Ω | 4 | |
| FLG Output FET On-Resistance | RFLG | 20 | 40 | Ω | IFLG = 10mA | 4 | |
| FLG Off Current | IFOH | 0.01 | 1 | µA | VFLG = 5V | 4 | |
| FLG Blanking Time | TBlank | 4 | 7 | 15 | ms | CL = 10µF | 4 |
| Current Limiting Trigger Threshold | ITrig | 2.5 | A | Output Current Slew rate (<100A/s), CL = 10µF | 4 | ||
| Ganged Current Limiting Trigger Threshold | ITrig_G | 5 | A | OUT1 & OUT2 tied together, Output Current Slew rate (<100A/s), CL = 10µF | 4 | ||
| Short-Circuit Current per Channel | IOS | 2 | A | OUTx connected to ground, device enabled into short circuit, CL = 10µF | 4 | ||
| Short-Circuit Response Time | TSHORT | 2 | µs | VOUT = 0V to IOUT = ILIMIT (output shorted to ground) | 4 | ||
| Discharge Resistance | RDIS | 100 | Ω | VIN = 5V, disabled, IOUT = 1mA | 4 | ||
| Thermal Shutdown Threshold | TSHDN | 140 | °C | Enabled, RLOAD = 1kΩ | 4 | ||
| Thermal Shutdown Hysteresis | THYS | 25 | °C | 4 | |||
| Thermal Resistance Junction-to-Ambient, SO-8 | θJA | 115 | °C/W | Note 7: FR-4 substrate PCB with minimum recommended pad layout | 4 |
CAD (KiCad official)
- Symbol:
AP2192ASG-13 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ap2192asg-13-etched.step/ap2192asg-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap2192asg-13.step/ap2192asg-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (16 pp, sha256
e687e6ce6e5393f3, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).