component
AP2161WG-7
Public Made by Adomby adom
Diodes Incorporated AC-DC Controllers and Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C176957). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+27−7
ap2161wg-7.lbr+20−2@@ -59,6 +59,18 @@ <smd name="3" x="-1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="4" x="1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="5" x="1.1375" y="0.9500" dx="1.3250" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.4500" y="1.5100"/>+ <vertex x="-1.6900" y="1.8400"/>+ <vertex x="-1.2100" y="1.8400"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.4000" y="1.4500"/>+ <vertex x="0.8000" y="1.4500"/>+ <vertex x="0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="1.0500"/>+ </polygon> <wire x1="-0.9100" y1="1.5600" x2="0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="1.5100" x2="-0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5100" width="0.1200" layer="21"/>@@ -68,7 +80,7 @@ <wire x1="0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5600" width="0.1200" layer="21"/> <text x="0" y="2.212" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.212" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.4500" y="1.5100"/><vertex x="-1.6900" y="1.8400"/><vertex x="-1.2100" y="1.8400"/></polygon></package>+</package> </packages> <symbols> <symbol name="AP2161WG-7">@@ -100,7 +112,13 @@ <connect gate="G$1" pin="IN" pad="5"/> <connect gate="G$1" pin="EN" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="AP2161WG-7" constant="no"/>+ <attribute name="MANUFACTURER" value="Diodes Incorporated" constant="no"/>+ <attribute name="LCSC_PN" value="C176957" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+7−5@@ -26,13 +26,15 @@ "model_3d_step": "ap2161wg-7.step", "lbr": "ap2161wg-7.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C176957"+ }, "pins": [ { "number": "1", "name": "OUT", "type": "power_out",- "description": "Switched voltage output pin. Delivers power to the load through the internal high-side power MOSFET (RDS(on) ≈ 95 mΩ typ). Recommended maximum continuous load current 1.0 A; internal current limit 1.5 A typ."+ "description": "Switched voltage output pin. Delivers power to the load through the internal high-side power MOSFET (RDS(on) \u2248 95 m\u03a9 typ). Recommended maximum continuous load current 1.0 A; internal current limit 1.5 A typ." }, { "number": "2",@@ -44,19 +46,19 @@ "number": "3", "name": "FLG", "type": "output",- "description": "Open-drain overcurrent / over-temperature fault report. Asserts active-low when a fault (over-current or thermal shutdown) is triggered, with a 7 ms typical blanking time. Requires an external pull-up resistor (e.g. 10 kΩ). FLG output FET on-resistance ≈ 20 Ω typ at IFLG = 10 mA."+ "description": "Open-drain overcurrent / over-temperature fault report. Asserts active-low when a fault (over-current or thermal shutdown) is triggered, with a 7 ms typical blanking time. Requires an external pull-up resistor (e.g. 10 k\u03a9). FLG output FET on-resistance \u2248 20 \u03a9 typ at IFLG = 10 mA." }, { "number": "4", "name": "EN", "type": "input",- "description": "Enable input. Active-low on AP2161: drive low to turn the switch ON, high to turn OFF. VIL ≤ 0.8 V, VIH ≥ 2.0 V. EN input leakage ≤ 1 µA at VEN = 5 V."+ "description": "Enable input. Active-low on AP2161: drive low to turn the switch ON, high to turn OFF. VIL \u2264 0.8 V, VIH \u2265 2.0 V. EN input leakage \u2264 1 \u00b5A at VEN = 5 V." }, { "number": "5", "name": "IN", "type": "power_in",- "description": "Input voltage pin. Operating range 2.7 V to 5.5 V; absolute maximum 6.5 V. Input UVLO ≈ 1.9 V typ. Input quiescent current 45 µA typ (enabled), shutdown current 0.5 µA typ."+ "description": "Input voltage pin. Operating range 2.7 V to 5.5 V; absolute maximum 6.5 V. Input UVLO \u2248 1.9 V typ. Input quiescent current 45 \u00b5A typ (enabled), shutdown current 0.5 \u00b5A typ." } ], "provenance": {